Re: i.MX6ul USB serial downloader and Barebox

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Patrick,

On Thu, Feb 21, 2019 at 10:01:27AM +0000, Patrick Schneider wrote:
> Hi guys,
> I'm trying to find out if the following is possible: In a production
> environment, there is only the USB connection present, no console
> access to the device.  The USB serial downloader mode starts and I am
> able to load a barebox image to the i.MX6ul RAM. That works either
> with MFGTools or uuu.

I recommend imx-usb-loader which is part of barebox ;)

> But how to proceed from there? Is there any way
> to really flash the barebox image and also the rootFS into a onboard
> NAND over the USB serial downloader mode with barebox in RAM?  All
> examples, guides and tutorials use u-boot so I'm kinda stuck here.

barebox can do fastboot. "usbgagdet -A /dev/mmc0(foo)" will export
/dev/mmc0 as a fastboot partition to the host. Add the -a option and
you'll get a console device on the host.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox



[Index of Archives]     [Linux Embedded]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux