Import a subset of clk_bulk API from Linux to support porting kernel
code that uses it.
Signed-off-by: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
---
drivers/clk/Makefile | 3 +-
drivers/clk/clk-bulk.c | 102 +++++++++++++++++++++++++++++++++++++++++
include/linux/clk.h | 98 +++++++++++++++++++++++++++++++++++++++
3 files changed, 202 insertions(+), 1 deletion(-)
create mode 100644 drivers/clk/clk-bulk.c
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index cd4026c94..34c44fff9 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -1,7 +1,8 @@
obj-$(CONFIG_COMMON_CLK) += clk.o clk-fixed.o clk-divider.o clk-fixed-factor.o \
clk-mux.o clk-gate.o clk-composite.o \
clk-fractional-divider.o clk-conf.o \
- clk-gate-shared.o clk-gpio.o
+ clk-gate-shared.o clk-gpio.o \
+ clk-bulk.o
obj-$(CONFIG_CLKDEV_LOOKUP) += clkdev.o
obj-$(CONFIG_ARCH_MVEBU) += mvebu/
diff --git a/drivers/clk/clk-bulk.c b/drivers/clk/clk-bulk.c
new file mode 100644
index 000000000..ddbe32f9c
--- /dev/null
+++ b/drivers/clk/clk-bulk.c
@@ -0,0 +1,102 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2017 NXP
+ *
+ * Dong Aisheng <aisheng.dong@xxxxxxx>
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <malloc.h>
+#include <stringlist.h>
+#include <complete.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/clk/clk-conf.h>
+
+void clk_bulk_put(int num_clks, struct clk_bulk_data *clks)
+{
+ while (--num_clks >= 0) {
+ clk_put(clks[num_clks].clk);
+ clks[num_clks].clk = NULL;
+ }
+}
+EXPORT_SYMBOL_GPL(clk_bulk_put);
+
+int __must_check clk_bulk_get(struct device_d *dev, int num_clks,
+ struct clk_bulk_data *clks)
+{
+ int ret;
+ int i;
+
+ for (i = 0; i < num_clks; i++)
+ clks[i].clk = NULL;
+
+ for (i = 0; i < num_clks; i++) {
+ clks[i].clk = clk_get(dev, clks[i].id);
+ if (IS_ERR(clks[i].clk)) {
+ ret = PTR_ERR(clks[i].clk);
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "Failed to get clk '%s': %d\n",
+ clks[i].id, ret);
+ clks[i].clk = NULL;
+ goto err;
+ }
+ }
+
+ return 0;
+
+err:
+ clk_bulk_put(i, clks);
+
+ return ret;
+}
+EXPORT_SYMBOL(clk_bulk_get);
+
+/**
+ * clk_bulk_disable - gate a set of clocks
+ * @num_clks: the number of clk_bulk_data
+ * @clks: the clk_bulk_data table being gated
+ *
+ * clk_bulk_disable must not sleep, which differentiates it from
+ * clk_bulk_unprepare. clk_bulk_disable must be called before
+ * clk_bulk_unprepare.
+ */
+void clk_bulk_disable(int num_clks, const struct clk_bulk_data *clks)
+{
+
+ while (--num_clks >= 0)
+ clk_disable(clks[num_clks].clk);
+}
+EXPORT_SYMBOL_GPL(clk_bulk_disable);
+
+/**
+ * clk_bulk_enable - ungate a set of clocks
+ * @num_clks: the number of clk_bulk_data
+ * @clks: the clk_bulk_data table being ungated
+ *
+ * clk_bulk_enable must not sleep
+ * Returns 0 on success, -EERROR otherwise.
+ */
+int __must_check clk_bulk_enable(int num_clks, const struct clk_bulk_data *clks)
+{
+ int ret;
+ int i;
+
+ for (i = 0; i < num_clks; i++) {
+ ret = clk_enable(clks[i].clk);
+ if (ret) {
+ pr_err("Failed to enable clk '%s': %d\n",
+ clks[i].id, ret);
+ goto err;
+ }
+ }
+
+ return 0;
+
+err:
+ clk_bulk_disable(i, clks);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(clk_bulk_enable);
diff --git a/include/linux/clk.h b/include/linux/clk.h
index 38c86e0b4..961fc89ba 100644
--- a/include/linux/clk.h
+++ b/include/linux/clk.h
@@ -25,6 +25,22 @@ struct device_d;
*/
struct clk;
+/**
+ * struct clk_bulk_data - Data used for bulk clk operations.
+ *
+ * @id: clock consumer ID
+ * @clk: struct clk * to store the associated clock
+ *
+ * The CLK APIs provide a series of clk_bulk_() API calls as
+ * a convenience to consumers which require multiple clks. This
+ * structure is used to manage data for these calls.
+ */
+struct clk_bulk_data {
+ const char *id;
+ struct clk *clk;
+};
+
+
#ifdef CONFIG_HAVE_CLK
/**
@@ -44,6 +60,29 @@ struct clk;
*/
struct clk *clk_get(struct device_d *dev, const char *id);
+/**
+ * clk_bulk_get - lookup and obtain a number of references to clock producer.
+ * @dev: device for clock "consumer"
+ * @num_clks: the number of clk_bulk_data
+ * @clks: the clk_bulk_data table of consumer
+ *
+ * This helper function allows drivers to get several clk consumers in one
+ * operation. If any of the clk cannot be acquired then any clks
+ * that were obtained will be freed before returning to the caller.
+ *
+ * Returns 0 if all clocks specified in clk_bulk_data table are obtained
+ * successfully, or valid IS_ERR() condition containing errno.
+ * The implementation uses @dev and @clk_bulk_data.id to determine the
+ * clock consumer, and thereby the clock producer.
+ * The clock returned is stored in each @clk_bulk_data.clk field.
+ *
+ * Drivers must assume that the clock source is not enabled.
+ *
+ * clk_bulk_get should not be called from within interrupt context.
+ */
+int __must_check clk_bulk_get(struct device_d *dev, int num_clks,
+ struct clk_bulk_data *clks);
+
/**
* clk_enable - inform the system when the clock source should be running.
* @clk: clock source
@@ -54,6 +93,18 @@ struct clk *clk_get(struct device_d *dev, const char *id);
*/
int clk_enable(struct clk *clk);
+/**
+ * clk_bulk_enable - inform the system when the set of clks should be running.
+ * @num_clks: the number of clk_bulk_data
+ * @clks: the clk_bulk_data table of consumer
+ *
+ * May be called from atomic contexts.
+ *
+ * Returns success (0) or negative errno.
+ */
+int __must_check clk_bulk_enable(int num_clks,
+ const struct clk_bulk_data *clks);
+
/**
* clk_disable - inform the system when the clock source is no longer required.
* @clk: clock source
@@ -68,6 +119,24 @@ int clk_enable(struct clk *clk);
*/
void clk_disable(struct clk *clk);
+/**
+ * clk_bulk_disable - inform the system when the set of clks is no
+ * longer required.
+ * @num_clks: the number of clk_bulk_data
+ * @clks: the clk_bulk_data table of consumer
+ *
+ * Inform the system that a set of clks is no longer required by
+ * a driver and may be shut down.
+ *
+ * May be called from atomic contexts.
+ *
+ * Implementation detail: if the set of clks is shared between
+ * multiple drivers, clk_bulk_enable() calls must be balanced by the
+ * same number of clk_bulk_disable() calls for the clock source to be
+ * disabled.
+ */
+void clk_bulk_disable(int num_clks, const struct clk_bulk_data *clks);
+
/**
* clk_get_rate - obtain the current clock rate (in Hz) for a clock source.
* This is only valid once the clock source has been enabled.
@@ -75,6 +144,19 @@ void clk_disable(struct clk *clk);
*/
unsigned long clk_get_rate(struct clk *clk);
+/**
+ * clk_bulk_put - "free" the clock source
+ * @num_clks: the number of clk_bulk_data
+ * @clks: the clk_bulk_data table of consumer
+ *
+ * Note: drivers must ensure that all clk_bulk_enable calls made on this
+ * clock source are balanced by clk_bulk_disable calls prior to calling
+ * this function.
+ *
+ * clk_bulk_put should not be called from within interrupt context.
+ */
+void clk_bulk_put(int num_clks, struct clk_bulk_data *clks);
+
/*
* The remaining APIs are optional for machine class support.
*/
@@ -153,15 +235,31 @@ static inline struct clk *clk_get(struct device_d *dev, const char *id)
return NULL;
}
+static inline int __must_check clk_bulk_get(struct device_d *dev, int num_clks,
+ struct clk_bulk_data *clks)
+{
+ return 0;
+}
+
+static inline void clk_bulk_put(int num_clks, struct clk_bulk_data *clks) {}
+
static inline int clk_enable(struct clk *clk)
{
return 0;
}
+static inline int __must_check clk_bulk_enable(int num_clks, struct clk_bulk_data *clks)
+{
+ return 0;
+}
+
static inline void clk_disable(struct clk *clk)
{
}
+static inline void clk_bulk_disable(int num_clks,
+ struct clk_bulk_data *clks) {}
+
static inline unsigned long clk_get_rate(struct clk *clk)
{
return 0;
--
2.20.1
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
