Hello, I noticed these issues while preparing v2 of the sama5d3 first stage patch set. As they are applicable on their own, I am sending them out as a separate patch set. They apply on top of Sam's "at91: Support PMC clock bindings" v3, but I guess, they should apply on top of v4 as well. Cheers Ahmad Ahmad Fatoum (4): ARM: at91: replace __raw_{readl,writel} of peripherals with readl,writel ARM: at91: debug_ll: make UART base address configurable ARM: at91: fix at91sama5_get_ddram_size for sama5d4 ARM: at91: remove duplicate get_ddram_size code arch/arm/boards/at91rm9200ek/lowlevel.c | 40 ++++----- arch/arm/boards/sama5d3_xplained/lowlevel.c | 2 +- arch/arm/boards/sama5d3xek/lowlevel.c | 2 +- arch/arm/boards/sama5d4_xplained/lowlevel.c | 2 +- arch/arm/boards/sama5d4ek/lowlevel.c | 2 +- arch/arm/mach-at91/Kconfig | 23 ++--- .../include/mach/at91sam926x_board_init.h | 22 ++--- .../mach-at91/include/mach/at91sam9_ddrsdr.h | 37 ++------ .../mach-at91/include/mach/at91sam9_sdramc.h | 4 +- arch/arm/mach-at91/include/mach/debug_ll.h | 12 +-- arch/arm/mach-at91/include/mach/gpio.h | 56 ++++++------ arch/arm/mach-at91/sam9_smc.c | 58 ++++++------- arch/arm/mach-at91/sama5d3_devices.c | 2 +- arch/arm/mach-at91/sama5d4_devices.c | 2 +- arch/arm/mach-at91/setup.c | 4 +- common/Kconfig | 14 +++ drivers/clocksource/timer-atmel-pit.c | 4 +- drivers/mci/atmel-mci-regs.h | 4 +- drivers/net/at91_ether.h | 4 +- drivers/net/macb.h | 8 +- drivers/pinctrl/pinctrl-at91.c | 28 +++--- drivers/spi/atmel_spi.h | 4 +- drivers/usb/gadget/at91_udc.c | 86 +++++++++---------- drivers/video/atmel_lcdfb.h | 4 +- 24 files changed, 197 insertions(+), 227 deletions(-) -- 2.20.1 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox