Update am335x-phytec som device trees and use phy-handle instead of phy_id. Signed-off-by: Teresa Remmet <t.remmet@xxxxxxxxx> --- arch/arm/dts/am335x-phytec-phycard-som.dtsi | 7 ++++++- arch/arm/dts/am335x-phytec-phycore-som.dtsi | 7 ++++++- arch/arm/dts/am335x-phytec-phyflex-som.dtsi | 12 ++++++++++-- 3 files changed, 22 insertions(+), 4 deletions(-) diff --git a/arch/arm/dts/am335x-phytec-phycard-som.dtsi b/arch/arm/dts/am335x-phytec-phycard-som.dtsi index 6a0442916bcb..2320ca18070f 100644 --- a/arch/arm/dts/am335x-phytec-phycard-som.dtsi +++ b/arch/arm/dts/am335x-phytec-phycard-som.dtsi @@ -122,6 +122,10 @@ pinctrl-names = "default"; pinctrl-0 = <&davinci_mdio_default>; status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; }; &phy_sel { @@ -129,8 +133,9 @@ }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; + phy-handle = <&phy0>; phy-mode = "rmii"; + dual_emac_res_vlan = <1>; }; &mac { diff --git a/arch/arm/dts/am335x-phytec-phycore-som.dtsi b/arch/arm/dts/am335x-phytec-phycore-som.dtsi index cb2d30a15ccd..0601f5ab7ba5 100644 --- a/arch/arm/dts/am335x-phytec-phycore-som.dtsi +++ b/arch/arm/dts/am335x-phytec-phycore-som.dtsi @@ -244,6 +244,10 @@ pinctrl-names = "default"; pinctrl-0 = <&davinci_mdio_default>; status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; }; &phy_sel { @@ -251,8 +255,9 @@ }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; + phy-handle = <&phy0>; phy-mode = "rmii"; + dual_emac_res_vlan = <1>; }; &mac { diff --git a/arch/arm/dts/am335x-phytec-phyflex-som.dtsi b/arch/arm/dts/am335x-phytec-phyflex-som.dtsi index 465d3fa16cd7..4d0a91398843 100644 --- a/arch/arm/dts/am335x-phytec-phyflex-som.dtsi +++ b/arch/arm/dts/am335x-phytec-phyflex-som.dtsi @@ -197,6 +197,14 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = <&davinci_mdio_default>; status = "okay"; + + phy0: ethernet-phy@0 { + reg = <1>; + }; + + phy1: ethernet-phy@1 { + reg = <2>; + }; }; &phy_sel { @@ -204,7 +212,7 @@ }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <1>; + phy-handle = <&phy0>; phy-mode = "rgmii"; dual_emac_res_vlan = <1>; @@ -221,7 +229,7 @@ }; &cpsw_emac1 { - phy_id = <&davinci_mdio>, <2>; + phy-handle = <&phy1>; phy-mode = "rmii"; dual_emac_res_vlan = <2>; status = "disabled"; -- 2.7.4 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox