Update am335x-phytec som device trees and use phy-handle instead of phy_id.
Signed-off-by: Teresa Remmet <t.remmet@xxxxxxxxx>
---
arch/arm/dts/am335x-phytec-phycard-som.dtsi | 7 ++++++-
arch/arm/dts/am335x-phytec-phycore-som.dtsi | 7 ++++++-
arch/arm/dts/am335x-phytec-phyflex-som.dtsi | 12 ++++++++++--
3 files changed, 22 insertions(+), 4 deletions(-)
diff --git a/arch/arm/dts/am335x-phytec-phycard-som.dtsi b/arch/arm/dts/am335x-phytec-phycard-som.dtsi
index 6a0442916bcb..2320ca18070f 100644
--- a/arch/arm/dts/am335x-phytec-phycard-som.dtsi
+++ b/arch/arm/dts/am335x-phytec-phycard-som.dtsi
@@ -122,6 +122,10 @@
pinctrl-names = "default";
pinctrl-0 = <&davinci_mdio_default>;
status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
};
&phy_sel {
@@ -129,8 +133,9 @@
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <0>;
+ phy-handle = <&phy0>;
phy-mode = "rmii";
+ dual_emac_res_vlan = <1>;
};
&mac {
diff --git a/arch/arm/dts/am335x-phytec-phycore-som.dtsi b/arch/arm/dts/am335x-phytec-phycore-som.dtsi
index cb2d30a15ccd..0601f5ab7ba5 100644
--- a/arch/arm/dts/am335x-phytec-phycore-som.dtsi
+++ b/arch/arm/dts/am335x-phytec-phycore-som.dtsi
@@ -244,6 +244,10 @@
pinctrl-names = "default";
pinctrl-0 = <&davinci_mdio_default>;
status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
};
&phy_sel {
@@ -251,8 +255,9 @@
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <0>;
+ phy-handle = <&phy0>;
phy-mode = "rmii";
+ dual_emac_res_vlan = <1>;
};
&mac {
diff --git a/arch/arm/dts/am335x-phytec-phyflex-som.dtsi b/arch/arm/dts/am335x-phytec-phyflex-som.dtsi
index 465d3fa16cd7..4d0a91398843 100644
--- a/arch/arm/dts/am335x-phytec-phyflex-som.dtsi
+++ b/arch/arm/dts/am335x-phytec-phyflex-som.dtsi
@@ -197,6 +197,14 @@
pinctrl-names = "default", "sleep";
pinctrl-0 = <&davinci_mdio_default>;
status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <1>;
+ };
+
+ phy1: ethernet-phy@1 {
+ reg = <2>;
+ };
};
&phy_sel {
@@ -204,7 +212,7 @@
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <1>;
+ phy-handle = <&phy0>;
phy-mode = "rgmii";
dual_emac_res_vlan = <1>;
@@ -221,7 +229,7 @@
};
&cpsw_emac1 {
- phy_id = <&davinci_mdio>, <2>;
+ phy-handle = <&phy1>;
phy-mode = "rmii";
dual_emac_res_vlan = <2>;
status = "disabled";
--
2.7.4
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
