This adds support for the esdhc controller found on Layerscape SoCs.
This means adding the compatible and a driver data to access the
controller in bigendian mode.
Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
---
drivers/mci/Kconfig | 2 +-
drivers/mci/imx-esdhc.c | 11 +++++++++++
2 files changed, 12 insertions(+), 1 deletion(-)
diff --git a/drivers/mci/Kconfig b/drivers/mci/Kconfig
index 954f957bc7..2075151d67 100644
--- a/drivers/mci/Kconfig
+++ b/drivers/mci/Kconfig
@@ -82,7 +82,7 @@ config MCI_IMX
config MCI_IMX_ESDHC
bool "i.MX esdhc"
- depends on ARCH_IMX
+ depends on ARCH_IMX || ARCH_LAYERSCAPE
help
Enable this entry to add support to read and write SD cards on a
Freescale i.MX25/35/51 based system.
diff --git a/drivers/mci/imx-esdhc.c b/drivers/mci/imx-esdhc.c
index 58c262782f..10c981ad5d 100644
--- a/drivers/mci/imx-esdhc.c
+++ b/drivers/mci/imx-esdhc.c
@@ -69,6 +69,8 @@
#define ESDHC_FLAG_HAVE_CAP1 BIT(6)
/* Need to access registers in bigendian mode */
#define ESDHC_FLAG_BIGENDIAN BIT(7)
+/* Enable cache snooping */
+#define ESDHC_FLAG_CACHE_SNOOPING BIT(8)
/*
* The IP has errata ERR004536
@@ -612,6 +614,10 @@ static int esdhc_init(struct mci_host *mci, struct device_d *dev)
/* RSTA doesn't reset MMC_BOOT register, so manually reset it */
esdhc_write32(host, SDHCI_MMC_BOOT, 0);
+ /* Enable cache snooping */
+ if (host->socdata->flags & ESDHC_FLAG_CACHE_SNOOPING)
+ esdhc_write32(host, 0x40c, 0x40);
+
/* Set the initial clock speed */
set_sysctl(mci, 400000);
@@ -747,6 +753,10 @@ static struct esdhc_soc_data usdhc_imx6sx_data = {
.clkidx = "per",
};
+static struct esdhc_soc_data esdhc_ls_data = {
+ .flags = ESDHC_FLAG_MULTIBLK_NO_INT | ESDHC_FLAG_BIGENDIAN,
+};
+
static __maybe_unused struct of_device_id fsl_esdhc_compatible[] = {
{ .compatible = "fsl,imx25-esdhc", .data = &esdhc_imx25_data },
{ .compatible = "fsl,imx50-esdhc", .data = &esdhc_imx53_data },
@@ -756,6 +766,7 @@ static __maybe_unused struct of_device_id fsl_esdhc_compatible[] = {
{ .compatible = "fsl,imx6sl-usdhc", .data = &usdhc_imx6sl_data },
{ .compatible = "fsl,imx6sx-usdhc", .data = &usdhc_imx6sx_data },
{ .compatible = "fsl,imx8mq-usdhc", .data = &usdhc_imx6sx_data },
+ { .compatible = "fsl,ls1046a-esdhc",.data = &esdhc_ls_data },
{ /* sentinel */ }
};
--
2.20.1
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
