[PATCH 08/11] ARM: at91: import lowlevel dbgu UART init code from at91bootstrap

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Ahmad Fatoum <ahmad@xxxxxx>

For use in PBL, import dbgu init code from:
https://github.com/linux4sam/at91bootstrap/blob/v3.8.12/driver/at91_usart.c

Signed-off-by: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
---
 arch/arm/mach-at91/include/mach/at91_dbgu.h | 57 ++++++++++++++++++++-
 1 file changed, 56 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-at91/include/mach/at91_dbgu.h b/arch/arm/mach-at91/include/mach/at91_dbgu.h
index 3b5948566e52..a6f44f744f2a 100644
--- a/arch/arm/mach-at91/include/mach/at91_dbgu.h
+++ b/arch/arm/mach-at91/include/mach/at91_dbgu.h
@@ -5,7 +5,7 @@
  * Copyright (C) SAN People
  *
  * Debug Unit (DBGU) - System peripherals registers.
- * Based on AT91RM9200 datasheet revision E.
+ * Based on AT91RM9200 datasheet revision E and SAMA5D3 datasheet revision B.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -16,9 +16,37 @@
 #ifndef AT91_DBGU_H
 #define AT91_DBGU_H
 
+#include <asm/io.h>
+
 #if !defined(CONFIG_ARCH_AT91X40)
 #define AT91_DBGU_CR		(0x00)	/* Control Register */
+#define 	AT91_DBGU_RSTRX		(1 << 2)		/* Reset Receiver */
+#define 	AT91_DBGU_RSTTX		(1 << 3)		/* Reset Transmitter */
+#define 	AT91_DBGU_RXEN		(1 << 4)		/* Receiver Enable */
+#define 	AT91_DBGU_RXDIS		(1 << 5)		/* Receiver Disable */
+#define 	AT91_DBGU_TXEN		(1 << 6)		/* Transmitter Enable */
+#define 	AT91_DBGU_TXDIS		(1 << 7)		/* Transmitter Disable */
+#define 	AT91_DBGU_RSTSTA	(1 << 8)		/* Reset Status Bits */
 #define AT91_DBGU_MR		(0x04)	/* Mode Register */
+#define		AT91_DBGU_NBSTOP_1BIT		(0 << 12) /* 1 stop bit */
+#define		AT91_DBGU_NBSTOP_1_5BIT	(1 << 12) /* 1.5 stop bits */
+#define		AT91_DBGU_NBSTOP_2BIT		(2 << 12) /* 2 stop bits */
+
+#define		AT91_DBGU_CHRL_5BIT	(0 << 6) /* 5 bit character length */
+#define		AT91_DBGU_CHRL_6BIT	(1 << 6) /* 6 bit character length */
+#define		AT91_DBGU_CHRL_7BIT	(2 << 6) /* 7 bit character length */
+#define		AT91_DBGU_CHRL_8BIT	(3 << 6) /* 8 bit character length */
+
+#define 	AT91_DBGU_PAR_EVEN	(0 << 9)		/* Even Parity */
+#define 	AT91_DBGU_PAR_ODD	(1 << 9)		/* Odd Parity */
+#define 	AT91_DBGU_PAR_SPACE	(2 << 9)		/* Space: Force Parity to 0 */
+#define 	AT91_DBGU_PAR_MARK	(3 << 9)		/* Mark: Force Parity to 1 */
+#define 	AT91_DBGU_PAR_NONE	(4 << 9)		/* No Parity */
+
+#define 	AT91_DBGU_CHMODE_NORMAL	(0 << 14) /* Normal mode */
+#define 	AT91_DBGU_CHMODE_AUTO		(1 << 14) /* Automatic Echo */
+#define 	AT91_DBGU_CHMODE_LOCAL		(2 << 14) /* Local Loopback */
+#define 	AT91_DBGU_CHMODE_REMOTE	(3 << 14) /* Remote Loopback */
 #define AT91_DBGU_IER		(0x08)	/* Interrupt Enable Register */
 #define		AT91_DBGU_TXRDY		(1 << 1)		/* Transmitter Ready */
 #define		AT91_DBGU_TXEMPTY	(1 << 9)		/* Transmitter Empty */
@@ -63,4 +91,31 @@
 #define		AT91_CIDR_NVPTYP	(7    << 28)		/* Nonvolatile Program Memory Type */
 #define		AT91_CIDR_EXT		(1    << 31)		/* Extension Flag */
 
+#ifndef __ASSEMBLY__
+#ifdef CONFIG_DEBUG_LL
+static inline void at91_dbgu_setup_ll(unsigned long dbgu_base, unsigned baudrate)
+{
+	__raw_writel(~0, dbgu_base + AT91_DBGU_IDR);
+
+	__raw_writel(AT91_DBGU_RSTRX
+		     | AT91_DBGU_RSTTX
+		     | AT91_DBGU_RXDIS
+		     | AT91_DBGU_TXDIS,
+		     dbgu_base + AT91_DBGU_CR);
+
+	__raw_writel(baudrate, dbgu_base + AT91_DBGU_BRGR);
+
+	__raw_writel(AT91_DBGU_PAR_NONE
+		     | AT91_DBGU_CHMODE_NORMAL
+		     | AT91_DBGU_CHRL_8BIT
+		     | AT91_DBGU_NBSTOP_1BIT,
+		     dbgu_base + AT91_DBGU_MR);
+
+	__raw_writel(AT91_DBGU_RXEN | AT91_DBGU_TXEN, dbgu_base + AT91_DBGU_CR);
+}
+#else
+static inline void at91_dbgu_setup_ll(unsigned long dbgu_base, unsigned baudrate) {}
+#endif
+#endif
+
 #endif
-- 
2.20.1


_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox



[Index of Archives]     [Linux Embedded]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux