For boards built with multiimage support imxcfg-y is not needed. Remove it for these boards. Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> --- arch/arm/Makefile | 3 --- 1 file changed, 3 deletions(-) diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 0fd63105d7..6b5f21a7a9 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -252,15 +252,12 @@ barebox.imximg: $(KBUILD_BINARY) FORCE boarddir = $(srctree)/arch/arm/boards imxcfg-$(CONFIG_MACH_FREESCALE_MX53_SMD) += $(boarddir)/freescale-mx53-smd/flash-header.imxcfg imxcfg-$(CONFIG_MACH_TX51) += $(boarddir)/karo-tx51/flash-header-karo-tx51.imxcfg -imxcfg-$(CONFIG_MACH_GUF_VINCELL) += $(boarddir)/guf-vincell/flash-header.imxcfg imxcfg-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += $(boarddir)/eukrea_cpuimx51/flash-header.imxcfg imxcfg-$(CONFIG_MACH_FREESCALE_MX25_3STACK) += $(boarddir)/freescale-mx25-3ds/flash-header.imxcfg imxcfg-$(CONFIG_MACH_FREESCALE_MX35_3STACK) += $(boarddir)/freescale-mx35-3ds/flash-header.imxcfg -imxcfg-$(CONFIG_MACH_TQMA53) += $(boarddir)/tqma53/flash-header.imxcfg imxcfg-$(CONFIG_MACH_EUKREA_CPUIMX25) += $(boarddir)/eukrea_cpuimx25/flash-header.imxcfg imxcfg-$(CONFIG_MACH_EUKREA_CPUIMX35) += $(boarddir)/eukrea_cpuimx35/flash-header.imxcfg imxcfg-$(CONFIG_MACH_PCM043) += $(boarddir)/phytec-phycore-imx35/flash-header.imxcfg -imxcfg-$(CONFIG_MACH_KINDLE3) += $(boarddir)/kindle3/flash-header.imxcfg ifneq ($(imxcfg-y),) CFG_barebox.imximg := $(imxcfg-y) KBUILD_IMAGE := barebox.imximg -- 2.20.1 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
