On Tue, Jan 15, 2019 at 12:26 PM Andrey Smirnov
<andrew.smirnov@xxxxxxxxx> wrote:
>
> Port a subset of Linux driver sufficient enough to support feature
> needed for PCIe on i.MX7.
>
> Signed-off-by: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
> ---
> drivers/regulator/Kconfig | 8 ++
> drivers/regulator/Makefile | 3 +-
> drivers/regulator/anatop-regulator.c | 161 +++++++++++++++++++++++++++
> 3 files changed, 171 insertions(+), 1 deletion(-)
> create mode 100644 drivers/regulator/anatop-regulator.c
>
> diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
> index 92db8dc0e0..c734ef5ef9 100644
> --- a/drivers/regulator/Kconfig
> +++ b/drivers/regulator/Kconfig
> @@ -21,4 +21,12 @@ config REGULATOR_PFUZE
> depends on I2C
> depends on ARCH_IMX6
>
> +config REGULATOR_ANATOP
> + tristate "Freescale i.MX on-chip ANATOP LDO regulators"
> + depends on MFD_SYSCON
> + help
> + Say y here to support Freescale i.MX on-chip ANATOP LDOs
> + regulators. It is recommended that this option be
> + enabled on i.MX6 platform.
> +
> endif
> diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
> index 36ce3e87f7..b2fc5b79b6 100644
> --- a/drivers/regulator/Makefile
> +++ b/drivers/regulator/Makefile
> @@ -1,4 +1,5 @@
> obj-$(CONFIG_REGULATOR) += core.o helpers.o
> obj-$(CONFIG_REGULATOR_FIXED) += fixed.o
> obj-$(CONFIG_REGULATOR_BCM283X) += bcm2835.o
> -obj-$(CONFIG_REGULATOR_PFUZE) += pfuze.o
> \ No newline at end of file
> +obj-$(CONFIG_REGULATOR_PFUZE) += pfuze.o
> +obj-$(CONFIG_REGULATOR_ANATOP) += anatop-regulator.o
> \ No newline at end of file
> diff --git a/drivers/regulator/anatop-regulator.c b/drivers/regulator/anatop-regulator.c
> new file mode 100644
> index 0000000000..3944fd592c
> --- /dev/null
> +++ b/drivers/regulator/anatop-regulator.c
> @@ -0,0 +1,161 @@
> +/*
> + * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
> + */
> +
> +/*
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> +
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> +
> + * You should have received a copy of the GNU General Public License along
> + * with this program; if not, write to the Free Software Foundation, Inc.,
> + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
> + */
> +
> +#include <common.h>
> +#include <init.h>
> +#include <mfd/syscon.h>
> +#include <regmap.h>
> +#include <regulator.h>
> +
> +struct anatop_regulator {
> + u32 control_reg;
> + struct regmap *anatop;
> + int vol_bit_shift;
> + int vol_bit_width;
> + u32 delay_reg;
> + int delay_bit_shift;
> + int delay_bit_width;
> + int min_bit_val;
> + int min_voltage;
> + int max_voltage;
> +
> + struct regulator_dev rdev;
> + struct regulator_desc rdesc;
> +
> + bool bypass;
> + int sel;
> +};
> +
> +static struct regulator_ops anatop_rops = {
> + .set_voltage_sel = regulator_set_voltage_sel_regmap,
> + .list_voltage = regulator_list_voltage_linear,
> +};
> +
> +static int anatop_regulator_probe(struct device_d *dev)
> +{
> + struct device_node *np = dev->device_node;
> + struct device_node *anatop_np;
> + struct regulator_desc *rdesc;
> + struct regulator_dev *rdev;
> + struct anatop_regulator *sreg;
> + int ret = 0;
> +
> + sreg = xzalloc(sizeof(*sreg));
> + rdesc = &sreg->rdesc;
> + rdev = &sreg->rdev;
> +
> + anatop_np = of_get_parent(np);
> + if (!anatop_np)
> + return -ENODEV;
> +
> + rdev->desc = rdesc;
> + rdev->regmap = syscon_node_to_regmap(anatop_np);
> + if (IS_ERR(rdev->regmap))
> + return PTR_ERR(rdev->regmap);
> +
> + ret = of_property_read_u32(np, "anatop-reg-offset",
> + &sreg->control_reg);
> + if (ret) {
> + dev_err(dev, "no anatop-reg-offset property set\n");
> + return ret;
> + }
> + ret = of_property_read_u32(np, "anatop-vol-bit-width",
> + &sreg->vol_bit_width);
> + if (ret) {
> + dev_err(dev, "no anatop-vol-bit-width property set\n");
> + return ret;
> + }
> + ret = of_property_read_u32(np, "anatop-vol-bit-shift",
> + &sreg->vol_bit_shift);
> + if (ret) {
> + dev_err(dev, "no anatop-vol-bit-shift property set\n");
> + return ret;
> + }
> + ret = of_property_read_u32(np, "anatop-min-bit-val",
> + &sreg->min_bit_val);
> + if (ret) {
> + dev_err(dev, "no anatop-min-bit-val property set\n");
> + return ret;
> + }
> + ret = of_property_read_u32(np, "anatop-min-voltage",
> + &sreg->min_voltage);
> + if (ret) {
> + dev_err(dev, "no anatop-min-voltage property set\n");
> + return ret;
> + }
> + ret = of_property_read_u32(np, "anatop-max-voltage",
> + &sreg->max_voltage);
> + if (ret) {
> + dev_err(dev, "no anatop-max-voltage property set\n");
> + return ret;
> + }
> +
> + /* read LDO ramp up setting, only for core reg */
> + of_property_read_u32(np, "anatop-delay-reg-offset",
> + &sreg->delay_reg);
> + of_property_read_u32(np, "anatop-delay-bit-width",
> + &sreg->delay_bit_width);
> + of_property_read_u32(np, "anatop-delay-bit-shift",
> + &sreg->delay_bit_shift);
> +
> + rdesc->n_voltages = (sreg->max_voltage - sreg->min_voltage) / 25000 + 1
> + + sreg->min_bit_val;
> + rdesc->min_uV = sreg->min_voltage;
> + rdesc->uV_step = 25000;
> + rdesc->linear_min_sel = sreg->min_bit_val;
> + rdesc->vsel_reg = sreg->control_reg;
> + rdesc->vsel_mask = GENMASK(sreg->vol_bit_width + sreg->vol_bit_shift,
> + sreg->vol_bit_shift);
> +
> + /* Only core regulators have the ramp up delay configuration. */
> + if (sreg->control_reg && sreg->delay_bit_width) {
> + free(sreg);
> + return -ENODEV;
Ugh, missed the fact that I need to return 0 here to avoid bogus boot
error messages. I'll either send a separte fixup or spin a v4 if more
changes are necessary.
Thanks,
Andrey Smirnov
> + } else {
> + u32 enable_bit;
> +
> + rdesc->ops = &anatop_rops;
> +
> + if (!of_property_read_u32(np, "anatop-enable-bit",
> + &enable_bit)) {
> + anatop_rops.enable = regulator_enable_regmap;
> + anatop_rops.disable = regulator_disable_regmap;
> + anatop_rops.is_enabled = regulator_is_enabled_regmap;
> +
> + rdesc->enable_reg = sreg->control_reg;
> + rdesc->enable_mask = BIT(enable_bit);
> + }
> + }
> +
> + return of_regulator_register(rdev, dev->device_node);
> +}
> +
> +static const struct of_device_id of_anatop_regulator_match_tbl[] = {
> + { .compatible = "fsl,anatop-regulator", },
> + { /* end */ }
> +};
> +
> +static struct driver_d anatop_regulator_driver = {
> + .name = "anatop_regulator",
> + .probe = anatop_regulator_probe,
> + .of_compatible = DRV_OF_COMPAT(of_anatop_regulator_match_tbl),
> +};
> +device_platform_driver(anatop_regulator_driver);
> +
> --
> 2.20.1
>
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
