Everyone:
This seires is a build-up on previously submitted PCI sync set [1] and
contains the patches I created while working on adding support for
PCIe on i.MX7. The series consists of following:
- Patches adding necessary regulator pluming to support porint ANATOP
driver
- ANATOP driver port
- Port of basic power domain infrastructure from Linux kernel needed
for controlling GPCv2 (useful for both i.MX7 and, especially, for
i.MX8MQ)
- Port of GPCv2 driver from Linux as well as of some bug fixes for it
- Port of i.MX7 reset controller driver
- Patches adding support for i.MX7 to existing i.MX6 PCIe host
controller driver
- Misc fixes
This series has been tested on i.MX7D SabreSD board against Toshiba
NVMe device.
Feedback is welcome!
Changes since [v1]:
- Patches containing bugfixes for GPCv2 were squashed into the patch
introducing the driver
- Patches containing bugfixes for i.MX7 reset controller were
squashed into the patch introducing the driver
- Deffered probe by GPIO support in i.MX6 PCI driver fixed by having
GPIO request preceed the call to dev_request_mem_resource()
Thanks,
Andrey Smirnov
[1] http://lists.infradead.org/pipermail/barebox/2018-December/036005.html
[v1] http://lists.infradead.org/pipermail/barebox/2019-January/036318.html
Andrey Smirnov (18):
regulator: Convert drivers to use struct regulator_desc
regulator: Port basic regmap regulator functions
regulator: Add support for setting regulator's voltage
base: driver: Drop redundant list_empty() check
base: Port driver_deferred_probe_check_state() from Linux
regulator: Add primitive support for deferred probe
regulator: Port ANATOP driver from Linux
drivers: base: Port power management code from Linux
soc: imx: Add GPCv2 power gating driver
reset: Add i.MX7 SRC reset driver
reset: Mark local functions as static
PCI: imx6: Add code to support i.MX7D
PCI: imx6: Allow probe deferral by reset GPIO
PCI: imx6: Do not wait for speed change on i.MX7
PCI: imx6: Do not switch speed if Gen2 is disabled
PCI: imx6: Fix spelling mistake: "contol" -> "control"
PCI: imx6: Drop unnecessary root_bus_nr setting
PCI: imx6: Port imx6_pcie_ltssm_enable()
arch/arm/mach-imx/Kconfig | 1 +
drivers/Kconfig | 2 +
drivers/Makefile | 1 +
drivers/base/Kconfig | 3 +
drivers/base/Makefile | 4 +-
drivers/base/driver.c | 68 ++++--
drivers/base/platform.c | 7 +
drivers/base/power.c | 245 +++++++++++++++++++++
drivers/pci/Kconfig | 4 +-
drivers/pci/pci-imx6.c | 255 +++++++++++++++-------
drivers/regulator/Kconfig | 8 +
drivers/regulator/Makefile | 5 +-
drivers/regulator/anatop-regulator.c | 161 ++++++++++++++
drivers/regulator/bcm2835.c | 6 +-
drivers/regulator/core.c | 60 ++++-
drivers/regulator/fixed.c | 6 +-
drivers/regulator/helpers.c | 186 ++++++++++++++++
drivers/reset/Kconfig | 11 +
drivers/reset/Makefile | 1 +
drivers/reset/core.c | 8 +-
drivers/reset/reset-imx7.c | 151 +++++++++++++
drivers/soc/imx/Kconfig | 9 +
drivers/soc/imx/Makefile | 1 +
drivers/soc/imx/gpcv2.c | 315 +++++++++++++++++++++++++++
include/driver.h | 2 +
include/pm_domain.h | 82 +++++++
include/regulator.h | 41 +++-
27 files changed, 1529 insertions(+), 114 deletions(-)
create mode 100644 drivers/base/Kconfig
create mode 100644 drivers/base/power.c
create mode 100644 drivers/regulator/anatop-regulator.c
create mode 100644 drivers/regulator/helpers.c
create mode 100644 drivers/reset/reset-imx7.c
create mode 100644 drivers/soc/imx/Kconfig
create mode 100644 drivers/soc/imx/Makefile
create mode 100644 drivers/soc/imx/gpcv2.c
create mode 100644 include/pm_domain.h
--
2.20.1
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
