Signed-off-by: Antony Pavlov <antonynpavlov@xxxxxxxxx> --- Documentation/boards/riscv.rst | 91 ++++++++++++++++++++++++++++++++++ 1 file changed, 91 insertions(+) diff --git a/Documentation/boards/riscv.rst b/Documentation/boards/riscv.rst new file mode 100644 index 0000000000..c7fa52aadb --- /dev/null +++ b/Documentation/boards/riscv.rst @@ -0,0 +1,91 @@ +RISC-V +====== + +Running RISC-V barebox on qemu +------------------------------ + +Obtain RISC-V GCC/Newlib Toolchain, +see https://github.com/riscv/riscv-tools/blob/master/README.md +for details. The ``build.sh`` script from ``riscv-tools`` should +create toolchain. + +Next compile qemu emulator:: + + $ git clone -b 20180409.erizo https://github.com/miet-riscv-workgroup/riscv-qemu + $ cd riscv-qemu + $ cap="no" ./configure \ + --extra-cflags="-Wno-maybe-uninitialized" \ + --audio-drv-list="" \ + --disable-attr \ + --disable-blobs \ + --disable-bluez \ + --disable-brlapi \ + --disable-curl \ + --disable-curses \ + --disable-docs \ + --disable-kvm \ + --disable-spice \ + --disable-sdl \ + --disable-vde \ + --disable-vnc-sasl \ + --disable-werror \ + --enable-trace-backend=simple \ + --disable-stack-protector \ + --target-list=riscv32-softmmu,riscv64-softmmu + $ make + + +Next compile barebox:: + + $ make erizo_generic_defconfig ARCH=riscv + ... + $ make ARCH=riscv CROSS_COMPILE=<path to your riscv toolchain>/riscv32-unknown-elf- + +Run barebox:: + + $ <path to riscv-qemu source>/riscv32-softmmu/qemu-system-riscv32 \ + -nographic -M erizo -bios <path to barebox sources >/barebox.bin \ + -serial stdio -monitor none -trace file=/dev/null + Switch to console [cs0] + + + barebox 2018.12.0-00148-g60e49c4e16 #1 Tue Dec 18 01:12:29 MSK 2018 + + + Board: generic Erizo SoC board + malloc space: 0x80100000 -> 0x801fffff (size 1 MiB) + running /env/bin/init... + /env/bin/init not found + barebox:/ + + +Running RISC-V barebox on DE0-Nano FPGA board +--------------------------------------------- + +See https://github.com/open-design/riscv-soc-cores/ for instructions +on DE0-Nano bitstream generation and loading. + +Connect to board's UART with your favorite serial communication software +(e.g. minicom) and check 'nmon> ' prompt (nmon runs from onchip ROM). + +Next close your communication software and use ./scripts/nmon-loader +to load barebox image into board's DRAM, e.g. + + # ./scripts/nmon-loader barebox.erizo.nmon /dev/ttyUSB0 115200 + +Wait several munutes for 'nmon> ' prompt. + +Next, start barebox from DRAM: + + nmon> g 80000000 + Switch to console [cs0] + + + barebox 2018.12.0-00148-g60e49c4e16 #1 Tue Dec 18 01:12:29 MSK 2018 + + + Board: generic Erizo SoC board + malloc space: 0x80100000 -> 0x801fffff (size 1 MiB) + running /env/bin/init... + /env/bin/init not found + barebox:/ -- 2.20.0 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
