Port of a Linux commit a782b5f986c3fa1cfa7f2b57941200c6a5809242
Previously we checked for iATU unroll support by reading PCIE_ATU_VIEWPORT
even on platforms, e.g., Keystone, that do not have ATU ports. This can
cause bad behavior such as asynchronous external aborts:
OF: PCI: MEM 0x60000000..0x6fffffff -> 0x60000000
Unhandled fault: asynchronous external abort (0x1211) at 0x00000000
pgd = c0003000
[00000000] *pgd=80000800004003, *pmd=00000000
Internal error: : 1211 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.9.0-00009-g6ff59d2-dirty #7
Hardware name: Keystone
task: eb878000 task.stack: eb866000
PC is at dw_pcie_setup_rc+0x24/0x380
LR is at ks_pcie_host_init+0x10/0x170
Move the dw_pcie_iatu_unroll_enabled() check so we only call it on
platforms that do not use the ATU. These platforms supply their own
->rd_other_conf() and ->wr_other_conf() methods.
[bhelgaas: changelog]
Fixes: a0601a470537 ("PCI: designware: Add iATU Unroll feature")
Fixes: 416379f9ebde ("PCI: designware: Check for iATU unroll support after initializing host")
Tested-by: Kishon Vijay Abraham I <kishon@xxxxxx>
Signed-off-by: Murali Karicheri <m-karicheri2@xxxxxx>
Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
Acked-By: Joao Pinto <jpinto@xxxxxxxxxxxx>
CC: stable@xxxxxxxxxxxxxxx # v4.9+
Signed-off-by: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
---
drivers/pci/pcie-designware.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/pci/pcie-designware.c b/drivers/pci/pcie-designware.c
index 2b39e39e0..d42045088 100644
--- a/drivers/pci/pcie-designware.c
+++ b/drivers/pci/pcie-designware.c
@@ -582,11 +582,6 @@ void dw_pcie_setup_rc(struct pcie_port *pp)
{
u32 val;
- /* get iATU unroll support */
- pp->iatu_unroll_enabled = dw_pcie_iatu_unroll_enabled(pp);
- dev_dbg(pp->dev, "iATU unroll: %s\n",
- pp->iatu_unroll_enabled ? "enabled" : "disabled");
-
/* set the number of lanes */
val = dw_pcie_readl_rc(pp, PCIE_PORT_LINK_CONTROL);
val &= ~PORT_LINK_MODE_MASK;
@@ -645,6 +640,11 @@ void dw_pcie_setup_rc(struct pcie_port *pp)
* we should not program the ATU here.
*/
if (!pp->ops->rd_other_conf) {
+ /* get iATU unroll support */
+ pp->iatu_unroll_enabled = dw_pcie_iatu_unroll_enabled(pp);
+ dev_dbg(pp->dev, "iATU unroll: %s\n",
+ pp->iatu_unroll_enabled ? "enabled" : "disabled");
+
dw_pcie_prog_outbound_atu(pp, PCIE_ATU_REGION_INDEX0,
PCIE_ATU_TYPE_MEM, pp->mem_mod_base,
pp->mem_bus_addr, pp->mem_size);
--
2.19.1
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
