Port of a Linux commit a509d7d9af5ebf86ffbefa98e49761d813fb1d40 Previously dbi accessors can be used to access data of size 4 bytes. But there might be situations (like accessing MSI_MESSAGE_CONTROL in order to set/get the number of required MSI interrupts in EP mode) where dbi accessors must be used to access data of size 2. This is in preparation for adding endpoint mode support to designware driver. Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx> Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx> Acked-by: Niklas Cassel <niklas.cassel@xxxxxxxx> Cc: Jingoo Han <jingoohan1@xxxxxxxxx> Cc: Joao Pinto <Joao.Pinto@xxxxxxxxxxxx> Signed-off-by: Andrey Smirnov <andrew.smirnov@xxxxxxxxx> --- drivers/pci/pcie-designware.c | 30 ++++++++++++++++++++++-------- drivers/pci/pcie-designware.h | 15 +++++++++------ 2 files changed, 31 insertions(+), 14 deletions(-) diff --git a/drivers/pci/pcie-designware.c b/drivers/pci/pcie-designware.c index 2d8bbd32a..2baf6c3b1 100644 --- a/drivers/pci/pcie-designware.c +++ b/drivers/pci/pcie-designware.c @@ -68,21 +68,35 @@ int dw_pcie_write(void __iomem *addr, int size, u32 val) return PCIBIOS_SUCCESSFUL; } -u32 __dw_pcie_readl_dbi(struct dw_pcie *pci, void __iomem *base, u32 reg) +u32 __dw_pcie_readl_dbi(struct dw_pcie *pci, void __iomem *base, u32 reg, + size_t size) { + int ret; + u32 val; + if (pci->ops->readl_dbi) - return pci->ops->readl_dbi(pci, base, reg); + return pci->ops->readl_dbi(pci, base, reg, size); - return readl(base + reg); + ret = dw_pcie_read(base + reg, size, &val); + if (ret) + dev_err(pci->dev, "read DBI address failed\n"); + + return val; } void __dw_pcie_writel_dbi(struct dw_pcie *pci, void __iomem *base, u32 reg, - u32 val) + size_t size, u32 val) { - if (pci->ops->writel_dbi) - pci->ops->writel_dbi(pci, base, reg, val); - else - writel(val, base + reg); + int ret; + + if (pci->ops->writel_dbi) { + pci->ops->writel_dbi(pci, base, reg, size, val); + return; + } + + ret = dw_pcie_write(base + reg, size, val); + if (ret) + dev_err(pci->dev, "write DBI address failed\n"); } void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index, diff --git a/drivers/pci/pcie-designware.h b/drivers/pci/pcie-designware.h index 3839263e9..02e451756 100644 --- a/drivers/pci/pcie-designware.h +++ b/drivers/pci/pcie-designware.h @@ -113,9 +113,10 @@ struct pcie_port { }; struct dw_pcie_ops { - u32 (*readl_dbi)(struct dw_pcie *pcie, void __iomem *base, u32 reg); + u32 (*readl_dbi)(struct dw_pcie *pcie, void __iomem *base, u32 reg, + size_t size); void (*writel_dbi)(struct dw_pcie *pcie, void __iomem *base, u32 reg, - u32 val); + size_t size, u32 val); int (*link_up)(struct dw_pcie *pcie); }; @@ -134,8 +135,10 @@ int dw_pcie_write(void __iomem *addr, int size, u32 val); void dw_pcie_setup_rc(struct pcie_port *pp); int dw_pcie_host_init(struct pcie_port *pp); -u32 __dw_pcie_readl_dbi(struct dw_pcie *pci, void __iomem *addr, u32 reg); -void __dw_pcie_writel_dbi(struct dw_pcie *pci, void __iomem *addr, u32 reg, u32 val); +u32 __dw_pcie_readl_dbi(struct dw_pcie *pci, void __iomem *addr, u32 reg, + size_t size); +void __dw_pcie_writel_dbi(struct dw_pcie *pci, void __iomem *addr, u32 reg, + size_t size, u32 val); int dw_pcie_link_up(struct dw_pcie *pci); int dw_pcie_wait_for_link(struct dw_pcie *pci); void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index, @@ -145,11 +148,11 @@ void dw_pcie_setup(struct dw_pcie *pci); static inline void dw_pcie_writel_dbi(struct dw_pcie *pci, u32 reg, u32 val) { - __dw_pcie_writel_dbi(pci, pci->dbi_base, reg, val); + __dw_pcie_writel_dbi(pci, pci->dbi_base, reg, 0x4, val); } static inline u32 dw_pcie_readl_dbi(struct dw_pcie *pci, u32 reg) { - return __dw_pcie_readl_dbi(pci, pci->dbi_base, reg); + return __dw_pcie_readl_dbi(pci, pci->dbi_base, reg, 0x4); } #endif /* _PCIE_DESIGNWARE_H */ -- 2.19.1 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox