On Wed, Dec 05, 2018 at 04:40:35PM +0100, Stefan Riedmueller wrote:
> The phyBOARD-Segin baseboard of the phyCORE-i.MX 6UL features a USB
> type A connector on the second USB OTG port of the i.MX 6UL. So enable this
> port as a host port.
>
> Signed-off-by: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
> ---
> arch/arm/dts/imx6ul-phytec-phycore-som.dts | 4 ++++
> arch/arm/dts/imx6ul-phytec-phycore-som.dtsi | 6 ++++++
> 2 files changed, 10 insertions(+)
Applied, thanks
Sascha
>
> diff --git a/arch/arm/dts/imx6ul-phytec-phycore-som.dts b/arch/arm/dts/imx6ul-phytec-phycore-som.dts
> index 73f7dbe9a6b3..509424347082 100644
> --- a/arch/arm/dts/imx6ul-phytec-phycore-som.dts
> +++ b/arch/arm/dts/imx6ul-phytec-phycore-som.dts
> @@ -39,3 +39,7 @@
> &usdhc1 {
> status = "okay";
> };
> +
> +&usbotg2 {
> + status = "okay";
> +};
> diff --git a/arch/arm/dts/imx6ul-phytec-phycore-som.dtsi b/arch/arm/dts/imx6ul-phytec-phycore-som.dtsi
> index 2504c9729dd1..05bf18d6f1b2 100644
> --- a/arch/arm/dts/imx6ul-phytec-phycore-som.dtsi
> +++ b/arch/arm/dts/imx6ul-phytec-phycore-som.dtsi
> @@ -89,6 +89,12 @@
> status = "disabled";
> };
>
> +&usbotg2 {
> + dr_mode = "host";
> + disable-over-current;
> + status = "disabled";
> +};
> +
> &usdhc1 {
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_usdhc1>;
> --
> 2.7.4
>
>
> _______________________________________________
> barebox mailing list
> barebox@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
