Hi all, I'm trying to communicate with a TPM 2.0 (infineon,slb9670) over SPI on a Raspberry Pi 3 in barebox. CONFIG_SPI=y CONFIG_DRIVER_SPI_GPIO=y CONFIG_CMD_SPI=y are set in the barebox configuration and dtparam=spi=on is set in the /boot/config.txt on the raspberry pi. But when checking /dev/ on barebox, there is nothing related to spi except cs0. I would have expected something similiar to /dev/spidev0.0 showing up. Did I miss any configurations? Best Regrds, Kai Che _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
