From: Jan Remmet <j.remmet@xxxxxxxxx>
As PHY address 0 is not used on PHYTEC i.MX 6 and i.MX 6UL SOMs we do
not have to override the B-CAST_OFF strap-in which disables broadcast
on PHY address 0.
Also add some comments about the magic values.
Signed-off-by: Jan Remmet <j.remmet@xxxxxxxxx>
Signed-off-by: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
---
arch/arm/boards/phytec-som-imx6/board.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boards/phytec-som-imx6/board.c b/arch/arm/boards/phytec-som-imx6/board.c
index 4079bc9de1b3..38a2ef641e47 100644
--- a/arch/arm/boards/phytec-som-imx6/board.c
+++ b/arch/arm/boards/phytec-som-imx6/board.c
@@ -99,8 +99,17 @@ static unsigned int get_module_rev(void)
static int ksz8081_phy_fixup(struct phy_device *phydev)
{
+ /*
+ * 0x8100 default
+ * 0x0080 RMII 50 MHz clock mode
+ * 0x0010 LED Mode 1
+ */
phy_write(phydev, 0x1f, 0x8190);
- phy_write(phydev, 0x16, 0x202);
+ /*
+ * 0x0002 Override strap-in for RMII mode
+ * This should be default but after reset we occasionally read 0x0001
+ */
+ phy_write(phydev, 0x16, 0x2);
return 0;
}
--
2.7.4
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
