On Tue, Nov 20, 2018 at 8:04 AM Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> wrote: > > The max_load_size option makes sure that only the portion of the image > is loaded to SRAM that fits into it. > > Note this does not cover the whole available SRAM area for all boards, > for the bigger SRAM areas only a part is chosen that is enough to fit > the initial loader in. > > Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> > --- > arch/arm/boards/cm-fx6/flash-header-mx6-cm-fx6.imxcfg | 1 + > arch/arm/boards/nxp-imx8mq-evk/flash-header-imx8mq-evk.imxcfg | 1 + > .../flash-header-technexion-wandboard.imxcfg | 1 + > arch/arm/boards/zii-imx6q-rdu2/flash-header-rdu2.imxcfg | 1 + > 4 files changed, 4 insertions(+) > > diff --git a/arch/arm/boards/cm-fx6/flash-header-mx6-cm-fx6.imxcfg b/arch/arm/boards/cm-fx6/flash-header-mx6-cm-fx6.imxcfg > index 400a870154..9e8dce5877 100644 > --- a/arch/arm/boards/cm-fx6/flash-header-mx6-cm-fx6.imxcfg > +++ b/arch/arm/boards/cm-fx6/flash-header-mx6-cm-fx6.imxcfg > @@ -1,3 +1,4 @@ > soc imx6 > loadaddr 0x00907000 > +max_load_size 0x11000 > dcdofs 0x400 > diff --git a/arch/arm/boards/nxp-imx8mq-evk/flash-header-imx8mq-evk.imxcfg b/arch/arm/boards/nxp-imx8mq-evk/flash-header-imx8mq-evk.imxcfg > index a12c28fceb..14e4a595a0 100644 > --- a/arch/arm/boards/nxp-imx8mq-evk/flash-header-imx8mq-evk.imxcfg > +++ b/arch/arm/boards/nxp-imx8mq-evk/flash-header-imx8mq-evk.imxcfg > @@ -1,4 +1,5 @@ > soc imx8mq > > loadaddr 0x007E1000 > +max_load_size 0x10000 > dcdofs 0x400 > diff --git a/arch/arm/boards/technexion-wandboard/flash-header-technexion-wandboard.imxcfg b/arch/arm/boards/technexion-wandboard/flash-header-technexion-wandboard.imxcfg > index 33621117d4..68cb08e200 100644 > --- a/arch/arm/boards/technexion-wandboard/flash-header-technexion-wandboard.imxcfg > +++ b/arch/arm/boards/technexion-wandboard/flash-header-technexion-wandboard.imxcfg > @@ -1,3 +1,4 @@ > loadaddr 0x00907000 > soc imx6 > +max_load_size 0x11000 > dcdofs 0x400 > diff --git a/arch/arm/boards/zii-imx6q-rdu2/flash-header-rdu2.imxcfg b/arch/arm/boards/zii-imx6q-rdu2/flash-header-rdu2.imxcfg > index 400a870154..9e8dce5877 100644 > --- a/arch/arm/boards/zii-imx6q-rdu2/flash-header-rdu2.imxcfg > +++ b/arch/arm/boards/zii-imx6q-rdu2/flash-header-rdu2.imxcfg > @@ -1,3 +1,4 @@ > soc imx6 > loadaddr 0x00907000 > +max_load_size 0x11000 Sascha: The change above bricks Barebox on RDU2 because load size of 0x11000 isn't enough. Tracing what hdr->boot_data.size was set to prior to this series ends up with 0x1d000 as a number, using which appears to fix the problem on the real board, so we probably should max_load_size to at least that much. I am hoping you can fix it on your end, but let me know if you need me to generate a fixup patch. Thanks, Andrey Smirnov _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
