Add support for the Xilinx Zynq Ultrascale+ MPSoC architecture (ZynqMP)
and the Xilinx ZCU104 board.
Barebox is booted as BL33 in EL-1 and expects that a BL2 (i.e. the FSBL)
already took care of initializing the RAM. Also for debug_ll, the UART
is expected to be already setup correctly. Thus, you have to add the
Barebox binary to a boot image as described in "Chapter 11: Boot and
Configuration" of "Zynq Ultrascale+ Device Technical Reference Manual".
Signed-off-by: Michael Tretter <m.tretter@xxxxxxxxxxxxxx>
---
Changelog:
v2:
- introduce ENTRY_PROC in a separate patch
- move ENTRY_PROC to a separate header file
- switch to piggydata for assembling the image
- remove zynqmp.c and board.c and the respective empty init calls
- use SPDX-License-Identifiers
---
arch/arm/Kconfig | 14 +++++++
arch/arm/Makefile | 1 +
arch/arm/boards/Makefile | 1 +
arch/arm/boards/xilinx-zcu104/Makefile | 1 +
arch/arm/boards/xilinx-zcu104/lowlevel.c | 21 ++++++++++
arch/arm/boards/xilinx-zcu104/lowlevel_init.S | 11 ++++++
arch/arm/configs/zynqmp_defconfig | 38 +++++++++++++++++++
arch/arm/dts/Makefile | 1 +
arch/arm/dts/zynqmp-zcu104-revA.dts | 10 +++++
arch/arm/mach-zynqmp/Kconfig | 9 +++++
arch/arm/mach-zynqmp/Makefile | 1 +
arch/arm/mach-zynqmp/include/mach/debug_ll.h | 30 +++++++++++++++
images/Makefile | 1 +
images/Makefile.zynqmp | 7 ++++
14 files changed, 146 insertions(+)
create mode 100644 arch/arm/boards/xilinx-zcu104/Makefile
create mode 100644 arch/arm/boards/xilinx-zcu104/lowlevel.c
create mode 100644 arch/arm/boards/xilinx-zcu104/lowlevel_init.S
create mode 100644 arch/arm/configs/zynqmp_defconfig
create mode 100644 arch/arm/dts/zynqmp-zcu104-revA.dts
create mode 100644 arch/arm/mach-zynqmp/Kconfig
create mode 100644 arch/arm/mach-zynqmp/Makefile
create mode 100644 arch/arm/mach-zynqmp/include/mach/debug_ll.h
create mode 100644 images/Makefile.zynqmp
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 3b486f7b8b..842cbb1485 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -245,6 +245,19 @@ config ARCH_ZYNQ
bool "Xilinx Zynq-based boards"
select HAS_DEBUG_LL
+config ARCH_ZYNQMP
+ bool "Xilinx ZynqMP-based boards"
+ select CPU_V8
+ select HAS_DEBUG_LL
+ select HAVE_PBL_MULTI_IMAGES
+ select COMMON_CLK
+ select COMMON_CLK_OF_PROVIDER
+ select CLKDEV_LOOKUP
+ select OFDEVICE
+ select OFTREE
+ select RELOCATABLE
+ select SYS_SUPPORTS_64BIT_KERNEL
+
config ARCH_QEMU
bool "ARM QEMU boards"
select HAS_DEBUG_LL
@@ -275,6 +288,7 @@ source arch/arm/mach-tegra/Kconfig
source arch/arm/mach-uemd/Kconfig
source arch/arm/mach-zynq/Kconfig
source arch/arm/mach-qemu/Kconfig
+source arch/arm/mach-zynqmp/Kconfig
config ARM_ASM_UNIFIED
bool
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 50958b787f..675d3433cc 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -101,6 +101,7 @@ machine-$(CONFIG_ARCH_VEXPRESS) := vexpress
machine-$(CONFIG_ARCH_TEGRA) := tegra
machine-$(CONFIG_ARCH_UEMD) := uemd
machine-$(CONFIG_ARCH_ZYNQ) := zynq
+machine-$(CONFIG_ARCH_ZYNQMP) := zynqmp
machine-$(CONFIG_ARCH_QEMU) := qemu
diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile
index 3bf176b14d..a15a24c02e 100644
--- a/arch/arm/boards/Makefile
+++ b/arch/arm/boards/Makefile
@@ -153,6 +153,7 @@ obj-$(CONFIG_MACH_VSCOM_BALTOS) += vscom-baltos/
obj-$(CONFIG_MACH_QEMU_VIRT64) += qemu-virt64/
obj-$(CONFIG_MACH_WARP7) += element14-warp7/
obj-$(CONFIG_MACH_VF610_TWR) += freescale-vf610-twr/
+obj-$(CONFIG_MACH_XILINX_ZCU104) += xilinx-zcu104/
obj-$(CONFIG_MACH_ZII_RDU1) += zii-imx51-rdu1/
obj-$(CONFIG_MACH_ZII_RDU2) += zii-imx6q-rdu2/
obj-$(CONFIG_MACH_ZII_VF610_DEV) += zii-vf610-dev/
diff --git a/arch/arm/boards/xilinx-zcu104/Makefile b/arch/arm/boards/xilinx-zcu104/Makefile
new file mode 100644
index 0000000000..ca9c44c1a5
--- /dev/null
+++ b/arch/arm/boards/xilinx-zcu104/Makefile
@@ -0,0 +1 @@
+lwl-y += lowlevel.o lowlevel_init.o
diff --git a/arch/arm/boards/xilinx-zcu104/lowlevel.c b/arch/arm/boards/xilinx-zcu104/lowlevel.c
new file mode 100644
index 0000000000..5541f9bc8e
--- /dev/null
+++ b/arch/arm/boards/xilinx-zcu104/lowlevel.c
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Pengutronix, Michael Tretter <m.tretter@xxxxxxxxxxxxxx>
+ */
+
+#include <common.h>
+#include <debug_ll.h>
+#include <asm/barebox-arm.h>
+
+extern char __dtb_zynqmp_zcu104_revA_start[];
+
+void zynqmp_zcu104_start(uint32_t, uint32_t, uint32_t);
+
+void noinline zynqmp_zcu104_start(uint32_t r0, uint32_t r1, uint32_t r2)
+{
+ /* Assume that the first stage boot loader configured the UART */
+ putc_ll('>');
+
+ barebox_arm_entry(0, SZ_2G,
+ __dtb_zynqmp_zcu104_revA_start + global_variable_offset());
+}
diff --git a/arch/arm/boards/xilinx-zcu104/lowlevel_init.S b/arch/arm/boards/xilinx-zcu104/lowlevel_init.S
new file mode 100644
index 0000000000..9905a5f867
--- /dev/null
+++ b/arch/arm/boards/xilinx-zcu104/lowlevel_init.S
@@ -0,0 +1,11 @@
+#include <linux/linkage.h>
+#include <asm/barebox-arm64.h>
+
+/* The DRAM is already setup */
+#define STACK_TOP 0x80000000
+
+ENTRY_PROC(start_zynqmp_zcu104)
+ mov x0, #STACK_TOP
+ mov sp, x0
+ b zynqmp_zcu104_start
+ENTRY_PROC_END(start_zynqmp_zcu104)
diff --git a/arch/arm/configs/zynqmp_defconfig b/arch/arm/configs/zynqmp_defconfig
new file mode 100644
index 0000000000..4dea9647fe
--- /dev/null
+++ b/arch/arm/configs/zynqmp_defconfig
@@ -0,0 +1,38 @@
+CONFIG_ARCH_ZYNQMP=y
+CONFIG_MACH_XILINX_ZCU104=y
+CONFIG_MMU=y
+CONFIG_MALLOC_SIZE=0x0
+CONFIG_MALLOC_TLSF=y
+CONFIG_KALLSYMS=y
+CONFIG_HUSH_FANCY_PROMPT=y
+CONFIG_CMDLINE_EDITING=y
+CONFIG_AUTO_COMPLETE=y
+CONFIG_MENU=y
+CONFIG_BOOTM_SHOW_TYPE=y
+CONFIG_BOOTM_VERBOSE=y
+CONFIG_BOOTM_INITRD=y
+CONFIG_BOOTM_OFTREE=y
+CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
+CONFIG_LONGHELP=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_GO=y
+CONFIG_CMD_RESET=y
+CONFIG_CMD_PARTITION=y
+CONFIG_CMD_EXPORT=y
+CONFIG_CMD_PRINTENV=y
+CONFIG_CMD_MAGICVAR=y
+CONFIG_CMD_MAGICVAR_HELP=y
+CONFIG_CMD_SAVEENV=y
+CONFIG_CMD_LN=y
+CONFIG_CMD_SLEEP=y
+CONFIG_CMD_EDIT=y
+CONFIG_CMD_MENU=y
+CONFIG_CMD_MENU_MANAGEMENT=y
+CONFIG_CMD_READLINE=y
+CONFIG_CMD_TIMEOUT=y
+CONFIG_CMD_CLK=y
+CONFIG_CMD_OFTREE=y
+CONFIG_CMD_TIME=y
+CONFIG_DRIVER_SERIAL_CADENCE=y
+# CONFIG_SPI is not set
+CONFIG_DIGEST=y
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 503d9b18f9..0ac3124c8c 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -119,6 +119,7 @@ pbl-dtb-$(CONFIG_MACH_ZII_VF610_DEV) += \
pbl-dtb-$(CONFIG_MACH_AT91SAM9263EK_DT) += at91sam9263ek.dtb.o
pbl-dtb-$(CONFIG_MACH_MICROCHIP_KSZ9477_EVB) += at91-microchip-ksz9477-evb.dtb.o
pbl-dtb-$(CONFIG_MACH_AT91SAM9X5EK) += at91sam9x5ek.dtb.o
+pbl-dtb-$(CONFIG_MACH_XILINX_ZCU104) += zynqmp-zcu104-revA.dtb.o
pbl-dtb-$(CONFIG_MACH_ZII_IMX7D_RPU2) += imx7d-zii-rpu2.dtb.o
diff --git a/arch/arm/dts/zynqmp-zcu104-revA.dts b/arch/arm/dts/zynqmp-zcu104-revA.dts
new file mode 100644
index 0000000000..8c467ee970
--- /dev/null
+++ b/arch/arm/dts/zynqmp-zcu104-revA.dts
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP ZCU104
+ *
+ * (C) Copyright 2017 - 2018, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xxxxxxxxxx>
+ */
+
+#include <arm64/xilinx/zynqmp-zcu104-revA.dts>
diff --git a/arch/arm/mach-zynqmp/Kconfig b/arch/arm/mach-zynqmp/Kconfig
new file mode 100644
index 0000000000..1c7727d66c
--- /dev/null
+++ b/arch/arm/mach-zynqmp/Kconfig
@@ -0,0 +1,9 @@
+if ARCH_ZYNQMP
+
+config MACH_XILINX_ZCU104
+ bool "Xilinx Zynq UltraScale+ MPSoC ZCU104"
+ help
+ Say Y here if you are using the Xilinx Zynq UltraScale+ MPSoC ZCU104
+ evaluation board.
+
+endif
diff --git a/arch/arm/mach-zynqmp/Makefile b/arch/arm/mach-zynqmp/Makefile
new file mode 100644
index 0000000000..16a218658a
--- /dev/null
+++ b/arch/arm/mach-zynqmp/Makefile
@@ -0,0 +1 @@
+obj- := __dummy__.o
diff --git a/arch/arm/mach-zynqmp/include/mach/debug_ll.h b/arch/arm/mach-zynqmp/include/mach/debug_ll.h
new file mode 100644
index 0000000000..cd2583a35b
--- /dev/null
+++ b/arch/arm/mach-zynqmp/include/mach/debug_ll.h
@@ -0,0 +1,30 @@
+#ifndef __MACH_DEBUG_LL_H__
+#define __MACH_DEBUG_LL_H__
+
+#include <io.h>
+
+#define ZYNQMP_UART0_BASE 0xFF000000
+#define ZYNQMP_UART1_BASE 0xFF010000
+#define ZYNQMP_UART_BASE ZYNQMP_UART0_BASE
+#define ZYNQMP_DEBUG_LL_UART_BASE ZYNQMP_UART_BASE
+
+#define ZYNQMP_UART_RXTXFIFO 0x30
+#define ZYNQMP_UART_CHANNEL_STS 0x2C
+
+#define ZYNQMP_UART_STS_TFUL (1 << 4)
+#define ZYNQMP_UART_TXDIS (1 << 5)
+
+static inline void PUTC_LL(int c)
+{
+ void __iomem *base = (void __iomem *)ZYNQMP_DEBUG_LL_UART_BASE;
+
+ if (readl(base) & ZYNQMP_UART_TXDIS)
+ return;
+
+ while ((readl(base + ZYNQMP_UART_CHANNEL_STS) & ZYNQMP_UART_STS_TFUL) != 0)
+ ;
+
+ writel(c, base + 0x30);
+}
+
+#endif
diff --git a/images/Makefile b/images/Makefile
index 4c6d486f08..9aaf8af6ed 100644
--- a/images/Makefile
+++ b/images/Makefile
@@ -104,6 +104,7 @@ include $(srctree)/images/Makefile.socfpga
include $(srctree)/images/Makefile.tegra
include $(srctree)/images/Makefile.vexpress
include $(srctree)/images/Makefile.at91
+include $(srctree)/images/Makefile.zynqmp
targets += $(image-y) pbl.lds barebox.x barebox.z
targets += $(patsubst %,%.pblb,$(pblb-y))
diff --git a/images/Makefile.zynqmp b/images/Makefile.zynqmp
new file mode 100644
index 0000000000..b157eed512
--- /dev/null
+++ b/images/Makefile.zynqmp
@@ -0,0 +1,7 @@
+#
+# barebox image generation Makefile for Xilinx Zynq UltraScale+
+#
+
+pblx-$(CONFIG_MACH_XILINX_ZCU104) += start_zynqmp_zcu104
+FILE_barebox-zynqmp-zcu104.img = start_zynqmp_zcu104.pblb
+image-$(CONFIG_MACH_XILINX_ZCU104) += barebox-zynqmp-zcu104.img
--
2.19.1
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
