Re: [PATCH 3/3] ARM: zynqmp: add support for Xilinx ZCU104 board

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Am 23.11.18 um 19:27 schrieb Michael Tretter:
> On Fri, 23 Nov 2018 16:08:18 +0100, Oleksij Rempel wrote:
>> Hi Michael,
>>
>> Am 23.11.18 um 14:35 schrieb Michael Tretter:
>>> Add support for the Xilinx Zynq Ultrascale+ MPSoC architecture (ZynqMP)
>>> and the Xilinx ZCU104 board.
>>>
>>> Barebox is booted as BL33 in EL-1 and expects that a BL2 (i.e. the FSBL)
>>> already took care of initializing the RAM. Also for debug_ll, the UART
>>> is expected to be already setup correctly.
>>>
>>> Thus, you have to add the Barebox binary to a boot image as described in
>>> "Chapter 11: Boot and Configuration" of "Zynq Ultrascale+ Device
>>> Technical Reference Manual".
>>>
>>> The ENTRY_FUNCTION macro cannot be used in aarch64, because aarch64 does
>>> not specify the __naked__ attribute and gcc add a function prologue to
>>> the entry function which writes to the stack, but the stack is not set
>>> up. Thus, the entry has to be implemented in assembly.
>>>
>>> Signed-off-by: Michael Tretter <m.tretter@xxxxxxxxxxxxxx>
>>> ---
>>>  arch/arm/Kconfig                              | 14 +++++++
>>>  arch/arm/Makefile                             |  1 +
>>>  arch/arm/boards/Makefile                      |  1 +
>>>  arch/arm/boards/xilinx-zcu104/Makefile        |  2 +
>>>  arch/arm/boards/xilinx-zcu104/board.c         | 25 ++++++++++++
>>>  arch/arm/boards/xilinx-zcu104/lowlevel.c      | 30 +++++++++++++++
>>>  arch/arm/boards/xilinx-zcu104/lowlevel_init.S | 32 ++++++++++++++++
>>>  arch/arm/configs/zynqmp_defconfig             | 38 +++++++++++++++++++
>>>  arch/arm/dts/Makefile                         |  1 +
>>>  arch/arm/mach-zynqmp/Kconfig                  |  9 +++++
>>>  arch/arm/mach-zynqmp/Makefile                 |  1 +
>>>  arch/arm/mach-zynqmp/include/mach/debug_ll.h  | 30 +++++++++++++++
>>>  arch/arm/mach-zynqmp/zynqmp.c                 | 22 +++++++++++
>>>  images/Makefile                               |  1 +
>>>  images/Makefile.zynqmp                        |  7 ++++
>>>  15 files changed, 214 insertions(+)
>>>  create mode 100644 arch/arm/boards/xilinx-zcu104/Makefile
>>>  create mode 100644 arch/arm/boards/xilinx-zcu104/board.c
>>>  create mode 100644 arch/arm/boards/xilinx-zcu104/lowlevel.c
>>>  create mode 100644 arch/arm/boards/xilinx-zcu104/lowlevel_init.S
>>>  create mode 100644 arch/arm/configs/zynqmp_defconfig
>>>  create mode 100644 arch/arm/mach-zynqmp/Kconfig
>>>  create mode 100644 arch/arm/mach-zynqmp/Makefile
>>>  create mode 100644 arch/arm/mach-zynqmp/include/mach/debug_ll.h
>>>  create mode 100644 arch/arm/mach-zynqmp/zynqmp.c
>>>  create mode 100644 images/Makefile.zynqmp
>>>
>>> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
>>> index 3b486f7b8b..842cbb1485 100644
>>> --- a/arch/arm/Kconfig
>>> +++ b/arch/arm/Kconfig
>>> @@ -245,6 +245,19 @@ config ARCH_ZYNQ
>>>  	bool "Xilinx Zynq-based boards"
>>>  	select HAS_DEBUG_LL
>>>  
>>> +config ARCH_ZYNQMP
>>> +	bool "Xilinx ZynqMP-based boards"
>>> +	select CPU_V8
>>> +	select HAS_DEBUG_LL
>>> +	select HAVE_PBL_MULTI_IMAGES
>>> +	select COMMON_CLK
>>> +	select COMMON_CLK_OF_PROVIDER
>>> +	select CLKDEV_LOOKUP
>>> +	select OFDEVICE
>>> +	select OFTREE
>>> +	select RELOCATABLE
>>> +	select SYS_SUPPORTS_64BIT_KERNEL
>>> +
>>>  config ARCH_QEMU
>>>  	bool "ARM QEMU boards"
>>>  	select HAS_DEBUG_LL
>>> @@ -275,6 +288,7 @@ source arch/arm/mach-tegra/Kconfig
>>>  source arch/arm/mach-uemd/Kconfig
>>>  source arch/arm/mach-zynq/Kconfig
>>>  source arch/arm/mach-qemu/Kconfig
>>> +source arch/arm/mach-zynqmp/Kconfig
>>>  
>>>  config ARM_ASM_UNIFIED
>>>  	bool
>>> diff --git a/arch/arm/Makefile b/arch/arm/Makefile
>>> index 50958b787f..675d3433cc 100644
>>> --- a/arch/arm/Makefile
>>> +++ b/arch/arm/Makefile
>>> @@ -101,6 +101,7 @@ machine-$(CONFIG_ARCH_VEXPRESS)		:= vexpress
>>>  machine-$(CONFIG_ARCH_TEGRA)		:= tegra
>>>  machine-$(CONFIG_ARCH_UEMD)		:= uemd
>>>  machine-$(CONFIG_ARCH_ZYNQ)		:= zynq
>>> +machine-$(CONFIG_ARCH_ZYNQMP)		:= zynqmp
>>>  machine-$(CONFIG_ARCH_QEMU)		:= qemu
>>>  
>>>  
>>> diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile
>>> index 3bf176b14d..a15a24c02e 100644
>>> --- a/arch/arm/boards/Makefile
>>> +++ b/arch/arm/boards/Makefile
>>> @@ -153,6 +153,7 @@ obj-$(CONFIG_MACH_VSCOM_BALTOS)			+= vscom-baltos/
>>>  obj-$(CONFIG_MACH_QEMU_VIRT64)			+= qemu-virt64/
>>>  obj-$(CONFIG_MACH_WARP7)			+= element14-warp7/
>>>  obj-$(CONFIG_MACH_VF610_TWR)			+= freescale-vf610-twr/
>>> +obj-$(CONFIG_MACH_XILINX_ZCU104)		+= xilinx-zcu104/
>>>  obj-$(CONFIG_MACH_ZII_RDU1)			+= zii-imx51-rdu1/
>>>  obj-$(CONFIG_MACH_ZII_RDU2)			+= zii-imx6q-rdu2/
>>>  obj-$(CONFIG_MACH_ZII_VF610_DEV)		+= zii-vf610-dev/
>>> diff --git a/arch/arm/boards/xilinx-zcu104/Makefile b/arch/arm/boards/xilinx-zcu104/Makefile
>>> new file mode 100644
>>> index 0000000000..918615bb76
>>> --- /dev/null
>>> +++ b/arch/arm/boards/xilinx-zcu104/Makefile
>>> @@ -0,0 +1,2 @@
>>> +obj-y += board.o
>>> +lwl-y += lowlevel.o lowlevel_init.o
>>> diff --git a/arch/arm/boards/xilinx-zcu104/board.c b/arch/arm/boards/xilinx-zcu104/board.c
>>> new file mode 100644
>>> index 0000000000..090c366e99
>>> --- /dev/null
>>> +++ b/arch/arm/boards/xilinx-zcu104/board.c
>>> @@ -0,0 +1,25 @@
>>> +/*
>>> + * Copyright (C) 2018 Michael Tretter <m.tretter@xxxxxxxxxxxxxx>
>>> + *
>>> + * This program is free software; you can redistribute it and/or modify it
>>> + * under the terms of the GNU General Public License as published by the Free
>>> + * Software Foundation; either version 2 of the License, or (at your option)
>>> + * any later version.
>>> + *
>>> + * This program is distributed in the hope that it will be useful, but WITHOUT
>>> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
>>> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
>>> + * more details.
>>> + */  
>>
>> It will be better to start use SPDX-License-Identifier for new files.
> 
> Ok.
>  
>>> +#include <common.h>
>>> +#include <init.h>
>>> +
>>> +static int zcu104_console_init(void)  
>>> +{> +	barebox_set_model("Xilinx Zynq UltraScale+ MPSoC ZCU104");  
>>> +	barebox_set_hostname("zcu104");  
>>
>> Latest barebox version can extract model and hostname from devicetree.
>> So, probably we do not need complete board.c file.
> 
> I am assuming that we will need a board.c file once we have more
> devices working. I will remove the board.c anyway and wait until it is
> actually required.
> 
>>> +	return 0;
>>> +}
>>> +console_initcall(zcu104_console_init);
>>> diff --git a/arch/arm/boards/xilinx-zcu104/lowlevel.c b/arch/arm/boards/xilinx-zcu104/lowlevel.c
>>> new file mode 100644
>>> index 0000000000..94ce8b1af9
>>> --- /dev/null
>>> +++ b/arch/arm/boards/xilinx-zcu104/lowlevel.c
>>> @@ -0,0 +1,30 @@
>>> +/*
>>> + * (c) 2018 Michael Tretter <m.tretter@xxxxxxxxxxxxxx>
>>> + *
>>> + * This program is free software; you can redistribute it and/or modify it
>>> + * under the terms of the GNU General Public License as published by the Free
>>> + * Software Foundation; either version 2 of the License, or (at your option)
>>> + * any later version.
>>> + *
>>> + * This program is distributed in the hope that it will be useful, but WITHOUT
>>> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
>>> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
>>> + * more details.
>>> + */
>>> +
>>> +#include <common.h>
>>> +#include <debug_ll.h>
>>> +#include <asm/barebox-arm.h>
>>> +
>>> +extern char __dtb_zynqmp_zcu104_revA_start[];
>>> +
>>> +void zynqmp_zcu104_start(uint32_t, uint32_t, uint32_t);
>>> +
>>> +void noinline zynqmp_zcu104_start(uint32_t r0, uint32_t r1, uint32_t r2)
>>> +{
>>> +	/* Assume that the first stage boot loader configured the UART */
>>> +	putc_ll('>');
>>> +
>>> +	barebox_arm_entry(0, SZ_2G,
>>> +			  __dtb_zynqmp_zcu104_revA_start + global_variable_offset());
>>> +}
>>> diff --git a/arch/arm/boards/xilinx-zcu104/lowlevel_init.S b/arch/arm/boards/xilinx-zcu104/lowlevel_init.S
>>> new file mode 100644
>>> index 0000000000..23f0ee99dd
>>> --- /dev/null
>>> +++ b/arch/arm/boards/xilinx-zcu104/lowlevel_init.S
>>> @@ -0,0 +1,32 @@
>>> +#include <linux/linkage.h>
>>> +#include <init.h>
>>> +#include <asm/barebox-arm-head.h>
>>> +#include <asm/system.h>
>>> +
>>> +#define ENTRY_PROC(name) \
>>> +	.section .text_head_entry_##name; \
>>> +	ENTRY(##name); \
>>> +		b 2f; \
>>> +		nop; \
>>> +		nop; \
>>> +		nop; \
>>> +		nop; \
>>> +		nop; \
>>> +		nop; \
>>> +		nop; \
>>> +		.asciz "barebox"; \
>>> +		.word 0xffffffff; \
>>> +		.word _barebox_image_size; \
>>> +		.rept 8; \
>>> +		.word 0x55555555; \
>>> +		.endr; \
>>> +		2:  
>>
>> Is it some thing SoC specific, or we can move it to some generic place?
> 
> This is a replacement for the ENTRY_FUNCTION(...) macro. I am expecting
> that other arm64 SoCs will use the same macro. However, I wasn't really
> sure how to call it and where to put it. I am thinking about an arm64
> header, but any suggestions are welcome.

I added some thing similar for MIPS, but it was not reviewed
https://github.com/olerem/barebox/commit/43bb4233c0da97bb0b9de53ef89c441bbf1ef4f4


>>
>>> +#define ENTRY_PROC_END(name) \
>>> +	END(##name)
>>> +
>>> +ENTRY_PROC(start_zynqmp_zcu104)
>>> +	mov x0, #0x7ffffff0
>>> +	mov sp, x0
>>> +	b zynqmp_zcu104_start
>>> +ENTRY_PROC_END(start_zynqmp_zcu104)
>>> diff --git a/arch/arm/configs/zynqmp_defconfig b/arch/arm/configs/zynqmp_defconfig
>>> new file mode 100644
>>> index 0000000000..4dea9647fe
>>> --- /dev/null
>>> +++ b/arch/arm/configs/zynqmp_defconfig
>>> @@ -0,0 +1,38 @@
>>> +CONFIG_ARCH_ZYNQMP=y
>>> +CONFIG_MACH_XILINX_ZCU104=y
>>> +CONFIG_MMU=y
>>> +CONFIG_MALLOC_SIZE=0x0
>>> +CONFIG_MALLOC_TLSF=y
>>> +CONFIG_KALLSYMS=y
>>> +CONFIG_HUSH_FANCY_PROMPT=y
>>> +CONFIG_CMDLINE_EDITING=y
>>> +CONFIG_AUTO_COMPLETE=y
>>> +CONFIG_MENU=y
>>> +CONFIG_BOOTM_SHOW_TYPE=y
>>> +CONFIG_BOOTM_VERBOSE=y
>>> +CONFIG_BOOTM_INITRD=y
>>> +CONFIG_BOOTM_OFTREE=y
>>> +CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
>>> +CONFIG_LONGHELP=y
>>> +CONFIG_CMD_MEMINFO=y
>>> +CONFIG_CMD_GO=y
>>> +CONFIG_CMD_RESET=y
>>> +CONFIG_CMD_PARTITION=y
>>> +CONFIG_CMD_EXPORT=y
>>> +CONFIG_CMD_PRINTENV=y
>>> +CONFIG_CMD_MAGICVAR=y
>>> +CONFIG_CMD_MAGICVAR_HELP=y
>>> +CONFIG_CMD_SAVEENV=y
>>> +CONFIG_CMD_LN=y
>>> +CONFIG_CMD_SLEEP=y
>>> +CONFIG_CMD_EDIT=y
>>> +CONFIG_CMD_MENU=y
>>> +CONFIG_CMD_MENU_MANAGEMENT=y
>>> +CONFIG_CMD_READLINE=y
>>> +CONFIG_CMD_TIMEOUT=y
>>> +CONFIG_CMD_CLK=y
>>> +CONFIG_CMD_OFTREE=y
>>> +CONFIG_CMD_TIME=y
>>> +CONFIG_DRIVER_SERIAL_CADENCE=y
>>> +# CONFIG_SPI is not set
>>> +CONFIG_DIGEST=y
>>> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
>>> index 503d9b18f9..0ac3124c8c 100644
>>> --- a/arch/arm/dts/Makefile
>>> +++ b/arch/arm/dts/Makefile
>>> @@ -119,6 +119,7 @@ pbl-dtb-$(CONFIG_MACH_ZII_VF610_DEV) += \
>>>  pbl-dtb-$(CONFIG_MACH_AT91SAM9263EK_DT) += at91sam9263ek.dtb.o
>>>  pbl-dtb-$(CONFIG_MACH_MICROCHIP_KSZ9477_EVB) += at91-microchip-ksz9477-evb.dtb.o
>>>  pbl-dtb-$(CONFIG_MACH_AT91SAM9X5EK) += at91sam9x5ek.dtb.o
>>> +pbl-dtb-$(CONFIG_MACH_XILINX_ZCU104) += zynqmp-zcu104-revA.dtb.o
>>>  
>>>  pbl-dtb-$(CONFIG_MACH_ZII_IMX7D_RPU2) += imx7d-zii-rpu2.dtb.o
>>>  
>>> diff --git a/arch/arm/mach-zynqmp/Kconfig b/arch/arm/mach-zynqmp/Kconfig
>>> new file mode 100644
>>> index 0000000000..1c7727d66c
>>> --- /dev/null
>>> +++ b/arch/arm/mach-zynqmp/Kconfig
>>> @@ -0,0 +1,9 @@
>>> +if ARCH_ZYNQMP
>>> +
>>> +config MACH_XILINX_ZCU104
>>> +	bool "Xilinx Zynq UltraScale+ MPSoC ZCU104"
>>> +	help
>>> +	  Say Y here if you are using the Xilinx Zynq UltraScale+ MPSoC ZCU104
>>> +	  evaluation board.
>>> +
>>> +endif
>>> diff --git a/arch/arm/mach-zynqmp/Makefile b/arch/arm/mach-zynqmp/Makefile
>>> new file mode 100644
>>> index 0000000000..1f4e72abc1
>>> --- /dev/null
>>> +++ b/arch/arm/mach-zynqmp/Makefile
>>> @@ -0,0 +1 @@
>>> +obj-y += zynqmp.o
>>> diff --git a/arch/arm/mach-zynqmp/include/mach/debug_ll.h b/arch/arm/mach-zynqmp/include/mach/debug_ll.h
>>> new file mode 100644
>>> index 0000000000..cd2583a35b
>>> --- /dev/null
>>> +++ b/arch/arm/mach-zynqmp/include/mach/debug_ll.h
>>> @@ -0,0 +1,30 @@
>>> +#ifndef __MACH_DEBUG_LL_H__
>>> +#define __MACH_DEBUG_LL_H__
>>> +
>>> +#include <io.h>
>>> +
>>> +#define ZYNQMP_UART0_BASE		0xFF000000
>>> +#define ZYNQMP_UART1_BASE		0xFF010000
>>> +#define ZYNQMP_UART_BASE		ZYNQMP_UART0_BASE
>>> +#define ZYNQMP_DEBUG_LL_UART_BASE 	ZYNQMP_UART_BASE
>>> +
>>> +#define ZYNQMP_UART_RXTXFIFO	0x30
>>> +#define ZYNQMP_UART_CHANNEL_STS	0x2C
>>> +
>>> +#define ZYNQMP_UART_STS_TFUL	(1 << 4)
>>> +#define ZYNQMP_UART_TXDIS		(1 << 5)
>>> +
>>> +static inline void PUTC_LL(int c)
>>> +{
>>> +	void __iomem *base = (void __iomem *)ZYNQMP_DEBUG_LL_UART_BASE;
>>> +
>>> +	if (readl(base) & ZYNQMP_UART_TXDIS)
>>> +		return;
>>> +
>>> +	while ((readl(base + ZYNQMP_UART_CHANNEL_STS) & ZYNQMP_UART_STS_TFUL) != 0)
>>> +		;
>>> +
>>> +	writel(c, base + 0x30);
>>> +}
>>> +
>>> +#endif
>>> diff --git a/arch/arm/mach-zynqmp/zynqmp.c b/arch/arm/mach-zynqmp/zynqmp.c
>>> new file mode 100644
>>> index 0000000000..04aedb59e0
>>> --- /dev/null
>>> +++ b/arch/arm/mach-zynqmp/zynqmp.c
>>> @@ -0,0 +1,22 @@
>>> +/*
>>> + * (c) 2018 Michael Tretter <m.tretter@xxxxxxxxxxxxxx>
>>> + *
>>> + * This program is free software; you can redistribute it and/or modify it
>>> + * under the terms of the GNU General Public License as published by the Free
>>> + * Software Foundation; either version 2 of the License, or (at your option)
>>> + * any later version.
>>> + *
>>> + * This program is distributed in the hope that it will be useful, but WITHOUT
>>> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
>>> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
>>> + * more details.
>>> + */
>>> +
>>> +#include <common.h>
>>> +#include <init.h>  
>>
>> Do we need it?
> 
> Same as for board.c, but I will remove the file as well.
> 
>>
>>> +static int zynqmp_init(void)
>>> +{
>>> +	return 0;
>>> +}
>>> +postcore_initcall(zynqmp_init);
>>> diff --git a/images/Makefile b/images/Makefile
>>> index 5c4d99ac5a..4d28f73a57 100644
>>> --- a/images/Makefile
>>> +++ b/images/Makefile
>>> @@ -113,6 +113,7 @@ include $(srctree)/images/Makefile.socfpga
>>>  include $(srctree)/images/Makefile.tegra
>>>  include $(srctree)/images/Makefile.vexpress
>>>  include $(srctree)/images/Makefile.at91
>>> +include $(srctree)/images/Makefile.zynqmp
>>>  
>>>  targets += $(image-y) pbl.lds barebox.x barebox.z
>>>  targets += $(patsubst %,%.pblx,$(pblx-y))
>>> diff --git a/images/Makefile.zynqmp b/images/Makefile.zynqmp
>>> new file mode 100644
>>> index 0000000000..f977a6baff
>>> --- /dev/null
>>> +++ b/images/Makefile.zynqmp
>>> @@ -0,0 +1,7 @@
>>> +#
>>> +# barebox image generation Makefile for Xilinx Zynq UltraScale+
>>> +#
>>> +
>>> +pblx-$(CONFIG_MACH_XILINX_ZCU104) += start_zynqmp_zcu104
>>> +FILE_barebox-zynqmp-zcu104.img = start_zynqmp_zcu104.pblx
>>> +image-$(CONFIG_MACH_XILINX_ZCU104) += barebox-zynqmp-zcu104.img
>>>   
>>
>> Sasha posted "ARM: images: Use piggydata" patches. It will be great if
>> you can test you patches on top of piggy patchset.
> 
> Will do.
> 
> Thanks,
> 
> Michael
> 
> _______________________________________________
> barebox mailing list
> barebox@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/barebox
> 


_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox



[Index of Archives]     [Linux Embedded]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux