Hi All,
barebox-2018.11.0 is out. Compared to the October release we have
several fixes in the fs layer, so if you haven't updated already
to a stable release you should update now to this version. UBIFS is now
updated to Kernel version v4.19-rc6 (despite the commit message saying
v4.18-rc6) which brings us support for reading files from images
containing encrypted files (though not for reading actually encrypted
files). Also we have some new features for RATP which now has native
support for i2c and gpio. Other than that as usual many small additions
and fixes, see below.
Have fun
Sascha
----------------------------------------------------------------
Ahmad Fatoum (1):
arm: at91: fix sdram controller init
Aleksander Morgado (7):
ratp: implement i2c read/write support
bbremote: implement i2c read/write support
ratp: implement support for GPIO commands
bbremote: implement support for GPIO operations
ratp: use __packed instead of the full form
ratp: use pr_ macros to print messages
ratp: fix incorrect whitespaces in method calls
Andrey Smirnov (51):
memtest: Adjust code for 64-bit architectures
memtest: Make use of resource_size()
ARM: i.MX: bbu: Add support for v1 header to MMC boot handler
ARM: i.MX51: bbu: Add a handler for MMC boot partitions
ARM: i.MX: bbu: Check retrun value of getenv()
ARM: i.MX: bbu: Convert devicefile to device name
ARM: i.MX: bbu: Detect MMC before reading current boot partition
ARM: VFxxx: bbu: Add a handler for MMC boot partitions
dts: VFxxx: Add aliases for ESDHC controllers
ARM: zii-vf610-dev: Switch MMC BBU to use boot partitions
ARM: rdu2: Switch MMC BBU to use boot partitions
ARM: rdu1: Change BBU names to match RDU2
ARM: rdu1: Switch MMC BBU to use boot partitions
net: fec_imx: Drop extra indentation level by exiting early
net: fec_imx: Don't check bd_status & FEC_RBD_ERR twice
net: fec_imx: Read data_length only once
net: fec_imx: Drop struct fec_frame
net: fec_imx: Drop frame_length
net: fec_imx: Make use of readx_poll_timeout() macros
net: fec_imx: Do not use DMA coherent memory for Rx buffers
ARM: i.MX: boot: Make use of FIELD_GET() in imx51_get_boot_source()
ARM: i.MX: boot: Detect boot instance on i.MX51
ARM: zii-vf610-dev: Convert CFU1 to use upstream DTS
ARM: zii-vf610-dev: Convert SPU3 to use upstream DTS
ARM: i.MX: Add ZII SCU2 Mezz Board
ARM: i.MX: Add ZII SCU3 ESB board
.gitignore: Add .bin.gen.S files found firmware/
clk: i.MX8MQ: Bump refcounters of various important clocks
ARM: i.MX8MQ: Add missing node for ECSPI1
ARM: i.MX8MQ: Configure USDHC1,2 clocks
ARM: i.MX8MQ: Configure FEC1 clocks
ARM: nxp-imx8mq-evk: Add missing compatibility check
ARM: nxp-imx8mq-evk: Add FEC's PHY configuration code
ARM: i.MX: esdctl: Add memory size detection for i.MX8MQ
ARM: nxp-imx8mq-evk: Make use of memory size detection code
clk: i.MX8MQ: Add missing IMX8MQ_CLK_TMU_ROOT clock
aiodev: Port Linux driver for i.MX8MQ CPU thermal sensor
ARM: i.MX8MQ: Add node for CPU thermal sensor
.gitignore: Add .bin.gen.S files found firmware/
ARM: rdu2: Remove now redundant RAVE SP properties/nodes
ARM: rdu1: Remove now redundant RAVE SP properties/nodes
ARM: i.MX: esdctl: Add memory size detection for i.MX7D
ARM: freescale-mx7-sabresd: Make use of imx7d_barebox_entry()
i.MX7D: DCD: Create shared DDR configuration header
ARM: i.MX7: bbu: Add MMC boot handler
ARM: i.MX7: bbu: Add I2C and SPI handler
i.MX: Add support for ZII's i.MX7D-based RPU2 board
bbu: Expose bbu_find_handler_by_*() functions
bbu: Add "handler" parameter to barebox_update()
bbu: command: Make sure specified update handler exists
bbu: Simplify bbu_find_handler_by_device()
Antony Pavlov (2):
checkpatch: don't check TODO file presence
net: make routing work after dhcp command
Bastian Krause (1):
mtd: nand_denali: update compatible
Enrico Jorns (5):
dts: achilles: add state for bootchooser
barebox: move mmc partitions to partitions subnode
ARM: socfpga: achilles: move partitions to free disk space
ARM: socfpga: achilles: bitstream will not exceed 32M
ARM: socfpga: achilles: let bootchooser boot from system0 initially
Ladislav Michl (1):
environment: Fix overlapping partitions error message
Marc Kleine-Budde (1):
scripts: imx-usb-loader: list_imx_device_types(): move variable declaration out of for() loop
Marcin Niestroj (1):
fs: improve ramfs_truncate speed
Sascha Hauer (55):
usb: gadget: fastboot: detect device if not present
kfifo: roundup fifo size to next power of two
mtd: mtdraw: Simplify error path
mtd: mtdraw: use dev_* for printing
mtd: mtdraw: do not write empty buffers
mtd: mtdraw: pass mtdraw around
environment: Allow default env path to be NULL
mtd: mtdraw: add raw page size to private data
mtd: mtdraw: fail when writing fails
mtd: mtdraw: replace "block" with "page"
mtd: mtdraw: fix wrong alignment check
imx-bbu-nand-fcb: Improve error message
imx-bbu-nand-fcb: Workaround ROM not being able to handle bad blocks properly
imx-bbu-nand-fcb: Workaround ROM checking fingerprint before correcting bitflips
environment: Do not use environment when overlapping with other partitions
fs: ramfs: make chunk counting in truncate() better readable
usb: gadget: fastboot: fix downloading files of wMaxPacketSize bytes
ARM: socfpga: Add missing inline to noop functions
Add linux/slab.h
Add kmemdup
Add more mutex no-ops
fs: let dir_emit_dots return int
fs: Add fscrypt no-op headers
fs: Add SB_* flags
fs: implement file_inode
fs: implement iget_locked and iget_failed
fs: implement clear_nlink and set_nlink
fs: ubifs: remove not needed code
compiler: Update to v4.19-rc6
vsprintf: implement %pV
ubifs: Update to v4.18-rc6
fs: ubifs: optionally allow to mount UBIFS images with encrypted files
mtd: do not attach already attached UBI
digest.h: Sync hash_algo values with kernel
dts: update to v4.19-rc3
dts: update to v4.19-rc5
dts: update to v4.19-rc6
dts: update to v4.19-rc7
Merge branch 'for-next/bbu'
Merge branch 'for-next/dts'
Merge branch 'for-next/fs'
Merge branch 'for-next/imx'
Merge branch 'for-next/misc'
Merge branch 'for-next/mtd'
Merge branch 'for-next/net-imx-fec'
Merge branch 'for-next/ratp'
Merge branch 'for-next/socfpga'
Merge branch 'for-next/ubifs'
environment: bypass overlap check for mtd devices
fs: implement d_revalidate
fs: devfs: implement d_revalidate hook
of: unflatten: access property properly
usb: gadget: fastboot: remove unused variable
kconfig: Avoid format overflow warning from GCC 8.1
Release v2018.11.0
Steffen Trumtrar (1):
ARM: dts: socfpga: achilles: enable second ethernet port
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
