So we can have a persistent env and a bit safer barebox update. Also switch the environment and update default depending on the bootsource, as this is really helpful on an eval board where one might want to have totally different systems on eMMC and SD card. Signed-off-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx> --- arch/arm/boards/nxp-imx8mq-evk/board.c | 20 +++++++++++--- arch/arm/dts/imx8mq-evk.dts | 37 ++++++++++++++++++++++++++ 2 files changed, 54 insertions(+), 3 deletions(-) diff --git a/arch/arm/boards/nxp-imx8mq-evk/board.c b/arch/arm/boards/nxp-imx8mq-evk/board.c index 7918b5fb3e36..299d056e2777 100644 --- a/arch/arm/boards/nxp-imx8mq-evk/board.c +++ b/arch/arm/boards/nxp-imx8mq-evk/board.c @@ -17,11 +17,12 @@ * */ +#include <asm/memory.h> +#include <bootsource.h> #include <common.h> #include <init.h> -#include <asm/memory.h> -#include <linux/sizes.h> #include <linux/phy.h> +#include <linux/sizes.h> #include <mach/bbu.h> #include <envfs.h> @@ -47,12 +48,25 @@ static int ar8031_phy_fixup(struct phy_device *phydev) static int nxp_imx8mq_evk_init(void) { + int flags; + if (!of_machine_is_compatible("fsl,imx8mq-evk")) return 0; barebox_set_hostname("imx8mq-evk"); - imx8mq_bbu_internal_mmc_register_handler("eMMC", "/dev/mmc0", 0); + flags = bootsource_get_instance() == 0 ? BBU_HANDLER_FLAG_DEFAULT : 0; + imx8mq_bbu_internal_mmc_register_handler("eMMC", + "/dev/mmc0.barebox", flags); + + flags = bootsource_get_instance() == 1 ? BBU_HANDLER_FLAG_DEFAULT : 0; + imx8mq_bbu_internal_mmc_register_handler("SD", + "/dev/mmc1.barebox", flags); + + if (bootsource_get_instance() == 0) + of_device_enable_path("/chosen/environment-emmc"); + else + of_device_enable_path("/chosen/environment-sd"); phy_register_fixup_for_uid(PHY_ID_AR8031, AR_PHY_ID_MASK, ar8031_phy_fixup); diff --git a/arch/arm/dts/imx8mq-evk.dts b/arch/arm/dts/imx8mq-evk.dts index a6e724e2e2a5..56a35173a04f 100644 --- a/arch/arm/dts/imx8mq-evk.dts +++ b/arch/arm/dts/imx8mq-evk.dts @@ -15,6 +15,17 @@ chosen { stdout-path = &uart1; + + environment-emmc { + compatible = "barebox,environment"; + device-path = &usdhc1, "partname:barebox-environment"; + status = "disabled"; + }; + environment-sd { + compatible = "barebox,environment"; + device-path = &usdhc2, "partname:barebox-environment"; + status = "disabled"; + }; }; reg_usdhc2_vmmc: regulator-vsd-3v3 { @@ -177,6 +188,19 @@ no-sd; no-sdio; status = "okay"; + + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "barebox"; + reg = <0x0 0xe0000>; + }; + + partition@e0000 { + label = "barebox-environment"; + reg = <0xe0000 0x20000>; + }; }; &usdhc2 { @@ -190,6 +214,19 @@ cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; vmmc-supply = <®_usdhc2_vmmc>; status = "okay"; + + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "barebox"; + reg = <0x0 0xe0000>; + }; + + partition@e0000 { + label = "barebox-environment"; + reg = <0xe0000 0x20000>; + }; }; &wdog1 { -- 2.19.1 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox