Make sure that there's a space between device name and it's status string regardless if if device is using "id" field or not. Before: barebox@ZII RDU2 Board:/ miitool mdio0-phy00: mdio:no link mdio1-phy15: 2188000.ethernet@2188000:10 Mbit, half duplex, no link mdio1-phy16: 2188000.ethernet@2188000:10 Mbit, half duplex, no link mdio2-phy00: 2188000.ethernet@2188000:mdio:switch@0:no link mdio2-phy01: 2188000.ethernet@2188000:mdio:switch@0:no link mdio2-phy02: 2188000.ethernet@2188000:mdio:switch@0:negotiated 100baseTx-FD, link ok mdio2-phy03: 2188000.ethernet@2188000:mdio:switch@0:no link mdio2-phy04: 2188000.ethernet@2188000:mdio:switch@0:no link mdio3-phy01: eth1: negotiated 1000baseT-FD flow-control, link ok After: barebox@ZII RDU2 Board:/ miitool mdio0-phy00: mdio: no link mdio1-phy15: 2188000.ethernet@2188000: 10 Mbit, half duplex, no link mdio1-phy16: 2188000.ethernet@2188000: 10 Mbit, half duplex, no link mdio2-phy00: 2188000.ethernet@2188000:mdio:switch@0: no link mdio2-phy01: 2188000.ethernet@2188000:mdio:switch@0: no link mdio2-phy02: 2188000.ethernet@2188000:mdio:switch@0: no link mdio2-phy03: 2188000.ethernet@2188000:mdio:switch@0: no link mdio2-phy04: 2188000.ethernet@2188000:mdio:switch@0: no link mdio3-phy01: eth1: no link Signed-off-by: Andrey Smirnov <andrew.smirnov@xxxxxxxxx> --- commands/miitool.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/commands/miitool.c b/commands/miitool.c index dea4f853c..acf61421b 100644 --- a/commands/miitool.c +++ b/commands/miitool.c @@ -115,7 +115,7 @@ static int show_basic_mii(struct mii_bus *mii, struct phy_device *phydev, for (i = 0; i < 32; i++) mii_val[i] = mii->read(mii, phydev->addr, i); - printf((mii->parent->id) < 0 ? "%s: %s:" : "%s: %s%d: ", + printf((mii->parent->id) < 0 ? "%s: %s: " : "%s: %s%d: ", phydev->cdev.name, mii->parent->name, mii->parent->id); -- 2.17.1 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
