samx6i_get_size() is declared and used in two different C files.
Provide a header file for the prototype instead.
Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
---
arch/arm/boards/kontron-samx6i/board.c | 2 +-
arch/arm/boards/kontron-samx6i/lowlevel.c | 2 +-
arch/arm/boards/kontron-samx6i/mem.c | 2 ++
arch/arm/boards/kontron-samx6i/mem.h | 6 ++++++
4 files changed, 10 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/boards/kontron-samx6i/mem.h
diff --git a/arch/arm/boards/kontron-samx6i/board.c b/arch/arm/boards/kontron-samx6i/board.c
index 01826b67d2..b4b0eac824 100644
--- a/arch/arm/boards/kontron-samx6i/board.c
+++ b/arch/arm/boards/kontron-samx6i/board.c
@@ -23,7 +23,7 @@
#include <asm/armlinux.h>
-resource_size_t samx6i_get_size(void);
+#include "mem.h"
/*
* On this board the SDRAM size is always configured by pin selection.
diff --git a/arch/arm/boards/kontron-samx6i/lowlevel.c b/arch/arm/boards/kontron-samx6i/lowlevel.c
index 5c35007040..9742469e20 100644
--- a/arch/arm/boards/kontron-samx6i/lowlevel.c
+++ b/arch/arm/boards/kontron-samx6i/lowlevel.c
@@ -20,7 +20,7 @@
#include <mach/imx6.h>
#include <mach/esdctl.h>
-resource_size_t samx6i_get_size(void);
+#include "mem.h"
static inline void setup_uart(void)
{
diff --git a/arch/arm/boards/kontron-samx6i/mem.c b/arch/arm/boards/kontron-samx6i/mem.c
index ab9969e32c..3b9fbd464a 100644
--- a/arch/arm/boards/kontron-samx6i/mem.c
+++ b/arch/arm/boards/kontron-samx6i/mem.c
@@ -15,6 +15,8 @@
#include <mach/imx-gpio.h>
#include <mach/imx6.h>
+#include "mem.h"
+
#define PCBVERSION_PIN IMX_GPIO_NR(2, 2)
#define PCBID0_PIN IMX_GPIO_NR(6, 7)
#define PCBID1_PIN IMX_GPIO_NR(6, 9)
diff --git a/arch/arm/boards/kontron-samx6i/mem.h b/arch/arm/boards/kontron-samx6i/mem.h
new file mode 100644
index 0000000000..252b82621d
--- /dev/null
+++ b/arch/arm/boards/kontron-samx6i/mem.h
@@ -0,0 +1,6 @@
+#ifndef __BOARD_KONTRON_SAMX6I_MEM_H
+#define __BOARD_KONTRON_SAMX6I_MEM_H
+
+resource_size_t samx6i_get_size(void);
+
+#endif /* __BOARD_KONTRON_SAMX6I_MEM_H */
\ No newline at end of file
--
2.19.0
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
