From: Marc Reilly <marc@xxxxxxxxxxxxxxx>
Signed-off-by: Marc Reilly <marc@xxxxxxxxxxxxxxx>
---
dts/src/arm/am335x-bone-common.dtsi | 414 +-----------------------------------
1 file changed, 1 insertion(+), 413 deletions(-)
diff --git a/dts/src/arm/am335x-bone-common.dtsi b/dts/src/arm/am335x-bone-common.dtsi
index f9e8667f5..8711802f5 100644
--- a/dts/src/arm/am335x-bone-common.dtsi
+++ b/dts/src/arm/am335x-bone-common.dtsi
@@ -6,416 +6,4 @@
* published by the Free Software Foundation.
*/
-/ {
- cpus {
- cpu@0 {
- cpu0-supply = <&dcdc2_reg>;
- };
- };
-
- memory@80000000 {
- device_type = "memory";
- reg = <0x80000000 0x10000000>; /* 256 MB */
- };
-
- chosen {
- stdout-path = &uart0;
- };
-
- leds {
- pinctrl-names = "default";
- pinctrl-0 = <&user_leds_s0>;
-
- compatible = "gpio-leds";
-
- led2 {
- label = "beaglebone:green:heartbeat";
- gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "heartbeat";
- default-state = "off";
- };
-
- led3 {
- label = "beaglebone:green:mmc0";
- gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "mmc0";
- default-state = "off";
- };
-
- led4 {
- label = "beaglebone:green:usr2";
- gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "cpu0";
- default-state = "off";
- };
-
- led5 {
- label = "beaglebone:green:usr3";
- gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "mmc1";
- default-state = "off";
- };
- };
-
- vmmcsd_fixed: fixedregulator0 {
- compatible = "regulator-fixed";
- regulator-name = "vmmcsd_fixed";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-};
-
-&am33xx_pinmux {
- pinctrl-names = "default";
- pinctrl-0 = <&clkout2_pin>;
-
- user_leds_s0: user_leds_s0 {
- pinctrl-single,pins = <
- AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */
- AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a6.gpio1_22 */
- AM33XX_IOPAD(0x85c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */
- AM33XX_IOPAD(0x860, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio1_24 */
- >;
- };
-
- i2c0_pins: pinmux_i2c0_pins {
- pinctrl-single,pins = <
- AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
- AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
- >;
- };
-
- i2c2_pins: pinmux_i2c2_pins {
- pinctrl-single,pins = <
- AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_ctsn.i2c2_sda */
- AM33XX_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_rtsn.i2c2_scl */
- >;
- };
-
- uart0_pins: pinmux_uart0_pins {
- pinctrl-single,pins = <
- AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
- AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
- >;
- };
-
- clkout2_pin: pinmux_clkout2_pin {
- pinctrl-single,pins = <
- AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */
- >;
- };
-
- cpsw_default: cpsw_default {
- pinctrl-single,pins = <
- /* Slave 1 */
- AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxerr.mii1_rxerr */
- AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */
- AM33XX_IOPAD(0x918, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */
- AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd3.mii1_txd3 */
- AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd2.mii1_txd2 */
- AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd1.mii1_txd1 */
- AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd0.mii1_txd0 */
- AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_txclk.mii1_txclk */
- AM33XX_IOPAD(0x930, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */
- AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */
- AM33XX_IOPAD(0x938, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */
- AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */
- AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */
- >;
- };
-
- cpsw_sleep: cpsw_sleep {
- pinctrl-single,pins = <
- /* Slave 1 reset value */
- AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
- >;
- };
-
- davinci_mdio_default: davinci_mdio_default {
- pinctrl-single,pins = <
- /* MDIO */
- AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
- AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
- >;
- };
-
- davinci_mdio_sleep: davinci_mdio_sleep {
- pinctrl-single,pins = <
- /* MDIO reset value */
- AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
- AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
- >;
- };
-
- mmc1_pins: pinmux_mmc1_pins {
- pinctrl-single,pins = <
- AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spio0_cs1.gpio0_6 */
- AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
- AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
- AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
- AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
- AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
- AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */
- AM33XX_IOPAD(0x9a0, PIN_INPUT | MUX_MODE4) /* mcasp0_aclkr.mmc0_sdwp */
- >;
- };
-
- emmc_pins: pinmux_emmc_pins {
- pinctrl-single,pins = <
- AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
- AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
- AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
- AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
- AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
- AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
- AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
- AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
- AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
- AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
- >;
- };
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins>;
-
- status = "okay";
-};
-
-&usb {
- status = "okay";
-};
-
-&usb_ctrl_mod {
- status = "okay";
-};
-
-&usb0_phy {
- status = "okay";
-};
-
-&usb1_phy {
- status = "okay";
-};
-
-&usb0 {
- status = "okay";
- dr_mode = "peripheral";
- interrupts-extended = <&intc 18 &tps 0>;
- interrupt-names = "mc", "vbus";
-};
-
-&usb1 {
- status = "okay";
- dr_mode = "host";
-};
-
-&cppi41dma {
- status = "okay";
-};
-
-&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins>;
-
- status = "okay";
- clock-frequency = <400000>;
-
- tps: tps@24 {
- reg = <0x24>;
- };
-
- baseboard_eeprom: baseboard_eeprom@50 {
- compatible = "atmel,24c256";
- reg = <0x50>;
-
- #address-cells = <1>;
- #size-cells = <1>;
- baseboard_data: baseboard_data@0 {
- reg = <0 0x100>;
- };
- };
-};
-
-&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins>;
-
- status = "okay";
- clock-frequency = <100000>;
-
- cape_eeprom0: cape_eeprom0@54 {
- compatible = "atmel,24c256";
- reg = <0x54>;
- #address-cells = <1>;
- #size-cells = <1>;
- cape0_data: cape_data@0 {
- reg = <0 0x100>;
- };
- };
-
- cape_eeprom1: cape_eeprom1@55 {
- compatible = "atmel,24c256";
- reg = <0x55>;
- #address-cells = <1>;
- #size-cells = <1>;
- cape1_data: cape_data@0 {
- reg = <0 0x100>;
- };
- };
-
- cape_eeprom2: cape_eeprom2@56 {
- compatible = "atmel,24c256";
- reg = <0x56>;
- #address-cells = <1>;
- #size-cells = <1>;
- cape2_data: cape_data@0 {
- reg = <0 0x100>;
- };
- };
-
- cape_eeprom3: cape_eeprom3@57 {
- compatible = "atmel,24c256";
- reg = <0x57>;
- #address-cells = <1>;
- #size-cells = <1>;
- cape3_data: cape_data@0 {
- reg = <0 0x100>;
- };
- };
-};
-
-
-/include/ "tps65217.dtsi"
-
-&tps {
- /*
- * Configure pmic to enter OFF-state instead of SLEEP-state ("RTC-only
- * mode") at poweroff. Most BeagleBone versions do not support RTC-only
- * mode and risk hardware damage if this mode is entered.
- *
- * For details, see linux-omap mailing list May 2015 thread
- * [PATCH] ARM: dts: am335x-bone* enable pmic-shutdown-controller
- * In particular, messages:
- * http://www.spinics.net/lists/linux-omap/msg118585.html
- * http://www.spinics.net/lists/linux-omap/msg118615.html
- *
- * You can override this later with
- * &tps { /delete-property/ ti,pmic-shutdown-controller; }
- * if you want to use RTC-only mode and made sure you are not affected
- * by the hardware problems. (Tip: double-check by performing a current
- * measurement after shutdown: it should be less than 1 mA.)
- */
-
- interrupts = <7>; /* NMI */
- interrupt-parent = <&intc>;
-
- ti,pmic-shutdown-controller;
-
- charger {
- status = "okay";
- };
-
- pwrbutton {
- status = "okay";
- };
-
- regulators {
- dcdc1_reg: regulator@0 {
- regulator-name = "vdds_dpr";
- regulator-always-on;
- };
-
- dcdc2_reg: regulator@1 {
- /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
- regulator-name = "vdd_mpu";
- regulator-min-microvolt = <925000>;
- regulator-max-microvolt = <1351500>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- dcdc3_reg: regulator@2 {
- /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
- regulator-name = "vdd_core";
- regulator-min-microvolt = <925000>;
- regulator-max-microvolt = <1150000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ldo1_reg: regulator@3 {
- regulator-name = "vio,vrtc,vdds";
- regulator-always-on;
- };
-
- ldo2_reg: regulator@4 {
- regulator-name = "vdd_3v3aux";
- regulator-always-on;
- };
-
- ldo3_reg: regulator@5 {
- regulator-name = "vdd_1v8";
- regulator-always-on;
- };
-
- ldo4_reg: regulator@6 {
- regulator-name = "vdd_3v3a";
- regulator-always-on;
- };
- };
-};
-
-&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <0>;
- phy-mode = "mii";
-};
-
-&mac {
- slaves = <1>;
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&cpsw_default>;
- pinctrl-1 = <&cpsw_sleep>;
- status = "okay";
-};
-
-&davinci_mdio {
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&davinci_mdio_default>;
- pinctrl-1 = <&davinci_mdio_sleep>;
- status = "okay";
-};
-
-&mmc1 {
- status = "okay";
- bus-width = <0x4>;
- pinctrl-names = "default";
- pinctrl-0 = <&mmc1_pins>;
- cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
-};
-
-&aes {
- status = "okay";
-};
-
-&sham {
- status = "okay";
-};
-
-&rtc {
- clocks = <&clk_32768_ck>, <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>;
- clock-names = "ext-clk", "int-clk";
-};
+#include <arm/am335x-bone-common.dtsi>
--
2.16.4
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
