Hi all. I try to boot my target using NFS - but something does not work. I have a server (192.168.86.201) where I have exported an nfs mount like this: $ sudo exportfs /nfsboot/arm9 <world> $ cat /etc/exports.d/nfsboot.exports /nfsboot/arm9 *(insecure,no_subtree_check,no_root_squash,rw,nohide) On my barebox target I can then mount the nfs like this: barebox: mkdir /mnt barebox: /mnt/nfs barebox: mount -t nfs 192.168.86.201:/nfsboot/arm9 barebox: mount none on / type ramfs none on /dev type devfs 192.168.86.201:/nfsboot/arm9 on /mnt/nfs type nfs barebox: ls /mnt/nfs <= shows the file I have on the server Then when I try to boot from nfs I get the following output: barebox: boot nfs://192.168.86.201/nfsboot/arm9/ eth0: DHCP client bound to address 192.168.86.20 T T T T T T T T T T T T T T could not open /.tftp_tmp_path/zImage-at91sam9263ek When I grep the barebox source I can only find 'tftp_tmp_path' in some tftp code. It looks like it somehow revert back to tftp despite I have specified nfs. I hope there is something trivial I do wrong. Any hints? Sam _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
