Rename bo_int to prev_bo_enirq to make its purpose clearer, and throw in a few comments for easier understanding. Signed-off-by: Roland Hieber <r.hieber@xxxxxxxxxxxxxx> --- arch/arm/mach-mxs/power-init.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-mxs/power-init.c b/arch/arm/mach-mxs/power-init.c index db597ef65c..060bd9115b 100644 --- a/arch/arm/mach-mxs/power-init.c +++ b/arch/arm/mach-mxs/power-init.c @@ -1066,7 +1066,7 @@ static void mxs_power_set_vddx(const struct mxs_vddx_cfg *cfg, { struct mxs_power_regs *power_regs = (struct mxs_power_regs *)IMX_POWER_BASE; - uint32_t cur_target, diff, bo_int = 0; + uint32_t cur_target, diff, prev_bo_enirq = 0; uint32_t powered_by_linreg = 0; int adjust_up, tmp; @@ -1082,8 +1082,10 @@ static void mxs_power_set_vddx(const struct mxs_vddx_cfg *cfg, powered_by_linreg = cfg->powered_by_linreg(); if (adjust_up && cfg->bo_irq) { + /* temporarily disable brownout to prevent it from taking + effect prematurely during the adjustment */ if (powered_by_linreg) { - bo_int = readl(&power_regs->hw_power_ctrl); + prev_bo_enirq = readl(&power_regs->hw_power_ctrl) & cfg->bo_enirq; writel(cfg->bo_enirq, &power_regs->hw_power_ctrl_clr); } setbits_le32(cfg->reg, cfg->bo_offset_mask); @@ -1124,8 +1126,10 @@ static void mxs_power_set_vddx(const struct mxs_vddx_cfg *cfg, if (cfg->bo_irq) { if (adjust_up && powered_by_linreg) { + /* clear brownout IRQ flag in case it fired */ writel(cfg->bo_irq, &power_regs->hw_power_ctrl_clr); - if (bo_int & cfg->bo_enirq) + if (prev_bo_enirq) + /* re-enable brownout IRQ after adjustment has finished */ writel(cfg->bo_enirq, &power_regs->hw_power_ctrl_set); } -- 2.18.0 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox