Hi All,
v2018.07.0 is out. With this release finally lands the i.MX8MQ support.
After several preparations in the aarch64 area we now have support for
a first 64bit Arm SoC in mainline. Give it a try if you have the
hardware.
Have fun
Sascha
----------------------------------------------------------------
Alexander Kurz (3):
ARM: i.MX50: Replace expicit casts with IOMEM
ARM: i.MX50: Record reset reason as a part of startup
ARM: i.MX50: fix Kindle-MX50 DT issues and warnings
Andrey Smirnov (71):
ARM: mmu: Remove unused ARM_VECTORS_SIZE
ARM: mmu: Make use of IS_ALIGNED in arm_mmu_remap_sdram()
ARM: mmu: Use ALIGN and ALIGN_DOWN in map_cachable()
ARM: mmu: Introduce set_ttbr()
ARM: mmu: Introduce set_domain()
ARM: mmu: Share code for create_sections()
ARM: mmu: Separate index and address in create_sections()
sizes.h: Sync with Linux 4.16
ARM: mmu: Specify size in bytes in create_sections()
ARM: mmu: Share code for initial flat mapping creation
ARM: mmu: Share PMD_SECT_DEF_CACHED
ARM: mmu: Drop needless shifting in map_io_sections()
ARM: mmu: Replace hardcoded shifts with pgd_index() from Linux
ARM: mmu: Trivial simplification in arm_mmu_remap_sdram()
ARM: mmu: Replace various SZ_1M with PGDIR_SIZE
ARM: mmu: Use PAGE_SIZE when specifying size of one page
ARM: mmu: Define and use PTRS_PER_PTE
ARM: mmu: Use PAGE_SIZE instead of magic right shift by 12
ARM: mmu: Use xmemalign in arm_create_pte()
ARM: mmu: Use xmemalign in mmu_init()
ARM: mmu: Share code between dma_alloc_*() functions
ARM: mmu: Pass PTE flags a parameter to arm_create_pte()
of: Make of_property_get_value() public
bootsource: Add bootsource alias name API
common: oftree: Pass bootsource and bootsource instance to kernel
common: oftree: Pass reset source and reset source instance to kernel
ARM: mmu: Make sure that address is 1M aligned in arm_create_pte()
ARM: mmu: Use find_pte() to find PTE in create_vector_table()
ARM: mmu: Use dma_inv_range() in dma_sync_single_for_cpu()
ARM: mmu: Simplify the use of dma_flush_range()
ARM: mmu: Implement on-demand PTE allocation
ARM: mmu: Introduce ARM_TTB_SIZE
scripts/mkimage: Fix strncpy usage
nvmem: snvs_lpgpr: Drop stray commas
i.MX: ocotp: Unify code paths for reading MAC address
i.MX: ocotp: Change MAC address layout for VFxxx
i.MX: ocotp: Simplify OCOTP field packing/unpacking
i.MX: ocotp: Simplify BF macro
i.MX: ocotp: Move OCOTP driver to drivers/nvmem
nvmem: Use name from struct nvmem_config for cdev
nvmem: ocotp: Convert to NVMEM device
ARM: mmu64: Trivial code simplification
ARM: mmu64: Make use of create_table()
ARM: mmu64: Convert flags in arch_remap_range()
ARM: no-mmu: Disable building for ARMv8
ARM: mmu: Make use of dsb() and isb() helpers
ARM: interrupts64: Include ESR value in exception traceback
ARM: cache: Remove unused cache ops struct
ARM: include: dma: Add missing no-MMU stubs
net: fec_imx: Make use of IS_ALIGNED
ARM: i.MX: Split shared CCM code into a separate file
ARM: i.MX: Add IOMUX pad constants for i.MX8
ARM: i.MX: Add basic CCM constants for i.MX8
ARM: Add constants and helpers for system counter interface
clocksource: armv8-timer: Convert explicit assembly into helpers
ARM: i.MX8: Initialize system counter
ARM: i.MX: boot: Fix address casting on 64-bit platforms
ARM: boot: Add trivial i.MX8 support
ARM: i.MX: xload-esdhc: Rework to make code be less i.MX6-specific
ARM: i.MX: xload-esdhc: Allow custom buffer address, device offset
ARM: i.MX: xload-esdhc: Add support for i.MX8
pinctrl: i.MX: Add support for i.MX8
Documentation: imx: Change block size for 'dd' to 1024
Documentation: i.MX: Add missing <soctype>
clocksource: armv8-timer: Make armv8_clocksource_read() static
clocksource: armv8-timer: Make use of postcore_platform_driver()
scripts: imx-image: Drop error return from write_dcd()
scripts: imx-image: Limit v2 header size to HEADER_LEN
ARM: lib64: Make string functions aware of MMU configuration
ARM: i.MX8: Add DDRC PHY and DDR CTL base addresses
ARM: VFxxx: Record cpu boot source as a part of startup
Baeuerle, Florian (2):
commands/of_property: add option to apply changes as fixup
commands/of_node: add option to apply changes as fixup
Heinrich.Toews@xxxxxxxx (1):
mtd: nand: omap_gpmc: fix: remove bch4 string extant
Lucas Stach (1):
bbu: imx-bbu-internal: add i.MX51 SPI/I2C flash handler
Masahiro Yamada (1):
.gitignore: sort normal pattern rules alphabetically
Nikita Yushchenko (2):
clk: add clk-gpio driver
clk: support pinmux configuration in clock provider nodes
Oleksij Rempel (2):
defaultenv-2: make abort key to stop autoboot configurable
ARM: i.MX: esdctl: Add support for i.MX6SoloX's memory controller
Pascal Vizeli (1):
scripts/dtc: Update to upstream version 1.4.6
Peter Mamonov (12):
resource: fix iomem_resource.end for 64 bit systems
mw command: add `-x` option description
mtd: cfi-flash: fix write_buff() for 64 bit systems
i2c-mux-pca954x: fix out-of-bounds write for 64 bit systems
MIPS: import 64-bit address conversion macros
include/common.h: move IOMEM declaration for MIPS to arch/mips/include/asm/io.h
MIPS: add proper IOMEM() declaration for MIPS64
MIPS: fix copy_to_link_location for 64 bit mode
MIPS: use CKSEG1 instead of KSEG1
MIPS: add PHYS_ADDR_T_64BIT option
MIPS: 64BIT selects PHYS_ADDR_T_64BIT
MIPS: don't use optimized string functions for MIPS64
Philipp Zabel (1):
ARM: imx6qp: fix NoC QoS passthrough for new cpu type functions.
Roland Hieber (3):
README: describe how to build the documentation
doc: boards: imx: link to mxs documentation
scripts: gitignore omap3-usb-loader binary
Sascha Hauer (36):
dts: update to v4.17-rc4
dts: update to v4.17-rc5
dts: update to v4.17-rc6
imx-usb-loader: Align uploaded file length
imx-usb-loader: Fix verify for non word aligned lengths
imx-usb-loader: dump memory bytewise on verification mismatch
ARM: mmu: only create flat mapping when early MMU hasn't done it already
dts: update to v4.17-rc7
ARM: i.MX: xload: Fix compiler warning
ARM: i.MX: compile arm32 specific errata only for CPU32
ARM: Add i.MX8 support
ARM: i.MX: ocotp: Add i.MX8MQ support
Kbuild: Add $(quote)
Add builtin firmware support
dts: update to v4.17
Include our own include/dt-bindings
mci: imx-esdhc: use dma mapping functions
net: fec_imx: remove unnecessary DMA sync ops
net: fec_imx: Use dma mapping functions
clock: Add i.MX8MQ clock driver
serial: i.MX: Add i.MX8 support
aarch64: Add i.MX8 debug UART support
mmc: i.MX esdhc: Add i.MX8 support
gpio: i.MX: Add i.MX8mq support
scripts: omap3-usb-loader: fix compiler warning
Merge branch 'for-next/arm'
Merge branch 'for-next/arm-mmu'
Merge branch 'for-next/clk'
Merge branch 'for-next/dts'
Merge branch 'for-next/imx'
Merge branch 'for-next/imx-ocotp'
Merge branch 'for-next/mips'
Merge branch 'for-next/misc'
Merge branch 'for-next/mvebu'
Merge branch 'for-next/of-bootsource'
Release v2018.07.0
Teresa Remmet (2):
mtd: nand: nand_omap_gpmc: Fix ecc steps
commands: mmc_extcsd: Add support to write multibyte registers
Uwe Kleine-König (8):
dove: move memory controller remapping before RAM detection
dove: fix bit layout of DOVE_CPU_CTRL register
kwbimage_v0: add support to detect and boot a mvebu v0 image
libfile: implement new helper write_file_flash()
omap/am33xx_bbu: use file_write_flash() instead of its own variant
scripts/kwboot: fix image check for v0 images
scripts: create a separate section for host tools
Documentation: use https for Pengutronix services
Vivien Didelot (1):
net: use dev_warn() when no MAC address is set
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
