[PATCH] ARM: rdu2: program e1000 iNVM

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Check if the iNVM is already correctly written. If it isn't write
the correct value in, so the device uses the correct PCI ID for the
Linux driver.

Signed-off-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
---
 arch/arm/boards/zii-imx6q-rdu2/board.c | 29 ++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/arch/arm/boards/zii-imx6q-rdu2/board.c b/arch/arm/boards/zii-imx6q-rdu2/board.c
index 265f97e2f464..984ca42a3772 100644
--- a/arch/arm/boards/zii-imx6q-rdu2/board.c
+++ b/arch/arm/boards/zii-imx6q-rdu2/board.c
@@ -15,6 +15,7 @@
 
 #include <common.h>
 #include <envfs.h>
+#include <fs.h>
 #include <gpio.h>
 #include <init.h>
 #include <mach/bbu.h>
@@ -151,3 +152,31 @@ static int rdu2_devices_init(void)
 	return 0;
 }
 device_initcall(rdu2_devices_init);
+
+static int rdu2_i210_invm(void)
+{
+	int fd;
+	u32 val;
+
+	if (!of_machine_is_compatible("zii,imx6q-zii-rdu2") &&
+	    !of_machine_is_compatible("zii,imx6qp-zii-rdu2"))
+		return 0;
+
+	fd = open("/dev/e1000-invm0", O_RDWR);
+	if (fd < 0) {
+		pr_err("could not open e1000 iNVM device!\n");
+		return fd;
+	}
+
+	pread(fd, &val, sizeof(val), 0);
+	if (val == 0x157b1a11) {
+		pr_debug("i210 already programmed correctly\n");
+		return 0;
+	}
+
+	val = 0x157b1a11;
+	pwrite(fd, &val, sizeof(val), 0);
+
+	return 0;
+}
+late_initcall(rdu2_i210_invm);
-- 
2.17.1


_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox



[Index of Archives]     [Linux Embedded]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux