This file was last touched in 2014-12, 2010-07 and 2009-12 and has at most historical value. Most of the open tasks are done, if not, they are probably out of date anyway. Signed-off-by: Roland Hieber <r.hieber@xxxxxxxxxxxxxx> --- TODO | 110 ------------------------------------------------------------------- 1 file changed, 110 deletions(-) delete mode 100644 TODO diff --git a/TODO b/TODO deleted file mode 100644 index 8527e577e0..0000000000 --- a/TODO +++ /dev/null @@ -1,110 +0,0 @@ -TODO ----- - -[ ] ask jbe about: - ./commands/Makefile:40:obj-$(CONFIG_SIMPLE_PARSER) += setenv.o -[ ] bark on partition not ending on flash sector boundaries -[ ] Every driver should have a remove function. - (It must have. Currently there is no provision to given to remove my - interrupt handlers and to reset all hardware in use, before the target - OS is called. csc 21.03.2008 19:50:34) -[ ] Global shutdown_drivers() function is needed to carefully clean up all - interrupt handlers and reset hardware to initial post reset or otherwise - save state. - (Ideally the hardware is set back to post-reset state after this call. - Run-up and run-down should be reentrant, so if bootm is failing the system - can re-initialize devices. csc 21.03.2008 19:48:49) -[ ] Clean up make system. Currently I think there are many things from the - Linux make system which are not needed for barebox. - (Please retain definitions and related for module loading and relocation, so - that special barebox modules containing an ELF object can be linked to the - running barebox. csc 21.03.2008 19:52:49) -[ ] get/set for nonextisting parameters crashes -[ ] There is a xmalloc function which panics when out of memory. Use this - function where we don't want to check for oom. Same applies to - strdup/xstrdup. -[ ] cleanup common.h. There are far too many things in it where we better have - a seperate header file. - (Use doxygen to track header file hierarchy) -[ ] Rewrite network stack. The one-loop-for-all-protocols stack is just too - ugly and big and uses thousands of global variables. Identify common - functions and make a loop per network protocol -[-] Cleanup cpu/*. Many functions there are not cpu specific. For example the - cache functions for arm are common for most arm processors. (done for ARM) - (I will check this for m68k arch - csc 21.03.2008 19:56:24) -[ ] Move SoC specific header files from include/ to include/asm/arch/ -[ ] Several .c/.h files do not have GNU/copyright headers. -[ ] The cramfs driver currently uses direct memory accesses instead of read(). - This disqualifies it for real block devices. -[ ] Add documentation for: - [ ] driver model - [ ] device parameter - [ ] big picture -[ ] Add example driver and filesystem for reference purposes. Or denote a driver - and a filesystem to be the reference. -[ ] realloc seems to crash without further notice when out of memory. -[ ] implement a mmap() function. Of course we cannot really mmap without mmu, - but for memory mapped devices like nor flash we could provide a pointer to - it. With this we would not have to copy uimages to memory. -[ ] command line editing is somewhat broken -[ ] how to select a ethernet channel for tftp when more than one interface - of this type exists in the system? -[ ] Cleanup headers. I propose to rearrange the files in a way to reflect the - organisation of the source tree. This requires changing the include paths - in nearly all files, therefore a merge window for this change must be - opened and merge in of all other topic branches must happen before. - Week 23 or 42 issue? csc, 21.03.2008 19:36:06 -[ ] Merge similiar information into a single common and a single arch dependant - file. E.g. all those general typedefs should be located in include types.h - and arch/asm/types.h. csc 21.03.2008 19:38:57 -[ ] Get rid of the current linux include dir. It should only contain information - required to boot linux. csc 21.03.2008 19:39:02 -[ ] Unify source headers to show up the GPL lic stuff followed by a doxygen file - description. -[ ] Enhance and complete doxygen comments. -[ ] Eliminate all #ifdef CONFIG_??? in C code. Disabled APIs should be defined - as empty macros, so that code is removed by the compiler, not the - preprocessor. - The #ifdefs should be located in their related header files only. -[ ] Create an example board, which implements all functions stubs required - to compile a full barebox build. Functions are just stubs containing a - panic() call - Real code must be filled in accordingly. - Can be copied as starting point for a new target board. -[ ] Add generic PCI bios code and a PCI bus driver model. The driver should - be configured by an appropriate platformconfig. Detected PCI buses and - devices should be represented as a hierarchical tree in /dev -[ ] Work out, how to mount driver on PCI devices. The mechanism should be - transparent to the driver code. - -DONE ----- - -[x] Rename vmlinux -> barebox -[x] Implement current work directory -[x] ARCH=linux should catch ctrl-c -[x] Implement 'rm' -[x] the mount command currently does not accept a full path (i.e. /dev/nor0) but - only a device id string (nor0). This sucks. -[x] FS support is not optional eventhough the Kconfig system claims it. -[x] barebox used to have support for different consoles. The old code was huge and - ineffective, so I removed it. Reimplement it using the driver model. -[x] Mount without options should show mounted filesystems -[x] Add/fix help texts for commands -[x] mw is broken. Add common option parsing for mm/md -[x] Implement a info command for malloced space. Use it to find memory holes. -[x] patch hush.c so that you can get/set device parameters with dev.param= and remove - get/set applets -[x] rsc: switching on CONFIG_AUTO_COMPLETE fails, because env_complete() - isn't there -[x] The header files in include/asm-linux/ are i386 specific. Make it work on - your i-Book (bigendian...) -[x] Globbing support? Might be too expensive, but on the other hand, if you - have the space, why not? -[x] Implement protect/unprotect support for cfi devices. -[x] Implement a command 'countdown' or similar. It should delay the boot - process and interrupt it if a certain string is received. The string could - be any key, ctrl-c or a certain string. Maybe like this: - countdown -m msg -t timeout -x [ctrl-c|anykey|string] - If done, remove the corresponding stuff from common/main.c -[X] Board support should go to arch/*/boards/* -[X] distclean doesn't work without a config -- 2.11.0 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox