Signed-off-by: Roland Hieber <rohieb@xxxxxxxxxxx> --- Documentation/boards/imx/phytec-phycore-i.mx31.rst | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/Documentation/boards/imx/phytec-phycore-i.mx31.rst b/Documentation/boards/imx/phytec-phycore-i.mx31.rst index 6c05bcdfdc..d9a981b998 100644 --- a/Documentation/boards/imx/phytec-phycore-i.mx31.rst +++ b/Documentation/boards/imx/phytec-phycore-i.mx31.rst @@ -23,8 +23,8 @@ Supported baseboards Supported baseboards are: * Silica / Phytec PCM-970 via phyMAP-i.MX31, PMA-001 -How to get barebox for 'Phytec's phyCORE-i.MX31' ------------------------------------------------- +How to get barebox for Phytec's phyCORE-i.MX31 +---------------------------------------------- Using the default configuration:: @@ -34,8 +34,8 @@ Build the binary image:: make ARCH=arm CROSS_COMPILE=armv5compiler -**NOTE:** replace ''armv5compiler'' with your ARM v5 cross compiler, - e.g.: ''arm-1136jfs-linux-gnueabi-'' +.. note:: replace ``armv5compiler`` with your ARM v5 cross compiler prefix, + e.g.: ``arm-1136jfs-linux-gnueabi-`` The resulting binary image to be flashed will be ``barebox.bin``, whereas the file named just ``barebox`` is an ELF executable for ARM. -- 2.17.1 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
