Signed-off-by: Roland Hieber <rohieb@xxxxxxxxxxx> --- Documentation/boards/imx/amazon-kindle-3.rst | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/Documentation/boards/imx/amazon-kindle-3.rst b/Documentation/boards/imx/amazon-kindle-3.rst index 50592f2cb9..dffb7efb2d 100644 --- a/Documentation/boards/imx/amazon-kindle-3.rst +++ b/Documentation/boards/imx/amazon-kindle-3.rst @@ -14,7 +14,10 @@ vendor modified u-boot imximage. To upload and run a new bootloader the device can be put into USB-downloader mode by the SOC microcode when Vol+ is pressed during startup. A new USB device "SE Blank RINGO" should appear, barebox may be uploaded using -$ scripts/imx/imx-usb-loader barebox.imximg + +:: + + $ scripts/imx/imx-usb-loader barebox.imximg Note: a USB serial ACM console will be launched by a barebox init script when the cursor select key is pressed during startup (e.g. before running @@ -23,6 +26,7 @@ imx-usb-loader) Barebox may be used as drop-in replacement for the shipped bootloader. When installing the barebox imximg on the eMMC take care not to overwrite the partition table and vendor supplied serial numbers stored on the eMMC. -e.g. just write the imx-header and the application section: -memcpy -b -s barebox.imximg -d /dev/disk0.imx_header 1024 0 1024 -memcpy -b -s barebox.imximg -d /dev/disk0.self 4096 0 195584 +e.g. just write the imx-header and the application section:: + + memcpy -b -s barebox.imximg -d /dev/disk0.imx_header 1024 0 1024 + memcpy -b -s barebox.imximg -d /dev/disk0.self 4096 0 195584 -- 2.17.1 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
