Signed-off-by: Pascal Vizeli <pvizeli@xxxxxxxxxx> --- Documentation/user/devicetree.rst | 101 ++++++++- arch/sandbox/dts/Makefile | 5 +- arch/sandbox/dts/sandbox.dts | 6 + commands/oftree.c | 65 +++++- drivers/of/Kconfig | 6 + drivers/of/Makefile | 1 + drivers/of/overlay.c | 234 ++++++++++++++++++++ drivers/of/resolver.c | 346 ++++++++++++++++++++++++++++++ include/of.h | 71 ++++++ scripts/Makefile.lib | 5 +- 10 files changed, 831 insertions(+), 9 deletions(-) create mode 100644 drivers/of/overlay.c create mode 100644 drivers/of/resolver.c diff --git a/Documentation/user/devicetree.rst b/Documentation/user/devicetree.rst index 17934d86e..b2220997d 100644 --- a/Documentation/user/devicetree.rst +++ b/Documentation/user/devicetree.rst @@ -21,7 +21,7 @@ The internal devicetree ----------------------- The devicetree consulted by barebox plays a special role. It is referred to -as the "internal devicetree." The barebox devicetree commands work on this +as the "internal devicetree". The barebox devicetree commands work on this devicetree. The devicetree source (DTS) files are kept in sync with the kernel DTS files. As the FDT files are meant to be backward compatible, it should always be possible to start a kernel with the barebox internal devicetree. However, since the barebox @@ -83,3 +83,102 @@ you can exchange the internal devicetree during runtime using the oftree -f oftree -l /new/dtb + +Devicetree overlays +------------------- + +Since version 3.19, the Linux kernel supports applying "devicetree overlays" to +its loaded device tree. This can be used to inform the kernel about additional +non-discoverable devices after the system has booted, which is useful for modular +boards and FPGAs. The details of the overlay format are specified in the Linux +`kernel documentation <https://www.kernel.org/doc/Documentation/devicetree/overlay-notes.txt>`_ +and an updated DTC is required to compile the overlays. + +The use cases for overlays in barebox are a bit different: + +* some of the modular devices are needed to boot Linux to userspace, but barebox + can detect which module variant is connected +* one of several parallel or LVDS displays (which use timing data from devicetree) + can be connected to the SoC and should be used for boot messages +* a generic Linux (distribution) kernel should be booted on a modular + system and support additional hardware on modules + +barebox supports applying overlays in the internal devicetree was well using the +:ref:`command_oftree` command with option ``-o``: + +.. code-block:: sh + + $ ./barebox -d arch/sandbox/dts/sandbox.dtb -i arch/sandbox/dts/sandbox-overlay.dtbo + add fd0 backed by file arch/sandbox/dts/sandbox-overlay.dtbo + + barebox 2015.02.0 #26 Wed Mar 4 09:41:19 CET 2015 + ... + barebox@barebox sandbox:/ of_dump + ... + dummy@0 { + status = "disabled"; + linux,phandle = <0x1>; + phandle = <0x1>; + }; + dummy@1 { + status = "disabled"; + linux,phandle = <0x2>; + phandle = <0x2>; + }; + __symbols__ { + dummy0 = "/dummy@0"; + dummy1 = "/dummy@1"; + }; + ... + barebox@barebox sandbox:/ of_dump -f /dev/fd0 + { + fragment@0 { + target = <0xdeadbeef>; + __overlay__ { + status = "okay"; + child { + compatible = "barebox,dummy"; + }; + }; + }; + fragment@1 { + target = <0xdeadbeef>; + __overlay__ { + status = "okay"; + child { + compatible = "barebox,dummy"; + }; + }; + }; + __fixups__ { + dummy0 = "/fragment@0:target:0"; + dummy1 = "/fragment@1:target:0"; + }; + }; + barebox@barebox sandbox:/ oftree -o /dev/fd0 + barebox@barebox sandbox:/ of_dump + ... + dummy@0 { + linux,phandle = <0x1>; + phandle = <0x1>; + status = "okay"; + child { + compatible = "barebox,dummy"; + }; + }; + dummy@1 { + linux,phandle = <0x2>; + phandle = <0x2>; + status = "okay"; + child { + compatible = "barebox,dummy"; + }; + }; + __symbols__ { + dummy0 = "/dummy@0"; + dummy1 = "/dummy@1"; + }; + ... + +If you need to use a different base devicetree instead of the one compiled into +barebox, it needs to be replaced as described in the previous section. diff --git a/arch/sandbox/dts/Makefile b/arch/sandbox/dts/Makefile index 6f6838857..ede219e6f 100644 --- a/arch/sandbox/dts/Makefile +++ b/arch/sandbox/dts/Makefile @@ -1,6 +1,7 @@ ifeq ($(CONFIG_OFTREE),y) dtb-y += \ - sandbox.dtb + sandbox.dtb \ + sandbox-overlay.dtbo endif # just to build a built-in.o. Otherwise compilation fails when no devicetree is @@ -8,4 +9,4 @@ endif obj- += dummy.o always := $(dtb-y) -clean-files := *.dtb *.dtb.S .*.dtc .*.pre .*.dts +clean-files := *.dtb *.dtb.S .*.dtc .*.pre .*.dts *.dtbo diff --git a/arch/sandbox/dts/sandbox.dts b/arch/sandbox/dts/sandbox.dts index 2595aa13f..1b99a4960 100644 --- a/arch/sandbox/dts/sandbox.dts +++ b/arch/sandbox/dts/sandbox.dts @@ -3,5 +3,11 @@ #include "skeleton.dtsi" / { + dummy0: dummy@0 { + status = "disabled"; + }; + dummy1: dummy@1 { + status = "disabled"; + }; }; diff --git a/commands/oftree.c b/commands/oftree.c index 8a47c0be5..e0624ad34 100644 --- a/commands/oftree.c +++ b/commands/oftree.c @@ -2,6 +2,7 @@ * oftree.c - device tree command support * * Copyright (c) 2011 Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>, Pengutronix + * Copyright (C) 2015 Pengutronix, Jan Luebbe <jlu@xxxxxxxxxxxxxx> * * based on U-Boot code by: * @@ -48,11 +49,14 @@ static int do_oftree(int argc, char *argv[]) int probe = 0; char *load = NULL; char *save = NULL; + char *overlay = NULL; int free_of = 0; int ret; struct device_node *root; + int ovinfo_cnt; + struct of_overlay_info *ovinfo; - while ((opt = getopt(argc, argv, "pfl:s:")) > 0) { + while ((opt = getopt(argc, argv, "pfl:o:s:")) > 0) { switch (opt) { case 'l': load = optarg; @@ -68,6 +72,9 @@ static int do_oftree(int argc, char *argv[]) case 'f': free_of = 1; break; + case 'o': + overlay = optarg; + break; case 's': save = optarg; break; @@ -84,7 +91,7 @@ static int do_oftree(int argc, char *argv[]) return 0; } - if (!probe && !load && !save) + if (!probe && !load && !save && !overlay) return COMMAND_ERROR_USAGE; if (save) { @@ -123,6 +130,53 @@ static int do_oftree(int argc, char *argv[]) } } + if (IS_ENABLED(CONFIG_OFTREE_OVERLAY) && overlay) { + struct device_node *ov; + + root = of_get_root_node(); + if (!root) { + printf("no oftree loaded\n"); + goto out; + } + + fdt = read_file(overlay, &size); + if (!fdt) { + printf("unable to read %s\n", overlay); + return 1; + } + + ov = of_unflatten_dtb(fdt); + free(fdt); + + if (IS_ERR(ov)) { + printf("parse oftree: %s\n", strerror(-ret)); + return PTR_ERR(ov); + } + + ret = of_resolve(ov); + if (ret) { + printf("resolve oftree overlay: %s\n", strerror(-ret)); + of_delete_node(ov); + goto out; + } + + ret = of_build_overlay_info(ov, &ovinfo_cnt, &ovinfo); + if (ret) { + printf("prepare oftree overlay: %s\n", strerror(-ret)); + of_delete_node(ov); + goto out; + } + + ret = of_overlay(ovinfo_cnt, ovinfo); + if (ret) { + printf("apply oftree overlay: %s\n", strerror(-ret)); + of_delete_node(ov); + goto out; + } + + of_delete_node(ov); + } + if (probe) { ret = of_probe(); if (ret) @@ -137,8 +191,9 @@ out: BAREBOX_CMD_HELP_START(oftree) BAREBOX_CMD_HELP_TEXT("Options:") -BAREBOX_CMD_HELP_OPT ("-l <DTB>", "Load <DTB> to internal devicetree\n") -BAREBOX_CMD_HELP_OPT ("-s <DTB>", "save internal devicetree to <DTB>\n") +BAREBOX_CMD_HELP_OPT ("-l <DTB>", "load <DTB> to internal devicetree") +BAREBOX_CMD_HELP_OPT ("-s <DTB>", "save internal devicetree to <DTB>") +BAREBOX_CMD_HELP_OPT ("-o <DTBO>", "apply overlay <DTBO> to internal devicetree") BAREBOX_CMD_HELP_OPT ("-p", "probe devices from stored device tree") BAREBOX_CMD_HELP_OPT ("-f", "free stored device tree") BAREBOX_CMD_HELP_END @@ -146,7 +201,7 @@ BAREBOX_CMD_HELP_END BAREBOX_CMD_START(oftree) .cmd = do_oftree, BAREBOX_CMD_DESC("handle device trees") - BAREBOX_CMD_OPTS("[-lspf]") + BAREBOX_CMD_OPTS("[-lsopf]") BAREBOX_CMD_GROUP(CMD_GRP_MISC) BAREBOX_CMD_HELP(cmd_oftree_help) BAREBOX_CMD_END diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig index a1fac0e61..d90bd9c6b 100644 --- a/drivers/of/Kconfig +++ b/drivers/of/Kconfig @@ -15,6 +15,12 @@ config OFDEVICE select DTC bool "Enable probing of devices from the devicetree" +config OFTREE_OVERLAY + bool "Enable support for devicetree overlays" + depends on OFTREE + help + Allows you to modify the live tree using overlays. + config OF_ADDRESS_PCI bool diff --git a/drivers/of/Makefile b/drivers/of/Makefile index ec4387006..323543461 100644 --- a/drivers/of/Makefile +++ b/drivers/of/Makefile @@ -6,3 +6,4 @@ obj-y += partition.o obj-y += of_net.o obj-$(CONFIG_MTD) += of_mtd.o obj-$(CONFIG_OF_BAREBOX_DRIVERS) += barebox.o +obj-$(CONFIG_OFTREE_OVERLAY) += resolver.o overlay.o diff --git a/drivers/of/overlay.c b/drivers/of/overlay.c new file mode 100644 index 000000000..a711a353f --- /dev/null +++ b/drivers/of/overlay.c @@ -0,0 +1,234 @@ +/* + * Functions for working with device tree overlays + * + * Copyright (C) 2012 Pantelis Antoniou <panto@xxxxxxxxxxxxxxxxxxxxxxx> + * Copyright (C) 2012 Texas Instruments Inc. + * Copyright (C) 2015 Pengutronix, Jan Luebbe <jlu@xxxxxxxxxxxxxx> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + */ + +#include <common.h> +#include <of.h> +#include <errno.h> +#include <malloc.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/ctype.h> +#include <linux/err.h> + +/** + * Apply a single overlay node recursively. + * + * All the property notifiers are appropriately called. + * Note that the in case of an error the target node is left + * in a inconsistent state. Error recovery should be performed + * by recording the modification using the of notifiers. + */ +static int of_overlay_apply_one(struct device_node *target, + const struct device_node *overlay) +{ + struct device_node *child, *tchild; + struct property *prop; + int ret; + + /* sanity checks */ + if (target == NULL || overlay == NULL) + return -EINVAL; + + for_each_property_of_node(overlay, prop) { + /* don't touch, 'name' */ + if (of_prop_cmp(prop->name, "name") == 0) + continue; + + of_delete_property(of_find_property(target, prop->name, NULL)); + + if (of_new_property(target, prop->name, prop->value, prop->length) == NULL) + return -ENOMEM; + } + + for_each_child_of_node(overlay, child) { + tchild = of_get_child_by_name(target, child->name); + if (tchild != NULL) { + /* apply overlay recursively */ + ret = of_overlay_apply_one(tchild, child); + + if (ret != 0) + return ret; + } else { + /* create new child */ + tchild = of_new_node(target, child->name); + if (tchild == NULL) + return -ENOMEM; + + /* apply the overlay */ + ret = of_overlay_apply_one(tchild, child); + if (ret != 0) { + of_delete_node(tchild); + return ret; + } + } + } + + return 0; +} + +/** + * of_overlay - Apply @count overlays pointed at by @ovinfo_tab + * @count: Number of of_overlay_info's + * @ovinfo_tab: Array of overlay_info's to apply + * + * Applies the overlays given, while handling all error conditions + * appropriately. Either the operation succeeds, or if it fails the + * live tree is reverted to the state before the attempt. + * Returns 0, or an error if the overlay attempt failed. + */ +int of_overlay(int count, struct of_overlay_info *ovinfo_tab) +{ + struct of_overlay_info *ovinfo; + int i, err; + + if (!ovinfo_tab) + return -EINVAL; + + for (i = 0; i < count; i++) { + ovinfo = &ovinfo_tab[i]; + err = of_overlay_apply_one(ovinfo->target, ovinfo->overlay); + if (err != 0) { + pr_err("%s: overlay failed '%s'\n", + __func__, ovinfo->target->full_name); + goto err_fail; + } + } + + return 0; + +err_fail: + return err; +} + +/** + * of_fill_overlay_info - Fill an overlay info structure + * @info_node: Device node containing the overlay + * @ovinfo: Pointer to the overlay info structure to fill + * + * Fills an overlay info structure with the overlay information + * from a device node. This device node must have a target property + * which contains a phandle of the overlay target node, and an + * __overlay__ child node which has the overlay contents. + * Both ovinfo->target & ovinfo->overlay have their references taken. + * + * Returns 0 on success, or a negative error value. + */ +int of_fill_overlay_info(struct device_node *info_node, + struct of_overlay_info *ovinfo) +{ + const char *target_path; + u32 target_handle; + int ret; + + if (!info_node || !ovinfo) + return -EINVAL; + + ret = of_property_read_u32(info_node, "target", &target_handle); + if (ret == 0) { + ovinfo->target = of_find_node_by_phandle(target_handle); + } else { + ret = of_property_read_string(info_node, "target-path", &target_path); + if (ret == 0) { + ovinfo->target = of_find_node_by_path(target_path); + } + } + if (ovinfo->target == NULL) + goto err_fail; + + ovinfo->overlay = of_get_child_by_name(info_node, "__overlay__"); + if (ovinfo->overlay == NULL) + goto err_fail; + + return 0; + +err_fail: + memset(ovinfo, 0, sizeof(*ovinfo)); + return -EINVAL; +} + +/** + * of_build_overlay_info - Build an overlay info array + * @tree: Device node containing all the overlays + * @cntp: Pointer to where the overlay info count will be help + * @ovinfop: Pointer to the pointer of an overlay info structure. + * + * Helper function that given a tree containing overlay information, + * allocates and builds an overlay info array containing it, ready + * for use using of_overlay. + * + * Returns 0 on success with the @cntp @ovinfop pointers valid, + * while on error a negative error value is returned. + */ +int of_build_overlay_info(struct device_node *tree, + int *cntp, struct of_overlay_info **ovinfop) +{ + struct device_node *node; + struct of_overlay_info *ovinfo; + int cnt, err; + + if (tree == NULL || cntp == NULL || ovinfop == NULL) + return -EINVAL; + + /* worst case; every child is a node */ + cnt = 0; + for_each_child_of_node(tree, node) + cnt++; + + ovinfo = kzalloc(cnt * sizeof(*ovinfo), GFP_KERNEL); + if (ovinfo == NULL) + return -ENOMEM; + + cnt = 0; + for_each_child_of_node(tree, node) { + memset(&ovinfo[cnt], 0, sizeof(*ovinfo)); + err = of_fill_overlay_info(node, &ovinfo[cnt]); + if (err == 0) + cnt++; + } + + /* if nothing filled, return error */ + if (cnt == 0) { + kfree(ovinfo); + return -ENODEV; + } + + *cntp = cnt; + *ovinfop = ovinfo; + + return 0; +} + +/** + * of_free_overlay_info - Free an overlay info array + * @count: Number of of_overlay_info's + * @ovinfo_tab: Array of overlay_info's to free + * + * Releases the memory of a previously allocate ovinfo array + * by of_build_overlay_info. + * Returns 0, or an error if the arguments are bogus. + */ +int of_free_overlay_info(int count, struct of_overlay_info *ovinfo_tab) +{ + struct of_overlay_info *ovinfo; + int i; + + if (!ovinfo_tab || count < 0) + return -EINVAL; + + /* do it in reverse */ + for (i = count - 1; i >= 0; i--) + ovinfo = &ovinfo_tab[i]; + + kfree(ovinfo_tab); + + return 0; +} diff --git a/drivers/of/resolver.c b/drivers/of/resolver.c new file mode 100644 index 000000000..62476093c --- /dev/null +++ b/drivers/of/resolver.c @@ -0,0 +1,346 @@ +/* + * Functions for dealing with DT resolution + * + * Copyright (C) 2012 Pantelis Antoniou <panto@xxxxxxxxxxxxxxxxxxxxxxx> + * Copyright (C) 2012 Texas Instruments Inc. + * Copyright (C) 2015 Pengutronix, Jan Luebbe <jlu@xxxxxxxxxxxxxx> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + */ + +#include <common.h> +#include <of.h> +#include <errno.h> +#include <malloc.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/ctype.h> +#include <linux/string.h> + +/** + * Adjust a subtree's phandle values by a given delta. + * Makes sure not to just adjust the device node's phandle value, + * but modify the phandle properties values as well. + */ +static void of_adjust_tree_phandles(struct device_node *node, + int phandle_delta) +{ + struct device_node *child; + struct property *prop; + phandle phandle; + + /* first adjust the node's phandle direct value */ + if (node->phandle != 0 && node->phandle != OF_PHANDLE_ILLEGAL) + node->phandle += phandle_delta; + + /* now adjust phandle & linux,phandle values */ + for_each_property_of_node(node, prop) { + /* only look for these two */ + if (of_prop_cmp(prop->name, "phandle") != 0 && + of_prop_cmp(prop->name, "linux,phandle") != 0) + continue; + + /* must be big enough */ + if (prop->length < 4) + continue; + + /* read phandle value */ + phandle = be32_to_cpu(*(uint32_t *)prop->value); + if (phandle == OF_PHANDLE_ILLEGAL) /* unresolved */ + continue; + + /* adjust */ + *(uint32_t *)prop->value = cpu_to_be32(node->phandle); + } + + /* now do the children recursively */ + for_each_child_of_node(node, child) + of_adjust_tree_phandles(child, phandle_delta); +} + +/** + * Adjust the local phandle references by the given phandle delta. + * Assumes the existances of a __local_fixups__ node at the root + * of the tree. Does not take any devtree locks so make sure you + * call this on a tree which is at the detached state. + */ +static int of_adjust_tree_phandle_references(struct device_node *node, + int phandle_delta) +{ + phandle phandle; + struct device_node *refnode, *child; + struct property *rprop, *sprop; + char *propval, *propcur, *propend, *nodestr, *propstr, *s; + int offset, propcurlen; + int err; + bool found = false; + + /* locate the symbols & fixups nodes on resolve */ + for_each_child_of_node(node, child) + if (of_node_cmp(child->name, "__local_fixups__") == 0) { + found = true; + break; + } + + /* no local fixups */ + if (!found) + return 0; + + /* find the local fixups property */ + for_each_property_of_node(child, rprop) { + /* skip properties added automatically */ + if (of_prop_cmp(rprop->name, "name") == 0) + continue; + + /* make a copy */ + propval = kmalloc(rprop->length, GFP_KERNEL); + if (propval == NULL) { + pr_err("%s: Could not copy value of '%s'\n", + __func__, rprop->name); + return -ENOMEM; + } + memcpy(propval, rprop->value, rprop->length); + + propend = propval + rprop->length; + for (propcur = propval; propcur < propend; + propcur += propcurlen + 1) { + + propcurlen = strlen(propcur); + + nodestr = propcur; + s = strchr(propcur, ':'); + if (s == NULL) { + pr_err("%s: Illegal symbol entry '%s' (1)\n", + __func__, propcur); + err = -EINVAL; + goto err_fail; + } + *s++ = '\0'; + + propstr = s; + s = strchr(s, ':'); + if (s == NULL) { + pr_err("%s: Illegal symbol entry '%s' (2)\n", + __func__, (char *)rprop->value); + err = -EINVAL; + goto err_fail; + } + + *s++ = '\0'; + offset = simple_strtoul(s, NULL, 10); + + /* look into the resolve node for the full path */ + refnode = of_find_node_by_path_from(node, nodestr); + if (refnode == NULL) { + pr_warn("%s: Could not find refnode '%s'\n", + __func__, (char *)rprop->value); + continue; + } + + /* now find the property */ + found = false; + for_each_property_of_node(refnode, sprop) + if (of_prop_cmp(sprop->name, propstr) == 0) { + found = true; + break; + } + + if (!found) { + pr_err("%s: Could not find property '%s'\n", + __func__, (char *)rprop->value); + err = -ENOENT; + goto err_fail; + } + + phandle = be32_to_cpu(*(uint32_t *) + (sprop->value + offset)); + *(uint32_t *)(sprop->value + offset) = + cpu_to_be32(phandle + phandle_delta); + } + + kfree(propval); + } + + return 0; + +err_fail: + kfree(propval); + return err; +} + +/** + * of_resolve - Resolve the given node against the live tree. + * + * @resolve: Node to resolve + * + * Perform dynamic Device Tree resolution against the live tree + * to the given node to resolve. This depends on the live tree + * having a __symbols__ node, and the resolve node the __fixups__ & + * __local_fixups__ nodes (if needed). + * The result of the operation is a resolve node that it's contents + * are fit to be inserted or operate upon the live tree. + * Returns 0 on success or a negative error value on error. + */ +int of_resolve(struct device_node *resolve) +{ + struct device_node *child, *refnode; + struct device_node *root_sym, *resolve_sym, *resolve_fix; + struct property *rprop, *sprop; + const char *refpath; + char *propval, *propcur, *propend, *nodestr, *propstr, *s; + int offset, propcurlen; + phandle phandle, phandle_delta; + int err; + bool found = false; + + /* the resolve node must exist */ + if (resolve == NULL) { + return -EINVAL; + } + + /* first we need to adjust the phandles */ + phandle_delta = of_get_tree_max_phandle(NULL) + 1; + of_adjust_tree_phandles(resolve, phandle_delta); + err = of_adjust_tree_phandle_references(resolve, phandle_delta); + if (err != 0) + return err; + + root_sym = NULL; + resolve_sym = NULL; + resolve_fix = NULL; + + /* this may fail (if no fixups are required) */ + root_sym = of_find_node_by_path("/__symbols__"); + + /* locate the symbols & fixups nodes on resolve */ + for_each_child_of_node(resolve, child) { + if (resolve_sym == NULL && + of_node_cmp(child->name, "__symbols__") == 0) + resolve_sym = child; + + if (resolve_fix == NULL && + of_node_cmp(child->name, "__fixups__") == 0) + resolve_fix = child; + + /* both found, don't bother anymore */ + if (resolve_sym != NULL && resolve_fix != NULL) + break; + } + + /* we do allow for the case where no fixups are needed */ + if (resolve_fix == NULL) + goto merge_sym; + + /* we need to fixup, but no root symbols... */ + if (root_sym == NULL) + return -EINVAL; + + for_each_property_of_node(resolve_fix, rprop) { + /* skip properties added automatically */ + if (of_prop_cmp(rprop->name, "name") == 0) + continue; + + err = of_property_read_string(root_sym, + rprop->name, &refpath); + if (err != 0) { + pr_err("%s: Could not find symbol '%s'\n", + __func__, rprop->name); + goto err_fail; + } + + refnode = of_find_node_by_path(refpath); + if (refnode == NULL) { + pr_err("%s: Could not find node by path '%s'\n", + __func__, refpath); + err = -ENOENT; + goto err_fail; + } + + phandle = refnode->phandle; + + pr_debug("%s: %s phandle is 0x%08x\n", + __func__, rprop->name, phandle); + + /* make a copy */ + propval = kmalloc(rprop->length, GFP_KERNEL); + if (propval == NULL) { + pr_err("%s: Could not copy value of '%s'\n", + __func__, rprop->name); + err = -ENOMEM; + goto err_fail; + } + + memcpy(propval, rprop->value, rprop->length); + + propend = propval + rprop->length; + for (propcur = propval; propcur < propend; + propcur += propcurlen + 1) { + propcurlen = strlen(propcur); + + nodestr = propcur; + s = strchr(propcur, ':'); + if (s == NULL) { + pr_err("%s: Illegal symbol " + "entry '%s' (1)\n", + __func__, (char *)rprop->value); + kfree(propval); + err = -EINVAL; + goto err_fail; + } + *s++ = '\0'; + + propstr = s; + s = strchr(s, ':'); + if (s == NULL) { + pr_err("%s: Illegal symbol " + "entry '%s' (2)\n", + __func__, (char *)rprop->value); + kfree(propval); + err = -EINVAL; + goto err_fail; + } + + *s++ = '\0'; + offset = simple_strtoul(s, NULL, 10); + + /* look into the resolve node for the full path */ + refnode = of_find_node_by_path_from(resolve, nodestr); + if (refnode == NULL) { + pr_err("%s: Could not find refnode '%s'\n", + __func__, (char *)rprop->value); + kfree(propval); + err = -ENOENT; + goto err_fail; + } + + /* now find the property */ + found = false; + for_each_property_of_node(refnode, sprop) + if (of_prop_cmp(sprop->name, propstr) == 0) { + found = true; + break; + } + + if (!found) { + pr_err("%s: Could not find property '%s'\n", + __func__, (char *)rprop->value); + kfree(propval); + err = -ENOENT; + goto err_fail; + } + + *(uint32_t *)(sprop->value + offset) = + cpu_to_be32(phandle); + } + + kfree(propval); + } + +merge_sym: + return 0; + +err_fail: + return err; +} diff --git a/include/of.h b/include/of.h index fec51bb94..91476ae47 100644 --- a/include/of.h +++ b/include/of.h @@ -730,6 +730,8 @@ static inline struct device_node *of_find_matching_node( #define for_each_available_child_of_node(parent, child) \ for (child = of_get_next_available_child(parent, NULL); child != NULL; \ child = of_get_next_available_child(parent, child)) +#define for_each_property_of_node(dn, pp) \ + list_for_each_entry(pp, &dn->properties, list) /** * of_property_read_bool - Findfrom a property @@ -850,4 +852,73 @@ static inline struct device_node *of_find_root_node(struct device_node *node) return node; } + +/* illegal phandle value (set when unresolved) */ +#define OF_PHANDLE_ILLEGAL 0xdeadbeef + +#ifdef CONFIG_OFTREE_OVERLAY + +extern int of_resolve(struct device_node *resolve); + +#else + +static inline int of_resolve(struct device_node *resolve) +{ + return -ENOSYS; +} + +#endif + +/** + * Overlay support + */ + +/** + * struct of_overlay_info - Holds a single overlay info + * @target: target of the overlay operation + * @overlay: pointer to the overlay contents node + * + * Holds a single overlay state. + */ +struct of_overlay_info { + struct device_node *target; + struct device_node *overlay; +}; + +#ifdef CONFIG_OFTREE_OVERLAY + +extern int of_overlay(int count, struct of_overlay_info *ovinfo_tab); + +extern int of_fill_overlay_info(struct device_node *info_node, + struct of_overlay_info *ovinfo); +extern int of_build_overlay_info(struct device_node *tree, + int *cntp, struct of_overlay_info **ovinfop); +extern int of_free_overlay_info(int cnt, struct of_overlay_info *ovinfo); + +#else + +static inline int of_overlay(int count, struct of_overlay_info *ovinfo_tab) +{ + return -ENOSYS; +} + +static inline int of_fill_overlay_info(struct device_node *info_node, + struct of_overlay_info *ovinfo) +{ + return -ENOSYS; +} + +static inline int of_build_overlay_info(struct device_node *tree, + int *cntp, struct of_overlay_info **ovinfop) +{ + return -ENOSYS; +} + +static inline int of_free_overlay_info(int cnt, struct of_overlay_info *ovinfo) +{ + return -ENOSYS; +} + +#endif + #endif /* __OF_H */ diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib index 272b5981e..e7cea55c4 100644 --- a/scripts/Makefile.lib +++ b/scripts/Makefile.lib @@ -261,7 +261,7 @@ $(obj)/%.dtb.S: $(obj)/%.dtb $(srctree)/scripts/gen-dtb-s FORCE quiet_cmd_dtc = DTC $@ cmd_dtc = $(CPP) $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \ - $(objtree)/scripts/dtc/dtc -O dtb -o $@ -b 0 \ + $(objtree)/scripts/dtc/dtc -@ -O dtb -o $@ -b 0 \ -i $(srctree)/arch/$(SRCARCH)/dts $(DTC_FLAGS) \ -i $(srctree)/dts/src/$(SRCARCH) \ -d $(depfile).dtc $(dtc-tmp) ; \ @@ -270,6 +270,9 @@ cmd_dtc = $(CPP) $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \ $(obj)/%.dtb: $(src)/%.dts FORCE $(call if_changed_dep,dtc) +$(obj)/%.dtbo: $(src)/%.dtso FORCE + $(call if_changed_dep,dtc) + dtc-tmp = $(subst $(comma),_,$(dot-target).dts) obj-y += $(patsubst %,%.bbenv$(DEFAULT_COMPRESSION_SUFFIX).o,$(bbenv-y)) -- 2.17.0 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox