KSEG1 constant is defined for 32 bit MIPS only. Use CKSEG1 which is defined for
both MIPS32 and MIPS64.
Signed-off-by: Peter Mamonov <pmamonov@xxxxxxxxx>
---
arch/mips/boot/dtb.c | 4 ++--
arch/mips/lib/c-r4k.c | 8 ++++----
2 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/mips/boot/dtb.c b/arch/mips/boot/dtb.c
index e7633a5af..3f7f46641 100644
--- a/arch/mips/boot/dtb.c
+++ b/arch/mips/boot/dtb.c
@@ -30,10 +30,10 @@ void of_add_memory_bank(struct device_node *node, bool dump, int r,
if (IS_ENABLED(CONFIG_MMU)) {
sprintf(str, "kseg0_ram%d", r);
- barebox_add_memory_bank(str, KSEG0 | base, size);
+ barebox_add_memory_bank(str, CKSEG0 | base, size);
} else {
sprintf(str, "kseg1_ram%d", r);
- barebox_add_memory_bank(str, KSEG1 | base, size);
+ barebox_add_memory_bank(str, CKSEG1 | base, size);
}
if (dump)
diff --git a/arch/mips/lib/c-r4k.c b/arch/mips/lib/c-r4k.c
index 150205840..cb0544a53 100644
--- a/arch/mips/lib/c-r4k.c
+++ b/arch/mips/lib/c-r4k.c
@@ -58,14 +58,14 @@ void flush_cache_all(void)
dcache_size = c->dcache.waysize * c->dcache.ways;
lsize = c->dcache.linesz;
- aend = (KSEG0 + dcache_size - 1) & ~(lsize - 1);
- for (addr = KSEG0; addr <= aend; addr += lsize)
+ aend = (CKSEG0 + dcache_size - 1) & ~(lsize - 1);
+ for (addr = CKSEG0; addr <= aend; addr += lsize)
cache_op(Index_Writeback_Inv_D, addr);
icache_size = c->icache.waysize * c->icache.ways;
lsize = c->icache.linesz;
- aend = (KSEG0 + icache_size - 1) & ~(lsize - 1);
- for (addr = KSEG0; addr <= aend; addr += lsize)
+ aend = (CKSEG0 + icache_size - 1) & ~(lsize - 1);
+ for (addr = CKSEG0; addr <= aend; addr += lsize)
cache_op(Index_Invalidate_I, addr);
/* secondatory cache skipped */
--
2.17.0
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
