On Thu, May 10, 2018 at 06:20:18PM +0300, Nikita Yushchenko wrote:
> This implements support for gpio-gate-clock device tree nodes, that
> define clocks that can be enabled or disabled via GPIO line.
>
> Signed-off-by: Nikita Yushchenko <nikita.yoush@xxxxxxxxxxxxxxxxxx>
> ---
> drivers/clk/Makefile | 2 +-
> drivers/clk/clk-gpio.c | 130 +++++++++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 131 insertions(+), 1 deletion(-)
> create mode 100644 drivers/clk/clk-gpio.c
Applied, thanks
Sascha
>
> diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
> index 55ac9535a..cd4026c94 100644
> --- a/drivers/clk/Makefile
> +++ b/drivers/clk/Makefile
> @@ -1,7 +1,7 @@
> obj-$(CONFIG_COMMON_CLK) += clk.o clk-fixed.o clk-divider.o clk-fixed-factor.o \
> clk-mux.o clk-gate.o clk-composite.o \
> clk-fractional-divider.o clk-conf.o \
> - clk-gate-shared.o
> + clk-gate-shared.o clk-gpio.o
> obj-$(CONFIG_CLKDEV_LOOKUP) += clkdev.o
>
> obj-$(CONFIG_ARCH_MVEBU) += mvebu/
> diff --git a/drivers/clk/clk-gpio.c b/drivers/clk/clk-gpio.c
> new file mode 100644
> index 000000000..352c85dfe
> --- /dev/null
> +++ b/drivers/clk/clk-gpio.c
> @@ -0,0 +1,130 @@
> +/*
> + * clk-gpio.c - clock that can be enabled and disabled via GPIO output
> + * Based on Linux clk support
> + *
> + * Copyright (c) 2018 Nikita Yushchenko <nikita.yoush@xxxxxxxxxxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +#include <common.h>
> +#include <malloc.h>
> +#include <linux/clk.h>
> +#include <linux/err.h>
> +#include <gpio.h>
> +#include <of_gpio.h>
> +#include <init.h>
> +
> +struct clk_gpio {
> + struct clk clk;
> + const char *parent;
> + int gpio;
> +};
> +#define to_clk_gpio(_clk) container_of(_clk, struct clk_gpio, clk)
> +
> +static int clk_gpio_enable(struct clk *clk)
> +{
> + struct clk_gpio *clk_gpio = to_clk_gpio(clk);
> +
> + gpio_set_active(clk_gpio->gpio, true);
> + return 0;
> +}
> +
> +static void clk_gpio_disable(struct clk *clk)
> +{
> + struct clk_gpio *clk_gpio = to_clk_gpio(clk);
> +
> + gpio_set_active(clk_gpio->gpio, false);
> +}
> +
> +static int clk_gpio_is_enabled(struct clk *clk)
> +{
> + struct clk_gpio *clk_gpio = to_clk_gpio(clk);
> +
> + return gpio_is_active(clk_gpio->gpio);
> +}
> +
> +static struct clk_ops clk_gpio_ops = {
> + .set_rate = clk_parent_set_rate,
> + .round_rate = clk_parent_round_rate,
> + .enable = clk_gpio_enable,
> + .disable = clk_gpio_disable,
> + .is_enabled = clk_gpio_is_enabled,
> +};
> +
> +static int of_gpio_clk_setup(struct device_node *node)
> +{
> + struct clk_gpio *clk_gpio;
> + enum of_gpio_flags of_flags;
> + unsigned long flags;
> + int ret;
> +
> + clk_gpio = xzalloc(sizeof(*clk_gpio));
> + if (!clk_gpio)
> + return -ENOMEM;
> +
> + clk_gpio->parent = of_clk_get_parent_name(node, 0);
> + if (!clk_gpio->parent) {
> + ret = -EINVAL;
> + goto no_parent;
> + }
> +
> + clk_gpio->clk.ops = &clk_gpio_ops;
> + clk_gpio->clk.parent_names = &clk_gpio->parent;
> + clk_gpio->clk.num_parents = 1;
> +
> + clk_gpio->clk.name = node->name;
> + of_property_read_string(node, "clock-output-names",
> + &clk_gpio->clk.name);
> +
> + ret = of_get_named_gpio_flags(node, "enable-gpios", 0,
> + &of_flags);
> + if (ret >= 0 && !gpio_is_valid(ret))
> + ret = -EINVAL;
> + if (ret < 0)
> + goto no_gpio;
> + clk_gpio->gpio = ret;
> +
> + flags = GPIOF_OUT_INIT_ACTIVE;
> + if (of_flags & OF_GPIO_ACTIVE_LOW)
> + flags |= GPIOF_ACTIVE_LOW;
> + ret = gpio_request_one(clk_gpio->gpio, flags, clk_gpio->clk.name);
> + if (ret)
> + goto no_request;
> +
> + ret = clk_register(&clk_gpio->clk);
> + if (ret)
> + goto no_register;
> +
> + return of_clk_add_provider(node, of_clk_src_simple_get, &clk_gpio->clk);
> +
> +no_register:
> + gpio_free(clk_gpio->gpio);
> +no_request:
> +no_gpio:
> +no_parent:
> + free(clk_gpio);
> + return ret;
> +}
> +
> +/* Can't use OF_CLK_DECLARE due to need to run after GPIOcontrollers have
> + * registrered */
> +
> +static const struct of_device_id clk_gpio_device_id[] = {
> + { .compatible = "gpio-gate-clock", .data = of_gpio_clk_setup, },
> + {}
> +};
> +
> +static int clk_gpio_init(void)
> +{
> + return of_clk_init(NULL, clk_gpio_device_id);
> +}
> +coredevice_initcall(clk_gpio_init);
> --
> 2.11.0
>
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
