Hi! Barebox for DE0-Nano-SoC succesfully starts on Terasic DE10-Nano board but there is an ethernet issue. After `make ARCH=arm socfpga_defconfig` I see that the CONFIG_DRIVER_NET_DESIGNWARE_SOCFPGA option is disabled. # # Network drivers # ... CONFIG_DRIVER_NET_DESIGNWARE=y # CONFIG_DRIVER_NET_DESIGNWARE_GENERIC is not set # CONFIG_DRIVER_NET_DESIGNWARE_SOCFPGA is not set after enabling CONFIG_DRIVER_NET_DESIGNWARE_SOCFPGA I see 'Could not get sysmgr-syscon node' error message: barebox 2018.03.0-00408-g5b07a6b67d #5 Sat Mar 24 19:50:00 MSK 2018 Board: Terasic DE0-Nano-SoC/Atlas-SoC Kit socfpga_designware_eth ff702000.ethernet: user ID: 0x10, Synopsys ID: 0x37 mdio_bus: miibus0: probed WARNING: at include/linux/reset.h:43/reset_control_get()! socfpga_designware_eth ff702000.ethernet: Could not get sysmgr-syscon node socfpga_designware_eth ff702000.ethernet: probe failed: Function not implemented dw_mmc ff704000.dwmmc0: registered as ff704000.dwmmc0 netconsole: registered as netconsole-1 malloc space: 0x1fefd9c0 -> 0x3fdfb37f (size 511 MiB) mmc0: detected SD card version 2.0 mmc0: registered mmc0 environment load /boot/barebox.env: No such file or directory Maybe you have to create the partition. running /env/bin/init... Hit any key to stop autoboot: 3 barebox@Terasic DE0-Nano-SoC/Atlas-SoC Kit:/ Any suggestions or comments, please? -- Best regards, Antony Pavlov _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
