Re: barebox-state setup

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Andreas,

On Mon, May 22, 2017 at 02:47:18PM +0200, Andreas Wilhelm wrote:
> 
> > First of all, what storage device are you using? Is it a real flash or
> > some EEPROM or NVRAM?
> 
> we are using an SPI NOR flash Micron N25Q128A13ESE40F. Are there any
> known issues with this kind of chips? And what could cause such
> behavior as shown above?

No, there is no known issue. I just wanted to know because real flashes
use the circular backend while EEPROMs use the direct backend.

I just posted a state example dtsi file which works on a Phytec phyFLEX
i.MX6 board. This also contains a SPI NOR flash and I just verified this
works fine on current master with dt-utils 2017.03.0. Maybe you could
compare this with your current setup and see if you find any
differences.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox



[Index of Archives]     [Linux Embedded]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux