The multiline prints lack the indention at the beginning of the second
line. Add these.
Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
---
commands/mmc_extcsd.c | 29 ++++++++++++++---------------
1 file changed, 14 insertions(+), 15 deletions(-)
diff --git a/commands/mmc_extcsd.c b/commands/mmc_extcsd.c
index 42adfe0860..4c8537fe86 100644
--- a/commands/mmc_extcsd.c
+++ b/commands/mmc_extcsd.c
@@ -392,7 +392,7 @@ static int print_field_ge_v7(u8 *reg, int index)
case EXT_CSD_FFU_FEATURES:
print_field_caption(FFU_FEATURES, R);
val = get_field_val(FFU_FEATURES, 0, 0x1);
- printf("\t[0] NUMBER_OF_FW_SECTORS_CORRECTLY_PROGRAMMED:\n"
+ printf("\t[0] NUMBER_OF_FW_SECTORS_CORRECTLY_PROGRAMMED: "
"%ssupported\n", val ? "" : " not");
return 1;
@@ -605,8 +605,7 @@ static int print_field_ge_v6(u8 *reg, int index)
if (val)
printf("\t[0] Device sector size is larger than 512 B\n");
else
- printf("\t[0] Device sector size is 512 B\n"
- "(emulated or native)\n");
+ printf("\t[0] Device sector size is 512 B (emulated or native)\n");
return 1;
case EXT_CSD_NATIVE_SECTOR_SIZE:
@@ -626,8 +625,8 @@ static int print_field_ge_v6(u8 *reg, int index)
str = "single data rate and dual data rate";
else
str = "single data rate";
- printf("\t[0] PROGRAM_CID_CSD_DDR_SUPPORT: CMD26 and CMD27\n"
- "%s mode\n", str);
+ printf("\t[0] PROGRAM_CID_CSD_DDR_SUPPORT: CMD26 and CMD27 %s mode\n",
+ str);
return 1;
case EXT_CSD_PERIODIC_WAKEUP:
@@ -999,8 +998,8 @@ static int print_field_ge_v5(u8 *reg, int index)
str = "may";
else
str = "shall not";
- printf("\t[1] AUTO_EN: Device %s perform background ops while\n"
- "not servicing the host\n", str);
+ printf("\t[1] AUTO_EN: Device %s perform background ops while"
+ "\t not servicing the host\n", str);
return 1;
case EXT_CSD_BKOPS_START:
@@ -1029,7 +1028,7 @@ static int print_field_ge_v5(u8 *reg, int index)
printf("\t[2] EN_REL_WR: %s\n", str);
val = get_field_val(WR_REL_PARAM, 4, 0x1);
printf("\t[4] EN_RPMB_REL_WR: RPMB transfer size is either\n"
- "256B (1 512B frame), 512B (2 512B frame)%s\n",
+ "\t 256B (1 512B frame), 512B (2 512B frame)%s\n",
val ? ", 8KB (32 512B frames)" : "");
return 1;
@@ -1115,7 +1114,7 @@ static int print_field_ge_v5(u8 *reg, int index)
printf("\t[6] CD_PERM_WP_DIS: %s\n", str);
val = get_field_val(USER_WP, 7, 0x1);
- printf("\t[7] PERM_PSWD_DS: Password protection features\n"
+ printf("\t[7] PERM_PSWD_DS: Password protection features "
"are %sabled\n", val ? "dis" : "en");
return 1;
@@ -1129,14 +1128,14 @@ static int print_field_ge_v5(u8 *reg, int index)
printf("\t[0] B_PWR_WP_EN: %s\n", str);
val = get_field_val(BOOT_WP, 1, 0x1);
printf("\t[1] B_PWR_WP_SEC_SEL: B_PWR_WP_EN(Bit 0) applies\n"
- "to boot Area%s only, if B_SEC_WP_SEL (bit 7 is set)\n",
+ "\t to boot Area%s only, if B_SEC_WP_SEL (bit 7 is set)\n",
val ? "2" : "1");
val = get_field_val(BOOT_WP, 2, 0x1);
printf("\t[2] B_PERM_WP_EN: Boot region is %spermanently\n"
- "write protected\n", val ? "" : "not ");
+ "\t write protected\n", val ? "" : "not ");
val = get_field_val(BOOT_WP, 3, 0x1);
printf("\t[3] B_PERM_WP_SEC_SEL: B_PERM_WP_EN(Bit 2) applies\n"
- "to boot Area%s only, if B_SEC_WP_SEL (bit 7 is set)\n",
+ "\t to boot Area%s only, if B_SEC_WP_SEL (bit 7 is set)\n",
val ? "2" : "1");
val = get_field_val(BOOT_WP, 4, 0x1);
if (val)
@@ -1156,7 +1155,7 @@ static int print_field_ge_v5(u8 *reg, int index)
else
str = "boot partitions and B_PERM_WP_SEC_SEL (bit 3) and B_PWR_WP_SEC_SEL (bit 1) have no impact";
printf("\t[6] B_SEC_WP_SEL: B_PERM_WP_EN(bit2) and\n"
- "B_PWR_WP_EN (bit 0) apply to %s\n", str);
+ "\t B_PWR_WP_EN (bit 0) apply to %s\n", str);
return 1;
case EXT_CSD_BOOT_WP_STATUS:
@@ -1211,14 +1210,14 @@ static int print_field_ge_v5(u8 *reg, int index)
case EXT_CSD_MIN_PERF_DDR_R_8_52:
print_field_caption(MIN_PERF_DDR_R_8_52, R);
val = get_field_val(MIN_PERF_DDR_R_8_52, 0, 0xFF);
- printf("\t[7-0] Minimum Read Performance for 8bit at 52MHz in\n"
+ printf("\t[7-0] Minimum Read Performance for 8bit at 52MHz in "
"DDR mode %#02x\n", val);
return 1;
case EXT_CSD_MIN_PERF_DDR_W_8_52:
print_field_caption(MIN_PERF_DDR_W_8_52, R);
val = get_field_val(MIN_PERF_DDR_W_8_52, 0, 0xFF);
- printf("\tMinimum Write Performance for 8bit at 52MHz in DDR\n"
+ printf("\tMinimum Write Performance for 8bit at 52MHz in DDR "
"mode %#02x\n", val);
return 1;
--
2.11.0
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
