On Fri, May 05, 2017 at 05:49:17PM +0200, Michael Grzeschik wrote: > All clocks necessary for the fec are described in the device trees. This > series enables them if found. After that change, all board files > explicitly enabling them can rely on the fec driver. > > Michael Grzeschik (3): > i.MX: fec: also enable optional clocks > ARM: phytec-som-imx6: the ethernet clocks get enabled by fec_imx > ARM: mx6sx-sabresdb: the ethernet clocks get enabled by fec_imx Applied, thanks Sascha > > arch/arm/boards/freescale-mx6sx-sabresdb/board.c | 27 +--------------------- > arch/arm/boards/phytec-som-imx6/board.c | 27 +--------------------- > drivers/net/fec_imx.c | 29 ++++++++++++++++++++++++ > drivers/net/fec_imx.h | 8 +++++++ > 4 files changed, 39 insertions(+), 52 deletions(-) > > -- > 2.11.0 > > > _______________________________________________ > barebox mailing list > barebox@xxxxxxxxxxxxxxxxxxx > http://lists.infradead.org/mailman/listinfo/barebox > -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
