All necessary clocks get already enabled through the fec_imx driver
configured by the devicetree.
Signed-off-by: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
---
arch/arm/boards/phytec-som-imx6/board.c | 27 +--------------------------
1 file changed, 1 insertion(+), 26 deletions(-)
diff --git a/arch/arm/boards/phytec-som-imx6/board.c b/arch/arm/boards/phytec-som-imx6/board.c
index ed9453bdda..4d24a55f74 100644
--- a/arch/arm/boards/phytec-som-imx6/board.c
+++ b/arch/arm/boards/phytec-som-imx6/board.c
@@ -31,7 +31,6 @@
#include <mach/bbu.h>
#include <platform_data/eth-fec.h>
#include <mfd/imx6q-iomuxc-gpr.h>
-#include <linux/clk.h>
#include <linux/micrel_phy.h>
#include <globalvar.h>
@@ -97,32 +96,14 @@ int ksz8081_phy_fixup(struct phy_device *phydev)
return 0;
}
-static int imx6ul_setup_fec(void)
+static void imx6ul_setup_fec(void)
{
void __iomem *gprbase = IOMEM(MX6_IOMUXC_BASE_ADDR) + 0x4000;
uint32_t val;
- struct clk *clk;
phy_register_fixup_for_uid(PHY_ID_KSZ8081, MICREL_PHY_ID_MASK,
ksz8081_phy_fixup);
- clk = clk_lookup("enet_ptp");
- if (IS_ERR(clk))
- goto err;
-
- clk_enable(clk);
-
- clk = clk_lookup("enet_ref");
- if (IS_ERR(clk))
- goto err;
- clk_enable(clk);
-
- clk = clk_lookup("enet_ref_125m");
- if (IS_ERR(clk))
- goto err;
-
- clk_enable(clk);
-
val = readl(gprbase + IOMUXC_GPR1);
/* Use 50M anatop loopback REF_CLK1 for ENET1, clear gpr1[13], set gpr1[17]*/
val &= ~(1 << 13);
@@ -131,12 +112,6 @@ static int imx6ul_setup_fec(void)
val &= ~(1 << 14);
val |= (1 << 18);
writel(val, gprbase + IOMUXC_GPR1);
-
- return 0;
-err:
- pr_err("Setting up DFEC\n");
-
- return -EIO;
}
static int physom_imx6_devices_init(void)
--
2.11.0
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
