Hi,
Why 2 patches?
Best Regards,
J/
On 18:18 Fri 10 Mar , pmamonov@xxxxxxxxx wrote:
> From: Peter Mamonov <pmamonov@xxxxxxxxx>
>
> Signed-off-by: Peter Mamonov <pmamonov@xxxxxxxxx>
> ---
> drivers/net/phy/marvell.c | 126 ++++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 126 insertions(+)
>
> diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
> index 38b2ad31f..ea5a4a9be 100644
> --- a/drivers/net/phy/marvell.c
> +++ b/drivers/net/phy/marvell.c
> @@ -31,6 +31,22 @@
> #define MII_M1011_PHY_STATUS_RESOLVED BIT(11)
> #define MII_M1011_PHY_STATUS_LINK BIT(10)
>
> +#define MII_M1111_PHY_LED_CONTROL 0x18
> +#define MII_M1111_PHY_LED_DIRECT 0x4100
> +#define MII_M1111_PHY_LED_COMBINE 0x411c
> +#define MII_M1111_PHY_EXT_CR 0x14
> +#define MII_M1111_RX_DELAY 0x80
> +#define MII_M1111_TX_DELAY 0x2
> +#define MII_M1111_PHY_EXT_SR 0x1b
> +
> +#define MII_M1111_HWCFG_MODE_MASK 0xf
> +#define MII_M1111_HWCFG_MODE_COPPER_RGMII 0xb
> +#define MII_M1111_HWCFG_MODE_FIBER_RGMII 0x3
> +#define MII_M1111_HWCFG_MODE_SGMII_NO_CLK 0x4
> +#define MII_M1111_HWCFG_MODE_COPPER_RTBI 0x9
> +#define MII_M1111_HWCFG_FIBER_COPPER_AUTO 0x8000
> +#define MII_M1111_HWCFG_FIBER_COPPER_RES 0x2000
> +
> #define MII_M1111_COPPER 0
> #define MII_M1111_FIBER 1
>
> @@ -402,6 +418,107 @@ static int m88e1540_config_init(struct phy_device *phydev)
> return marvell_config_init(phydev);
> }
>
> +static int m88e1111_config_init(struct phy_device *phydev)
> +{
> + int err;
> + int temp;
> +
> + if ((phydev->interface == PHY_INTERFACE_MODE_RGMII) ||
> + (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) ||
> + (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) ||
> + (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)) {
> +
> + temp = phy_read(phydev, MII_M1111_PHY_EXT_CR);
> + if (temp < 0)
> + return temp;
> +
> + if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) {
> + temp |= (MII_M1111_RX_DELAY | MII_M1111_TX_DELAY);
> + } else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) {
> + temp &= ~MII_M1111_TX_DELAY;
> + temp |= MII_M1111_RX_DELAY;
> + } else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) {
> + temp &= ~MII_M1111_RX_DELAY;
> + temp |= MII_M1111_TX_DELAY;
> + }
> +
> + err = phy_write(phydev, MII_M1111_PHY_EXT_CR, temp);
> + if (err < 0)
> + return err;
> +
> + temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
> + if (temp < 0)
> + return temp;
> +
> + temp &= ~(MII_M1111_HWCFG_MODE_MASK);
> +
> + if (temp & MII_M1111_HWCFG_FIBER_COPPER_RES)
> + temp |= MII_M1111_HWCFG_MODE_FIBER_RGMII;
> + else
> + temp |= MII_M1111_HWCFG_MODE_COPPER_RGMII;
> +
> + err = phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);
> + if (err < 0)
> + return err;
> + }
> +
> + if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
> + temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
> + if (temp < 0)
> + return temp;
> +
> + temp &= ~(MII_M1111_HWCFG_MODE_MASK);
> + temp |= MII_M1111_HWCFG_MODE_SGMII_NO_CLK;
> + temp |= MII_M1111_HWCFG_FIBER_COPPER_AUTO;
> +
> + err = phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);
> + if (err < 0)
> + return err;
> + }
> +
> + if (phydev->interface == PHY_INTERFACE_MODE_RTBI) {
> + temp = phy_read(phydev, MII_M1111_PHY_EXT_CR);
> + if (temp < 0)
> + return temp;
> + temp |= (MII_M1111_RX_DELAY | MII_M1111_TX_DELAY);
> + err = phy_write(phydev, MII_M1111_PHY_EXT_CR, temp);
> + if (err < 0)
> + return err;
> +
> + temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
> + if (temp < 0)
> + return temp;
> + temp &= ~(MII_M1111_HWCFG_MODE_MASK | MII_M1111_HWCFG_FIBER_COPPER_RES);
> + temp |= 0x7 | MII_M1111_HWCFG_FIBER_COPPER_AUTO;
> + err = phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);
> + if (err < 0)
> + return err;
> +
> + /* soft reset */
> + err = phy_write(phydev, MII_BMCR, BMCR_RESET);
> + if (err < 0)
> + return err;
> + do
> + temp = phy_read(phydev, MII_BMCR);
> + while (temp & BMCR_RESET);
> +
> + temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
> + if (temp < 0)
> + return temp;
> + temp &= ~(MII_M1111_HWCFG_MODE_MASK | MII_M1111_HWCFG_FIBER_COPPER_RES);
> + temp |= MII_M1111_HWCFG_MODE_COPPER_RTBI | MII_M1111_HWCFG_FIBER_COPPER_AUTO;
> + err = phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);
> + if (err < 0)
> + return err;
> + }
> +
> + err = marvell_of_reg_init(phydev);
> + if (err < 0)
> + return err;
> +
> + return phy_write(phydev, MII_BMCR, BMCR_RESET);
> +}
> +
> static int m88e1121_config_init(struct phy_device *phydev)
> {
> u16 reg;
> @@ -502,6 +619,15 @@ static int m88e1510_config_init(struct phy_device *phydev)
>
> static struct phy_driver marvell_drivers[] = {
> {
> + .phy_id = MARVELL_PHY_ID_88E1111,
> + .phy_id_mask = MARVELL_PHY_ID_MASK,
> + .drv.name = "Marvell 88E1111",
> + .features = PHY_GBIT_FEATURES,
> + .config_init = &m88e1111_config_init,
> + .config_aneg = &genphy_config_aneg,
> + .read_status = &marvell_read_status,
> + },
> + {
> .phy_id = MARVELL_PHY_ID_88E1121R,
> .phy_id_mask = MARVELL_PHY_ID_MASK,
> .drv.name = "Marvell 88E1121R",
> --
> 2.11.0
>
>
> _______________________________________________
> barebox mailing list
> barebox@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/barebox
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
