[PATCH] clk: imx: clk-imx6ul: Use anatop_base pointer for consistency

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The anatop_base pointer was unused, but instead of removing it, assign
and use it for readability like clk-imx6 and clk-imx6sx do.

Signed-off-by: Robin van der Gracht <robin@xxxxxxxxxxx>
---
 drivers/clk/imx/clk-imx6ul.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/clk/imx/clk-imx6ul.c b/drivers/clk/imx/clk-imx6ul.c
index 0ca0652..f28660d 100644
--- a/drivers/clk/imx/clk-imx6ul.c
+++ b/drivers/clk/imx/clk-imx6ul.c
@@ -91,6 +91,7 @@ static int imx6_ccm_probe(struct device_d *dev)
 	int i;
 	struct device_node *ccm_node = dev->device_node;
 
+	anatop_base = IOMEM(MX6_ANATOP_BASE_ADDR);
 	iores = dev_request_mem_resource(dev, 0);
 	if (IS_ERR(iores))
 		return PTR_ERR(iores);
@@ -100,8 +101,6 @@ static int imx6_ccm_probe(struct device_d *dev)
 
 	clks[IMX6UL_CLK_DUMMY] = clk_fixed("dummy", 0);
 
-	base = IOMEM(MX6_ANATOP_BASE_ADDR);
-
 	clks[IMX6UL_PLL1_BYPASS_SRC] = imx_clk_mux("pll1_bypass_src", base + 0x00, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
 	clks[IMX6UL_PLL2_BYPASS_SRC] = imx_clk_mux("pll2_bypass_src", base + 0x30, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
 	clks[IMX6UL_PLL3_BYPASS_SRC] = imx_clk_mux("pll3_bypass_src", base + 0x10, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
-- 
2.9.3


_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox



[Index of Archives]     [Linux Embedded]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux