On Tue, Feb 28, 2017 at 03:31:23PM +0100, Bastian Stender wrote: > Changes since last version: > > console: replace set_active by open/close > - use a counter rather than flags > - inrease counter independent of the presence of the cdev->open() hook > > console: expose consoles in devfs > - test for presence before using flush hook > > video: add support for Solomon SSD1307 OLED controller family > - remove pwm dependency and SSD1307 compatibility > - use tabs and spaces consistently > - remove unnecessary 'struct ssd1307fb_par' > - remove unnecessary xzalloc check > - bail out if any of the *required* device tree properties are missing > - replace errno on gpio failure with error string > - remove obsolete printk include > > Bastian Stender (4): > console: replace set_active by open/close > console: expose consoles in devfs > fb: introduce flush for virtual framebuffer > video: add support for Solomon SSD1307 OLED controller family Applied, thanks Sascha > > commands/fbtest.c | 1 + > common/console.c | 99 +++++++- > drivers/video/Kconfig | 4 + > drivers/video/Makefile | 1 + > drivers/video/fb.c | 26 +++ > drivers/video/fbconsole.c | 31 ++- > drivers/video/ssd1307fb.c | 566 ++++++++++++++++++++++++++++++++++++++++++++++ > include/console.h | 10 +- > include/fb.h | 2 + > net/netconsole.c | 27 ++- > 10 files changed, 744 insertions(+), 23 deletions(-) > create mode 100644 drivers/video/ssd1307fb.c > > -- > 2.11.0 > > > _______________________________________________ > barebox mailing list > barebox@xxxxxxxxxxxxxxxxxxx > http://lists.infradead.org/mailman/listinfo/barebox > -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
