With commit 4ed5b778a56b ("i.MX: i2c: Add Vybrid support") i2c-fsl probe
returns -EINVAL for all non-OF boards.
Since newer planforms, especially vf610 are restricted OF-only it is safe to
assume "fsl,imx21-i2c" if CONFIG_OFDEVICE is not set.
Signed-off-by: Alexander Kurz <akurz@xxxxxxxx>
---
drivers/i2c/busses/i2c-imx.c | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 5677443..4ff4f5c 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -153,6 +153,8 @@ static struct fsl_i2c_clk_pair vf610_i2c_clk_div[] = {
{ 3840, 0x3F }, { 4096, 0x7B }, { 5120, 0x7D }, { 6144, 0x7E },
};
+static const struct fsl_i2c_hwdata imx21_i2c_hwdata;
+
struct fsl_i2c_hwdata {
unsigned regshift;
struct fsl_i2c_clk_pair *clk_div;
@@ -676,10 +678,14 @@ static int __init i2c_fsl_probe(struct device_d *pdev)
clk_enable(i2c_fsl->clk);
#endif
- i2c_fsl->hwdata = of_device_get_match_data(pdev);
- if (!i2c_fsl->hwdata) {
- ret = -EINVAL;
- goto fail;
+ if (IS_ENABLED(CONFIG_OFDEVICE)) {
+ i2c_fsl->hwdata = of_device_get_match_data(pdev);
+ if (!i2c_fsl->hwdata) {
+ ret = -EINVAL;
+ goto fail;
+ }
+ } else {
+ i2c_fsl->hwdata = &imx21_i2c_hwdata;
}
/* Setup i2c_fsl driver structure */
--
2.1.4
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
