On Tue, Feb 7, 2017 at 12:43 AM, Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> wrote:
> Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
> ---
> arch/arm/cpu/psci.c | 13 +++++++++
> arch/arm/mach-imx/imx7.c | 76 ++++++++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 89 insertions(+)
>
> diff --git a/arch/arm/cpu/psci.c b/arch/arm/cpu/psci.c
> index 745b8495e..d650c23ea 100644
> --- a/arch/arm/cpu/psci.c
> +++ b/arch/arm/cpu/psci.c
> @@ -22,6 +22,17 @@
> #include <magicvar.h>
>
> #ifdef CONFIG_ARM_PSCI_DEBUG
> +
> +/*
> + * PSCI debugging functions. Board code can specify a putc() function
> + * which is used for debugging output. Beware that this function is
> + * called while the kernel is running. This means the kernel could have
> + * turned off clocks, configured other baudrates and other stuff that
> + * might confuse the putc function. So it can well be that the debugging
> + * code itself is the problem when somethings not working. You have been
> + * warned.
> + */
> +
> static void (*__putc)(void *ctx, int c);
> static void *putc_ctx;
>
> @@ -220,6 +231,8 @@ int psci_cpu_entry_c(void)
> if (bootm_arm_security_state() == ARM_STATE_HYP)
> armv7_switch_to_hyp();
>
> + psci_printf("core #%d enter function 0x%p\n", cpu, entry);
> +
> entry(context_id);
>
> while (1);
> diff --git a/arch/arm/mach-imx/imx7.c b/arch/arm/mach-imx/imx7.c
> index 1cd27a0db..c4b9b2815 100644
> --- a/arch/arm/mach-imx/imx7.c
> +++ b/arch/arm/mach-imx/imx7.c
> @@ -92,6 +92,80 @@ static void imx7_init_csu(void)
> writel(CSU_INIT_SEC_LEVEL0, csu + i * 4);
> }
>
> +#define GPC_CPU_PGC_SW_PDN_REQ 0xfc
> +#define GPC_CPU_PGC_SW_PUP_REQ 0xf0
> +#define GPC_PGC_C1 0x840
Maybe convert this to something like:
#define PGC_C(n) (0x800 + (n) * 0x40)
... more domain offsets if needed ...
#define GPC_PGC_nCTRL(d) ((d) + 0x00)
and use as:
GPC_PGC_nCTRL(PGC_C(1))
?
> +
> +#define BM_CPU_PGC_SW_PDN_PUP_REQ_CORE1_A7 0x2
> +
> +/* below is for i.MX7D */
> +#define SRC_GPR1_MX7D 0x074
> +#define SRC_A7RCR0 0x004
This constant doesn't seem to be used anywhere, is that intentional?
> +#define SRC_A7RCR1 0x008
> +
> +static void imx_gpcv2_set_core1_power(bool pdn)
> +{
Did you not make this function more generic and take core number as a
parameter on purpose? It just seems like it would be trivial code
change, but maybe I am mistaken
> + void __iomem *gpc = IOMEM(MX7_GPC_BASE_ADDR);
> +
> + u32 reg = pdn ? GPC_CPU_PGC_SW_PUP_REQ : GPC_CPU_PGC_SW_PDN_REQ;
> + u32 val;
> +
> + writel(1, gpc + GPC_PGC_C1);
GPC_PGC_nCTRL_PCR instead of "1"?
> +
> + val = readl(gpc + reg);
> + val |= BM_CPU_PGC_SW_PDN_PUP_REQ_CORE1_A7;
> + writel(val, gpc + reg);
> +
> + while ((readl(gpc + reg) &
> + BM_CPU_PGC_SW_PDN_PUP_REQ_CORE1_A7) != 0)
> + ;
> +
> + writel(0, gpc + GPC_PGC_C1);
> +}
> +
> +static int imx7_cpu_on(u32 cpu_id)
> +{
> + void __iomem *src = IOMEM(MX7_SRC_BASE_ADDR);
> + u32 val;
> +
> + writel(psci_cpu_entry, src + cpu_id * 8 + SRC_GPR1_MX7D);
> + imx_gpcv2_set_core1_power(true);
> +
> + val = readl(src + SRC_A7RCR1);
> + val |= 1 << cpu_id;
BIT(cpu_id)?
> + writel(val, src + SRC_A7RCR1);
Hmm, this function doesn't look like it supports turning on CPU 0, am
I missing something? If not shouldn't it return NOT_SUPPORTED in case
cpu_id is 0?
> +
> + return 0;
> +}
> +
> +static int imx7_cpu_off(void)
> +{
> + void __iomem *src = IOMEM(MX7_SRC_BASE_ADDR);
> + u32 val;
> + int cpu_id = 1;
> +
I have only a very brief familiarity with PCSI, so pleasw bear with me
if what I am asking is dumb, but isn't CPU_OFF operation supposed to
power off current CPU? This function looks like it will power down
core 1 regardless of who's executing the code.
> + val = readl(src + SRC_A7RCR1);
> + val &= ~(1 << cpu_id);
BIT(cpu_id)?
> + writel(val, src + SRC_A7RCR1);
> +
> + /*
> + * FIXME: This reads nice and symmetrically to cpu_on above,
> + * but of course this will never be reached as we have just
> + * put the CPU we are currently running on into reset.
> + */
> +
> + imx_gpcv2_set_core1_power(false);
> +
> + while (1);
> +
> + return 0;
> +}
> +
> +static struct psci_ops imx7_psci_ops = {
> + .cpu_on = imx7_cpu_on,
> + .cpu_off = imx7_cpu_off,
> +};
> +
> int imx7_init(void)
> {
> const char *cputypestr;
> @@ -107,6 +181,8 @@ int imx7_init(void)
>
> imx7_silicon_revision = imx7_cpu_revision();
>
> + psci_set_ops(&imx7_psci_ops);
> +
> switch (imx7_cpu_type()) {
> case IMX7_CPUTYPE_IMX7D:
> cputypestr = "i.MX7d";
> --
> 2.11.0
>
>
> _______________________________________________
> barebox mailing list
> barebox@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/barebox
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
