Hi Alexander,
On Mon, Jan 30, 2017 at 11:50:59PM +0100, Alexander Kurz wrote:
> The Tolino Vision E-Book readers are based on a i.MX6SL SoC. The devices
> boot in internal boot mode from a build-in eMMC, alternatively the devices
> may be set into USB-downloader mode when TP23 is pulled to ground on
> startup using a 1k resistor.
>
> Add support for this devices and make barebox a drop-in replacement for
> the factory shipped u-boot image.
>
> Notable features:
> - support for eMMC, USB, UART, I2C, Keys, LED
> - model detection of Vision, Vision2 and Vision3HD based on OCOTP serial
> number range and generation of model specific android kernel command
> line arguments
> - usbserial barebox console access by pressing backlight button at startup
Nice ;)
Some comments inline.
>
> Todo:
> - PMIC
> - EPD, EPD-PMIC, Splashscreen
> - Vision4HD
>
> Signed-off-by: Alexander Kurz <akurz@xxxxxxxx>
> ---
> Documentation/boards/imx/tolino-vision.rst | 26 +++
> arch/arm/boards/Makefile | 1 +
> arch/arm/boards/tolino-vision/Makefile | 3 +
> arch/arm/boards/tolino-vision/board.c | 77 +++++++
> arch/arm/boards/tolino-vision/env/boot/mmc_android | 51 +++++
> arch/arm/boards/tolino-vision/env/init/partitions | 4 +
> arch/arm/boards/tolino-vision/env/init/serials | 11 +
> arch/arm/boards/tolino-vision/env/init/usbconsole | 8 +
> .../boards/tolino-vision/env/nv/autoboot_timeout | 1 +
> arch/arm/boards/tolino-vision/env/nv/boot.default | 1 +
> .../tolino-vision/env/nv/linux.bootargs.console | 1 +
> .../flash-header-tolino-vision.imxcfg | 86 ++++++++
> arch/arm/boards/tolino-vision/lowlevel.c | 27 +++
> arch/arm/configs/tolino-vision_defconfig | 96 +++++++++
> arch/arm/dts/Makefile | 1 +
> arch/arm/dts/imx6sl-tolino-vision.dts | 225 +++++++++++++++++++++
> arch/arm/mach-imx/Kconfig | 11 +
> images/Makefile.imx | 5 +
> 18 files changed, 635 insertions(+)
> create mode 100644 Documentation/boards/imx/tolino-vision.rst
> create mode 100644 arch/arm/boards/tolino-vision/Makefile
> create mode 100644 arch/arm/boards/tolino-vision/board.c
> create mode 100644 arch/arm/boards/tolino-vision/env/boot/mmc_android
> create mode 100644 arch/arm/boards/tolino-vision/env/init/partitions
> create mode 100644 arch/arm/boards/tolino-vision/env/init/serials
> create mode 100644 arch/arm/boards/tolino-vision/env/init/usbconsole
> create mode 100644 arch/arm/boards/tolino-vision/env/nv/autoboot_timeout
> create mode 100644 arch/arm/boards/tolino-vision/env/nv/boot.default
> create mode 100644 arch/arm/boards/tolino-vision/env/nv/linux.bootargs.console
> create mode 100644 arch/arm/boards/tolino-vision/flash-header-tolino-vision.imxcfg
> create mode 100644 arch/arm/boards/tolino-vision/lowlevel.c
> create mode 100644 arch/arm/configs/tolino-vision_defconfig
> create mode 100644 arch/arm/dts/imx6sl-tolino-vision.dts
>
> diff --git a/Documentation/boards/imx/tolino-vision.rst b/Documentation/boards/imx/tolino-vision.rst
> new file mode 100644
> index 0000000..848076c
> --- /dev/null
> +++ b/Documentation/boards/imx/tolino-vision.rst
> @@ -0,0 +1,26 @@
> +Tolino Vision e-book readers
> +============================
> +
> +The tolino vision series of e-book readers is based on Freescale i.MX6SL SOC.
> +The devices are equiped with:
> +
> +* 512MiB LPDDR2
> +* 4GiB eMMC 4.5
> +
> +Barebox support covers the models Vision (60Q32) and Vision2/3HD (60Q52).
> +
> +The device boots in internal boot mode from the eMMC main partition and
> +is shipped with a vendor modified u-boot imximage.
> +
> +To upload and run a new bootloader the device can be put into USB-downloader
> +mode by the SOC microcode when TP23 is pulled to ground using a 330R resistor
> +during a reset. A new USB device "SE Blank MEGREZ" should appear, barebox may
> +be uploaded using
> +$ scripts/imx/imx-usb-loader -v images/barebox-tolino-vision.img
> +
> +Note: a USB serial ACM console will be launched by a barebox init script
> +when the front light key is pressed during startup (e.g. before running
> +imx-usb-loader)
> +
> +barebox may be installed on the device by uploading the image and running
> +memcpy -s barebox-tolino-vision.img -d /dev/disk0.imximg 0x400 0 523248
> diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile
> index 2f1a79f..ef43e2e 100644
> --- a/arch/arm/boards/Makefile
> +++ b/arch/arm/boards/Makefile
> @@ -118,6 +118,7 @@ obj-$(CONFIG_MACH_TECHNEXION_WANDBOARD) += technexion-wandboard/
> obj-$(CONFIG_MACH_TNY_A9260) += tny-a926x/
> obj-$(CONFIG_MACH_TNY_A9263) += tny-a926x/
> obj-$(CONFIG_MACH_TNY_A9G20) += tny-a926x/
> +obj-$(CONFIG_MACH_TOLINO_VISION) += tolino-vision/
> obj-$(CONFIG_MACH_TORADEX_COLIBRI_T20) += toradex-colibri-t20/
> obj-$(CONFIG_MACH_TOSHIBA_AC100) += toshiba-ac100/
> obj-$(CONFIG_MACH_TQMA53) += tqma53/
> diff --git a/arch/arm/boards/tolino-vision/Makefile b/arch/arm/boards/tolino-vision/Makefile
> new file mode 100644
> index 0000000..9698015
> --- /dev/null
> +++ b/arch/arm/boards/tolino-vision/Makefile
> @@ -0,0 +1,3 @@
> +obj-y += board.o flash-header-tolino-vision.dcd.o
> +extra-y += flash-header-tolino-vision.dcd.S flash-header-tolino-vision.dcd
> +lwl-y += lowlevel.o
> diff --git a/arch/arm/boards/tolino-vision/board.c b/arch/arm/boards/tolino-vision/board.c
> new file mode 100644
> index 0000000..beeaac9
> --- /dev/null
> +++ b/arch/arm/boards/tolino-vision/board.c
> @@ -0,0 +1,77 @@
> +/*
> + * Copyright (C) 2016 Alexander Kurz <akurz@xxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <asm/armlinux.h>
> +#include <asm/io.h>
> +#include <common.h>
> +#include <environment.h>
> +#include <globalvar.h>
> +#include <init.h>
> +#include <linux/sizes.h>
> +#include <mach/generic.h>
> +#include <mach/imx6-regs.h>
> +#include <mach/imx6.h>
> +#include <mach/imx6-fusemap.h>
> +
> +static int vision_device_init(void)
> +{
> + if (!(of_machine_is_compatible("tolino,imx6sl-vision") ||
> + of_machine_is_compatible("tolino,imx6sl-vision2")))
> + return 0;
> +
> + barebox_set_hostname("vision");
> +
> + return 0;
> +}
> +device_initcall(vision_device_init);
> +
> +static int vision_late_init(void)
> +{
> + char serial[19];
> + const char *model;
> + uint32_t ocotp_ser_l, ocotp_ser_h;
> + int ret = 0;
This function lacks a protection against running on other machines. You
can probably merge the two initcalls into one.
> +
> + ret |= imx_ocotp_read_field(OCOTP_UNIQUE_ID(0), &ocotp_ser_l);
> + ret |= imx_ocotp_read_field(OCOTP_UNIQUE_ID(1), &ocotp_ser_h);
> + if (ret) {
> + pr_err("could not determine OCOTP_UNIQUE_ID\n");
> + return ret;
> + }
Not quite likely, but when both calls to imx_ocotp_read_field() have
different non-successful return values then you have rubbish in 'ret'.
Better return a fixed value then instead of ret.
> +
> + snprintf(serial, sizeof serial, "0x%8.8x%8.8x",
> + ocotp_ser_h, ocotp_ser_l);
> + globalvar_add_simple("board.ocotp_serial", serial);
> +
> + switch ((ocotp_ser_l & 0xff000000) >> 24) {
> + case 0xdb:
> + model = "vision";
> + break;
> + case 0xdf:
> + model = "vision2";
> + break;
> + case 0xe3:
> + model = "vision3hd";
> + break;
> + default:
> + model = "unknown";
> + break;
> + }
> +
> + globalvar_add_simple("board.model", model);
> +
> + return 0;
> +}
> +
> +late_initcall(vision_late_init);
> diff --git a/arch/arm/boards/tolino-vision/env/boot/mmc_android b/arch/arm/boards/tolino-vision/env/boot/mmc_android
> new file mode 100644
> index 0000000..d5d77c0
> --- /dev/null
> +++ b/arch/arm/boards/tolino-vision/env/boot/mmc_android
> @@ -0,0 +1,51 @@
> +#!/bin/sh
> +# Boot the factory-shipped Android kernel image
> +
> +aimage_noverwrite_tags=1
> +aimage_noverwrite_bootargs=1
> +oftree -f
> +armlinux_architecture=4308
> +armlinux_system_serial="$global.board.ocotp_serial"
> +armlinux_system_rev="0x60200"
> +global linux.bootargs.dyn.root="rootfstype=ext4 root=/dev/mmcblk0p1 ro"
> +global linux.bootargs.android="androidboot.console=ttymxc0"
> +
> +global linux.bootargs.video="fbmem=6M video=mxcepdcfb:E060SCM,bpp=16 no_console_suspend"
> +global linux.bootargs.serial="androidboot.serialno=$global.board.serial"
> +global linux.bootargs.misc="init=/init max17135:pass=2, mem=498M boot_port=3"
> +
> +sz_hwconfig=110
> +addr_hwconfig=0x9ffffe00
> +
> +if [ X$global.board.model = "Xvision" ]; then
> + sz_logo=388096
> + addr_logo=0x9f928200
> + sz_waveforms=6786528
> + addr_waveforms=0x9f987000
> +fi
> +
> +if [ X$global.board.model = "Xvision2" ]; then
> + sz_logo=388096
> + addr_logo=0x9ffa1000
> + sz_waveforms=6776288
> + addr_waveforms=0x9f92aa00
> +fi
> +
> +if [ X$global.board.model = "Xvision3hd" ]; then
> + sz_logo=776128
> + addr_logo=0x9ff42600
> + sz_waveforms=6572512
> + addr_waveforms=0x9f8fdc00
> +fi
> +
> +global linux.bootargs.hwconfig="hwcfg_p=$addr_hwconfig hwcfg_sz=$sz_hwconfig"
> +memcpy -s /dev/disk0.hwconfig 0 $addr_hwconfig $sz_hwconfig
> +global linux.bootargs.logo="logo_p=$addr_logo logo_sz=$sz_logo"
> +memcpy -s /dev/disk0.logo 0 $addr_logo $sz_logo
> +global linux.bootargs.waveforms="waveform_p=$addr_waveforms waveform_sz=$sz_waveforms"
> +memcpy -s /dev/disk0.waveforms 0 $addr_waveforms $sz_waveforms
> +
> +gpio_direction_output 46 1
> +gpio_direction_output 39 1
> +
> +bootm -L 0x81000000 -a 0x80800000 -v /dev/disk0.kernel
> diff --git a/arch/arm/boards/tolino-vision/env/init/partitions b/arch/arm/boards/tolino-vision/env/init/partitions
> new file mode 100644
> index 0000000..0a313b1
> --- /dev/null
> +++ b/arch/arm/boards/tolino-vision/env/init/partitions
> @@ -0,0 +1,4 @@
> +#!/bin/sh
> +# probe mci1 first (eMMC at SD4)
> +mci1.probe=1
> +addpart /dev/disk0 0x200@0x200(serial),0x7fbf0@0x400(imximg),0x800@0x80000(hwconfig),0x3fc00@0xc0000(bootenv),0x400000@0x100000(kernel),0x400000@0x600000(initrd),0xa00000@0x700000(waveforms),0x200000@0x1100000(logo)
> diff --git a/arch/arm/boards/tolino-vision/env/init/serials b/arch/arm/boards/tolino-vision/env/init/serials
> new file mode 100644
> index 0000000..675da6d
> --- /dev/null
> +++ b/arch/arm/boards/tolino-vision/env/init/serials
> @@ -0,0 +1,11 @@
> +#!/bin/sh
> +
> +global board.serial
> +
> +# alphanumeric containing the serial number
> +if test -b /dev/disk0.serial; then
> + if memcpy -s /dev/disk0.serial -d tmp_serial -b 3 0 41; then
> + readf tmp_serial global.board.serial
> + fi
> +fi
> +[ -f tmp_serial ] && rm tmp_serial
> diff --git a/arch/arm/boards/tolino-vision/env/init/usbconsole b/arch/arm/boards/tolino-vision/env/init/usbconsole
> new file mode 100644
> index 0000000..46986d9
> --- /dev/null
> +++ b/arch/arm/boards/tolino-vision/env/init/usbconsole
> @@ -0,0 +1,8 @@
> +#!/bin/sh
> +
> +# Frontlight key activates usbserial access for 60s
> +echo
> +if gpio_get_value 90; then
> + usbserial
> + global.autoboot_timeout=60
> +fi
> diff --git a/arch/arm/boards/tolino-vision/env/nv/autoboot_timeout b/arch/arm/boards/tolino-vision/env/nv/autoboot_timeout
> new file mode 100644
> index 0000000..00750ed
> --- /dev/null
> +++ b/arch/arm/boards/tolino-vision/env/nv/autoboot_timeout
> @@ -0,0 +1 @@
> +3
> diff --git a/arch/arm/boards/tolino-vision/env/nv/boot.default b/arch/arm/boards/tolino-vision/env/nv/boot.default
> new file mode 100644
> index 0000000..3f8953f
> --- /dev/null
> +++ b/arch/arm/boards/tolino-vision/env/nv/boot.default
> @@ -0,0 +1 @@
> +mmc_android
> diff --git a/arch/arm/boards/tolino-vision/env/nv/linux.bootargs.console b/arch/arm/boards/tolino-vision/env/nv/linux.bootargs.console
> new file mode 100644
> index 0000000..d775310
> --- /dev/null
> +++ b/arch/arm/boards/tolino-vision/env/nv/linux.bootargs.console
> @@ -0,0 +1 @@
> +console=ttymxc0,115200
> diff --git a/arch/arm/boards/tolino-vision/flash-header-tolino-vision.imxcfg b/arch/arm/boards/tolino-vision/flash-header-tolino-vision.imxcfg
> new file mode 100644
> index 0000000..a7b9330
> --- /dev/null
> +++ b/arch/arm/boards/tolino-vision/flash-header-tolino-vision.imxcfg
> @@ -0,0 +1,86 @@
> +loadaddr 0x88000000
> +soc imx6
> +dcdofs 0x400
> +# CCM
> +wm 32 0x020c4018 0x00260324
> +
> +# CCM CGR
> +wm 32 0x020c4068 0xffffffff
> +wm 32 0x020c406c 0xffffffff
> +wm 32 0x020c4070 0xffffffff
> +wm 32 0x020c4074 0xffffffff
> +wm 32 0x020c4078 0xffffffff
> +wm 32 0x020c407c 0xffffffff
> +wm 32 0x020c4080 0xffffffff
> +wm 32 0x020c4084 0xffffffff
> +
> +# IOMUX
> +wm 32 0x020e0344 0x00003028
> +wm 32 0x020e0348 0x00003028
> +wm 32 0x020e034c 0x00003028
> +wm 32 0x020e0350 0x00003028
> +wm 32 0x020e030c 0x00000028
> +wm 32 0x020e0310 0x00000028
> +wm 32 0x020e0314 0x00000028
> +wm 32 0x020e0318 0x00000028
> +wm 32 0x020e0300 0x00000030
> +wm 32 0x020e031c 0x00000030
> +wm 32 0x020e0338 0x00000030
> +wm 32 0x020e0320 0x00000030
> +wm 32 0x020e032c 0x00000000
> +wm 32 0x020e05c4 0x00000028
> +wm 32 0x020e05cc 0x00000028
> +wm 32 0x020e05d4 0x00000028
> +wm 32 0x020e05d8 0x00000028
> +wm 32 0x020e05ac 0x00000030
> +wm 32 0x020e05c8 0x00000030
> +wm 32 0x020e05b0 0x00020000
> +wm 32 0x020e05b4 0x00000000
> +wm 32 0x020e05c0 0x00020000
> +wm 32 0x020e05d0 0x00080000
> +wm 32 0x020e05bc 0x00001000
> +
> +# MMDC
> +wm 32 0x021b001c 0x00008000
> +wm 32 0x021b085c 0x1b4700c7
> +wm 32 0x021b0800 0xa1390003
> +wm 32 0x021b0890 0x00480000
> +wm 32 0x021b08b8 0x00000800
> +wm 32 0x021b081c 0x33333333
> +wm 32 0x021b0820 0x33333333
> +wm 32 0x021b0824 0x33333333
> +wm 32 0x021b0828 0x33333333
> +wm 32 0x021b082c 0xf3333333
> +wm 32 0x021b0830 0xf3333333
> +wm 32 0x021b0834 0xf3333333
> +wm 32 0x021b0838 0xf3333333
> +wm 32 0x021b0848 0x44404646
> +wm 32 0x021b0850 0x38343830
> +wm 32 0x021b083c 0x20000000
> +wm 32 0x021b0840 0x00000000
> +wm 32 0x021b08c0 0x24911492
> +wm 32 0x021b08b8 0x00000800
> +wm 32 0x021b000c 0x33374135
> +wm 32 0x021b0004 0x00020024
> +wm 32 0x021b0010 0x00100A83
> +wm 32 0x021b0014 0x00000093
> +wm 32 0x021b0018 0x00001688
> +wm 32 0x021b002c 0x0F9F26D2
> +wm 32 0x021b0030 0x0000020E
> +wm 32 0x021b0038 0x00190778
> +wm 32 0x021b0008 0x00000000
> +wm 32 0x021b0040 0x0000004F
> +# MMDC_MDCTL: CS0 only, 14 rows, 10 cols, 32 bit
> +wm 32 0x021b0000 0x83110000
> +wm 32 0x021b001c 0x003f8030
> +wm 32 0x021b001c 0xff0a8030
> +wm 32 0x021b001c 0x82018030
> +wm 32 0x021b001c 0x06028030
> +wm 32 0x021b001c 0x03038030
> +wm 32 0x021b0800 0xa1310003
> +wm 32 0x021b0020 0x00001800
> +wm 32 0x021b0818 0x00000000
> +wm 32 0x021b08b8 0x00000800
> +wm 32 0x021b0004 0x00025564
> +wm 32 0x021b0404 0x00011006
> +wm 32 0x021b001c 0x00000000
> diff --git a/arch/arm/boards/tolino-vision/lowlevel.c b/arch/arm/boards/tolino-vision/lowlevel.c
> new file mode 100644
> index 0000000..08a48f8
> --- /dev/null
> +++ b/arch/arm/boards/tolino-vision/lowlevel.c
> @@ -0,0 +1,27 @@
> +#include <debug_ll.h>
> +#include <common.h>
> +#include <linux/sizes.h>
> +#include <io.h>
> +#include <asm/barebox-arm-head.h>
> +#include <asm/barebox-arm.h>
> +#include <asm/sections.h>
> +#include <asm/cache.h>
> +#include <asm/mmu.h>
> +#include <mach/imx6.h>
> +
> +extern char __dtb_imx6sl_tolino_vision_start[];
> +
> +ENTRY_FUNCTION(start_imx6sl_tolino_vision, r0, r1, r2)
> +{
> + void *fdt;
> +
> + imx6_cpu_lowlevel_init();
> +
> + if (IS_ENABLED(CONFIG_DEBUG_LL)) {
> + writel(0x4, 0x020e016c);
> + imx6_uart_setup_ll();
> + }
> +
> + fdt = __dtb_imx6sl_tolino_vision_start - get_runtime_offset();
> + barebox_arm_entry(0x80000000, SZ_512M - 14 * SZ_1M, fdt);
> +}
> diff --git a/arch/arm/configs/tolino-vision_defconfig b/arch/arm/configs/tolino-vision_defconfig
> new file mode 100644
> index 0000000..e92476a
> --- /dev/null
> +++ b/arch/arm/configs/tolino-vision_defconfig
> @@ -0,0 +1,96 @@
> +CONFIG_ARCH_IMX=y
> +CONFIG_IMX_MULTI_BOARDS=y
> +CONFIG_MACH_TOLINO_VISION=y
> +CONFIG_ARCH_IMX_USBLOADER=y
> +CONFIG_IMX_IIM=y
> +CONFIG_IMX_IIM_FUSE_BLOW=y
> +CONFIG_THUMB2_BAREBOX=y
> +CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
> +CONFIG_ARM_UNWIND=y
> +CONFIG_MMU=y
> +CONFIG_TEXT_BASE=0x0
> +CONFIG_MALLOC_SIZE=0x0
> +CONFIG_MALLOC_TLSF=y
> +CONFIG_KALLSYMS=y
> +CONFIG_RELOCATABLE=y
> +CONFIG_HUSH_FANCY_PROMPT=y
> +CONFIG_CMDLINE_EDITING=y
> +CONFIG_AUTO_COMPLETE=y
> +CONFIG_MENU=y
> +CONFIG_BOOTM_SHOW_TYPE=y
> +CONFIG_BOOTM_VERBOSE=y
> +CONFIG_BOOTM_INITRD=y
> +CONFIG_BOOTM_OFTREE=y
> +CONFIG_BOOTM_OFTREE_UIMAGE=y
> +CONFIG_BOOTM_AIMAGE=y
> +CONFIG_BLSPEC=y
> +CONFIG_CONSOLE_ACTIVATE_NONE=y
> +CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
> +CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/tolino-vision/env/"
Instead of putting the path into the config you should:
- move env/ directory to defaultenv-tolino-vision
- Add bbenv-y += defaultenv-tolino-vision to the board Makefile
- call defaultenv_append_directory(defaultenv_tolino_vision); from your
board code
This allows your board environment to co-exist with other board specific
environments that might be enabled in your config.
Also I want to encourage you to add your board to imx_v7_defconfig
rather than adding your own config. I want to keep the number of configs
small as the config files tend to bitrot quiet fast.
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index d77a7b6..a6cda6e 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -68,6 +68,7 @@ pbl-dtb-$(CONFIG_MACH_SOCFPGA_TERASIC_SOCKIT) += socfpga_cyclone5_sockit.dtb.o
> pbl-dtb-$(CONFIG_MACH_SOLIDRUN_CUBOX) += dove-cubox-bb.dtb.o
> pbl-dtb-$(CONFIG_MACH_SOLIDRUN_MICROSOM) += imx6dl-hummingboard.dtb.o imx6q-hummingboard.dtb.o imx6q-h100.dtb.o
> pbl-dtb-$(CONFIG_MACH_TECHNEXION_WANDBOARD) += imx6q-wandboard.dtb.o imx6dl-wandboard.dtb.o
> +pbl-dtb-$(CONFIG_MACH_TOLINO_VISION) += imx6sl-tolino-vision.dtb.o
> pbl-dtb-$(CONFIG_MACH_TORADEX_COLIBRI_T20) += tegra20-colibri-iris.dtb.o
> pbl-dtb-$(CONFIG_MACH_TOSHIBA_AC100) += tegra20-paz00.dtb.o
> pbl-dtb-$(CONFIG_MACH_TQMA53) += imx53-mba53.dtb.o
> diff --git a/arch/arm/dts/imx6sl-tolino-vision.dts b/arch/arm/dts/imx6sl-tolino-vision.dts
> new file mode 100644
> index 0000000..9c8c0fe
> --- /dev/null
> +++ b/arch/arm/dts/imx6sl-tolino-vision.dts
> @@ -0,0 +1,225 @@
> +/*
> + * Copyright (C) 2013 Freescale Semiconductor, Inc.
Have you copied this from FSL code or should there rather be your own
copyright here?
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include <arm/imx6sl.dtsi>
> +
> +/ {
> + model = "Tolino Vision";
> + compatible = "tolino,imx6sl-vision", "fsl,imx6sl";
> +
> + chosen {
> + linux,stdout-path = &uart1;
> + };
> +
> + memory {
> + reg = <0x80000000 0x20000000>;
> + };
You should drop this. It's overwritten anyway by the real amount of
SDRAM. Hardcoding it is a bit dangerous, because if the real amount
of SDRAM is different from what hardcoded here you will get conflicts
during RAM registration during barebox startup.
> +
> + leds {
> + compatible = "gpio-leds";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_led>;
> +
> + user {
> + label = "power";
> + gpios = <&gpio5 7 GPIO_ACTIVE_LOW>;
> + linux,default-trigger = "heartbeat";
> + };
> + };
> +};
> +
> +&iomuxc {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_hog>;
> +
> + imx6sl-evk {
> + pinctrl_hog: hoggrp {
> + fsl,pins = <
> + /* EPD-PMIC */
> + MX6SL_PAD_EPDC_VCOM0__GPIO2_IO03 0x17059
> + MX6SL_PAD_EPDC_PWRWAKEUP__GPIO2_IO14 0x17059
> + MX6SL_PAD_EPDC_PWRCTRL0__GPIO2_IO07 0x17059
> + MX6SL_PAD_EPDC_PWRSTAT__GPIO2_IO13 0x17059
> + /* Power key */
> + MX6SL_PAD_SD1_DAT1__GPIO5_IO08 0x17059
> + /* 60Q32 SD CD */
> + MX6SL_PAD_SD2_DAT4__GPIO5_IO02 0x17059
> + >;
> + };
> +
> + pinctrl_uart1: uart1grp {
> + fsl,pins = <
> + MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1
> + MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1
> + >;
> + };
> +
> + pinctrl_usdhc2: usdhc2grp {
> + fsl,pins = <
> + MX6SL_PAD_SD2_CMD__SD2_CMD 0x17059
> + MX6SL_PAD_SD2_CLK__SD2_CLK 0x10059
> + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x17059
> + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x17059
> + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x17059
> + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x17059
> + >;
> + };
> +
> + pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
> + fsl,pins = <
> + MX6SL_PAD_SD2_CMD__SD2_CMD 0x170b9
> + MX6SL_PAD_SD2_CLK__SD2_CLK 0x100b9
> + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170b9
> + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170b9
> + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170b9
> + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170b9
> + >;
> + };
> +
> + pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
> + fsl,pins = <
> + MX6SL_PAD_SD2_CMD__SD2_CMD 0x170f9
> + MX6SL_PAD_SD2_CLK__SD2_CLK 0x100f9
> + MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x170f9
> + MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x170f9
> + MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x170f9
> + MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x170f9
> + >;
> + };
> +
> + pinctrl_usdhc4: usdhc4grp {
> + fsl,pins = <
> + MX6SL_PAD_FEC_TX_CLK__SD4_CMD 0x17059
> + MX6SL_PAD_FEC_MDIO__SD4_CLK 0x10059
> + MX6SL_PAD_FEC_RX_ER__SD4_DATA0 0x17059
> + MX6SL_PAD_FEC_CRS_DV__SD4_DATA1 0x17059
> + MX6SL_PAD_FEC_RXD1__SD4_DATA2 0x17059
> + MX6SL_PAD_FEC_TXD0__SD4_DATA3 0x17059
> + MX6SL_PAD_FEC_MDC__SD4_DATA4 0x17059
> + MX6SL_PAD_FEC_RXD0__SD4_DATA5 0x17059
> + MX6SL_PAD_FEC_TX_EN__SD4_DATA6 0x17059
> + MX6SL_PAD_FEC_TXD1__SD4_DATA7 0x17059
> + MX6SL_PAD_FEC_REF_CLK__SD4_RESET 0x17059
> + >;
> + };
> +
> + pinctrl_usdhc4_100mhz: usdhc4grp100mhz {
> + fsl,pins = <
> + MX6SL_PAD_FEC_TX_CLK__SD4_CMD 0x170b9
> + MX6SL_PAD_FEC_MDIO__SD4_CLK 0x100b9
> + MX6SL_PAD_FEC_RX_ER__SD4_DATA0 0x170b9
> + MX6SL_PAD_FEC_CRS_DV__SD4_DATA1 0x170b9
> + MX6SL_PAD_FEC_RXD1__SD4_DATA2 0x170b9
> + MX6SL_PAD_FEC_TXD0__SD4_DATA3 0x170b9
> + MX6SL_PAD_FEC_MDC__SD4_DATA4 0x170b9
> + MX6SL_PAD_FEC_RXD0__SD4_DATA5 0x170b9
> + MX6SL_PAD_FEC_TX_EN__SD4_DATA6 0x170b9
> + MX6SL_PAD_FEC_TXD1__SD4_DATA7 0x170b9
> + MX6SL_PAD_FEC_REF_CLK__SD4_RESET 0x170b9
> + >;
> + };
> +
> + pinctrl_usdhc4_200mhz: usdhc4grp200mhz {
> + fsl,pins = <
> + MX6SL_PAD_FEC_TX_CLK__SD4_CMD 0x170f9
> + MX6SL_PAD_FEC_MDIO__SD4_CLK 0x100f9
> + MX6SL_PAD_FEC_RX_ER__SD4_DATA0 0x170f9
> + MX6SL_PAD_FEC_CRS_DV__SD4_DATA1 0x170f9
> + MX6SL_PAD_FEC_RXD1__SD4_DATA2 0x170f9
> + MX6SL_PAD_FEC_TXD0__SD4_DATA3 0x170f9
> + MX6SL_PAD_FEC_MDC__SD4_DATA4 0x170f9
> + MX6SL_PAD_FEC_RXD0__SD4_DATA5 0x170f9
> + MX6SL_PAD_FEC_TX_EN__SD4_DATA6 0x170f9
> + MX6SL_PAD_FEC_TXD1__SD4_DATA7 0x170f9
> + MX6SL_PAD_FEC_REF_CLK__SD4_RESET 0x170f9
> + >;
> + };
> +
> + pinctrl_led: ledgrp {
> + fsl,pins = <
> + MX6SL_PAD_SD1_DAT6__GPIO5_IO07 0x1b0b1
> + >;
> + };
> +
> + pinctrl_i2c1: i2c1grp {
> + fsl,pins = <
> + MX6SL_PAD_I2C1_SCL__I2C1_SCL 0x4001b8b1
> + MX6SL_PAD_I2C1_SDA__I2C1_SDA 0x4001b8b1
> + >;
> + };
> +
> + pinctrl_i2c2: i2c2grp {
> + fsl,pins = <
> + MX6SL_PAD_I2C2_SCL__I2C2_SCL 0x4001b8b1
> + MX6SL_PAD_I2C2_SDA__I2C2_SDA 0x4001b8b1
> + >;
> + };
> +
> + pinctrl_i2c3: i2c3grp {
> + fsl,pins = <
> + MX6SL_PAD_REF_CLK_24M__I2C3_SCL 0x4001b8b1
> + MX6SL_PAD_REF_CLK_32K__I2C3_SDA 0x4001b8b1
> + >;
> + };
> + };
> +};
> +
> +&uart1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart1>;
> + status = "okay";
> +};
> +
> +&usdhc2 {
> + pinctrl-names = "default", "state_100mhz", "state_200mhz";
> + pinctrl-0 = <&pinctrl_usdhc2>;
> + pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
> + pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
> + cd-gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
> + status = "okay";
> +};
> +
> +&usdhc4 {
> + pinctrl-names = "default", "state_100mhz", "state_200mhz";
> + pinctrl-0 = <&pinctrl_usdhc4>;
> + pinctrl-1 = <&pinctrl_usdhc4_100mhz>;
> + pinctrl-2 = <&pinctrl_usdhc4_200mhz>;
> + bus-width = <8>;
> + status = "okay";
> +};
> +
> +&i2c1 {
> + clock-frequency = <100000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c1>;
> + status = "okay";
> +};
> +
> +&i2c2 {
> + clock-frequency = <100000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c2>;
> + status = "okay";
> +};
> +
> +&i2c3 {
> + clock-frequency = <100000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c3>;
> + status = "okay";
> +};
> +
> +&usbotg1 {
> + dr_mode = "peripheral";
> + disable-over-current;
> + status = "okay";
> +};
> diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
> index c1ed5b2..a8ca3c5 100644
> --- a/arch/arm/mach-imx/Kconfig
> +++ b/arch/arm/mach-imx/Kconfig
> @@ -321,6 +321,17 @@ config MACH_FREESCALE_IMX6SX_SABRESDB
> select I2C
> select I2C_IMX
>
> +config MACH_TOLINO_VISION
> + bool "Tolino Vision e-book readers"
> + select ARCH_IMX6SL
> + select I2C
> + select I2C_IMX
> + select IMX_OCOTP
> + help
> + Say Y here if you are using an i.MX6SL based Tolino Vision
> + e-book reader, current support covers the models Vision, Vision2
> + and Vision3HD.
> +
> config MACH_NITROGEN6
> bool "BoundaryDevices Nitrogen6 boards"
> select ARCH_IMX6
> diff --git a/images/Makefile.imx b/images/Makefile.imx
> index 84f6652..33c3284 100644
> --- a/images/Makefile.imx
> +++ b/images/Makefile.imx
> @@ -304,6 +304,11 @@ CFG_start_imx6qp_nitrogen6_max.pblx.imximg = $(board)/boundarydevices-nitrogen6/
> FILE_barebox-boundarydevices-imx6qp-nitrogen6_max.img = start_imx6qp_nitrogen6_max.pblx.imximg
> image-$(CONFIG_MACH_NITROGEN6) += barebox-boundarydevices-imx6qp-nitrogen6_max.img
>
> +pblx-$(CONFIG_MACH_TOLINO_VISION) += start_imx6sl_tolino_vision
> +CFG_start_imx6sl_tolino_vision.pblx.imximg = $(board)/tolino-vision/flash-header-tolino-vision.imxcfg
> +FILE_barebox-tolino-vision.img = start_imx6sl_tolino_vision.pblx.imximg
> +image-$(CONFIG_MACH_TOLINO_VISION) += barebox-tolino-vision.img
> +
> pblx-$(CONFIG_MACH_TX6X) += start_imx6dl_tx6x_512m
> CFG_start_imx6dl_tx6x_512m.pblx.imximg = $(board)/karo-tx6x/flash-header-tx6dl-512m.imxcfg
> FILE_barebox-karo-imx6dl-tx6x-512m.img = start_imx6dl_tx6x_512m.pblx.imximg
> --
> 2.1.4
>
>
> _______________________________________________
> barebox mailing list
> barebox@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
