[PATCH 1/3] ARM: i.MX6 Santaro: Add enable-delay for the display

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The display needs a time to settle, set an enable-delay
of 200ms to avoid flickering.

Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
---
 arch/arm/dts/imx6q-guf-santaro.dts | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/dts/imx6q-guf-santaro.dts b/arch/arm/dts/imx6q-guf-santaro.dts
index 2bd1a26..e8a2b96 100644
--- a/arch/arm/dts/imx6q-guf-santaro.dts
+++ b/arch/arm/dts/imx6q-guf-santaro.dts
@@ -63,6 +63,7 @@
 		compatible = "simple-panel";
 		backlight = <&backlight>;
 		enable-gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>;
+		enable-delay = <200>;
 
 		port {
 			panel_in: endpoint {
-- 
2.8.1


_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox



[Index of Archives]     [Linux Embedded]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux