On Mon, 4 Jul 2016, Sascha Hauer wrote:
> On Sat, Jul 02, 2016 at 04:50:02PM +0200, Alexander Kurz wrote:
> > The IMX watchdog driver currently distinguishes two variants: imx1-wdt
> > using a 32-bit register interface and imx21-wdt with a 16-bit register
> > interface.
> > Further distinguishment is required: the i.MX21, i.MX27 and i.MX31 SOC
> > do provide a three register interface (WCR, WSR, WRSR) while later SOC
> > starting with i.MX25 provide two additional registers (WICR and WMCR).
> > The five-register interface is also used on i.MX35, and Cortex-A based
> > i.MX SOC.
> >
> > With commit 4cc0a3d9c547 ("wdog: imx-wd: Disable watchdog powerdown counter")
> > one of the extended registers (WMCR) got used first.
> >
> > Make imx-wd distinguish between the three and five register Watchdog Timers
> > and introduce the five register support as imx25-wdt.
> >
> > Note on DTS: keep the i.MX related DTS in sync with linux and make the
> > existing programming model fsl,imx21-wdt behave like fsl,imx25-wdt for
> > the mean time until this is addressed upstream in linux.
> >
> > fixes: 4cc0a3d9c547 ("wdog: imx-wd: Disable watchdog powerdown counter")
>
> So beginning with 4cc0a3d9c547 i.MX21, i.MX27 and i.MX31 accidently use
> the five-register interface. What are the practical consequences? Does
> the driver still work properly on these SoCs?
The access of this non-existing register triggers a crash of a barebox run
out of the factory shipped u-boot on an MX31 based Kindle-DX (u-boot gets
re-started, probably some abort handler) - I dont have any JTAG interface
running yet to see what's going on in detail.
>
> I'm aksing because even with this patch...
>
> > .compatible = "fsl,imx21-wdt",
> > - .data = &imx21_wd_ops,
> > + /* FIXME: backward compaibility for imported linux DTS
> > + Most references to fsl,imx21-wdt from linux imported DTS
> > + linux actually mean fsl,imx25-wdt. Make fsl,imx21-wdt
> > + behave like fsl,imx25-wdt for the mean time until
> > + this is fixed there */
> > + .data = &imx25_wd_ops,
> > + }, {
>
> ...device tree based i.MX21/27/31 boards still use the five-register
> interface. There are no i.MX21/31 based device tree boards, but there
> are some i.MX27 boards with device tree support.
Yes, this point is open.
I did not want to break the sync between the linux und barebox IMX DTS
stock. My Idea was:
1) do this first fix in barebox which will not cover DTS (do
workaround "wdt21 behaves like wdt25")
2) fix it in linux, wait till next rc which contains the fix
3) linux DTS gets imported into barebox, and the workarkound wdt21 behaves
like wdt25" can be removed
Regards, Alexander
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
