On Mon, Jul 04, 2016 at 11:27:37AM +0200, Sascha Hauer wrote:
> The Vincell boards do the SDRAM setup from board init code, so the
> image size is limited to the internal SRAM size. To overcome this
> limitation use the NAND xload support.
>
> Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
> ---
> arch/arm/boards/guf-vincell/lowlevel.c | 25 ++++++++++++++++++++++---
> arch/arm/mach-imx/Kconfig | 9 +++++++++
> images/Makefile.imx | 14 ++++++++++----
> 3 files changed, 41 insertions(+), 7 deletions(-)
>
> diff --git a/arch/arm/boards/guf-vincell/lowlevel.c b/arch/arm/boards/guf-vincell/lowlevel.c
> index f4bd44e..34c28f7 100644
> --- a/arch/arm/boards/guf-vincell/lowlevel.c
> +++ b/arch/arm/boards/guf-vincell/lowlevel.c
> @@ -11,6 +11,7 @@
> #include <mach/generic.h>
> #include <asm/barebox-arm.h>
> #include <asm/barebox-arm-head.h>
> +#include <mach/xload.h>
>
> #define IOMUX_PADCTL_DDRI_DDR (1 << 9)
>
> @@ -127,8 +128,9 @@ static noinline void imx53_guf_vincell_init(void *fdt)
> {
> void __iomem *ccm = (void *)MX53_CCM_BASE_ADDR;
> u32 r;
> + enum bootsource src;
> + int instance;
>
> - imx5_cpu_lowlevel_init();
> arm_setup_stack(0xf8020000 - 8);
>
> writel(0x0088494c, ccm + MX5_CCM_CBCDR);
> @@ -149,11 +151,28 @@ static noinline void imx53_guf_vincell_init(void *fdt)
> disable_watchdog();
> configure_dram_iomux();
> imx_esdctlv4_init();
> +
> + imx53_get_boot_source(&src, &instance);
> +
> + if (src == BOOTSOURCE_NAND &&
> + is_enabled(CONFIG_MACH_GUF_VINCELL_XLOAD))
> + imx53_nand_start_image();
This should probably be s/is_enabled/IS_ENABLED/ .
mgr
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
