On Thu, Jun 30, 2016 at 10:37:13AM +0200, Alex Vazquez wrote: > Hi and Thanks Sascha. > I've taken a look at the code and seems it's right configuration. > I tried to change the driver and I am using OHCI. > Now I detect the usb hub but if I insert a pen drive give me the next > error: > barebox@Atmel sama5d3_xplained:/ > > # usb > > USB: scanning bus for devices... > > > Bus 000 Device 001: ID 0000:0000 OHCI Root Hub > > ERROR: OHCI Unrecoverable Error, controller usb-ohci disabled > > > Couldn't reset port 2 > > 1 USB Device(s) found > Depending on which port I insert the pen drive detects the error port 2 or > port 3. > I have also checked that the registers and peripheral clocks are set well. > any more suggestions that may be happening? > I think I'm close to finding the problem... I have just found a sama5d3_xplained board here. The good thing is that I can reproduce this issue without problems: It's the same here. Unfortunately I have no idea what's going on. Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
