Gets rid of multiple case statements and chip type checks by
attempting to use a more unified approach to chip differences. Flag
bits are added to the state struct for specific differences.
Combines the checks for OSF and CH bits into a single block for all
chips.
Add some flags the indicate chip features. Use these instead of a
bunch of case statements in different places.
Do a single read of chips registers in probe instead of multiple ones
and place register in matching location in the buffer. Fix bug where
DOSF bit was set in incorrect buffer location.
Signed-off-by: Trent Piepho <tpiepho@xxxxxxxxxxxxxx>
---
drivers/rtc/rtc-ds1307.c | 159 +++++++++++++++++++++++++++--------------------
1 file changed, 90 insertions(+), 69 deletions(-)
diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c
index 5ed64bf..1526273 100644
--- a/drivers/rtc/rtc-ds1307.c
+++ b/drivers/rtc/rtc-ds1307.c
@@ -98,10 +98,26 @@ enum ds_type {
/* Most registers for any device */
#define DS13xx_REG_COUNT 16
-
struct ds1307 {
struct rtc_device rtc;
enum ds_type type;
+ /*
+ * Flags to code chip differences that this code handles.
+ * has_alarms: Chip has alarms, also signifies:
+ * Control register has a different address and format
+ * Seconds register does not have a 'CH' bit
+ * Month register has century bit
+ * osf: Oscillator Stop Flag location
+ * 0 = none
+ * 1..3 = DS13(38|40|37)_BIT_OSF
+ */
+ unsigned has_alarms:1;
+#define OSF_NONE 0
+#define OSF_1338 1
+#define OSF_1340 2
+#define OSF_1337 3
+ unsigned osf:2;
+
struct i2c_client *client;
};
@@ -257,16 +273,10 @@ static int ds1307_set_time(struct rtc_device *rtcdev, struct rtc_time *t)
tmp = t->tm_year - 100;
buf[DS1307_REG_YEAR] = bin2bcd(tmp);
- switch (ds1307->type) {
- case ds_1337:
- case ds_1341:
+ if (ds1307->has_alarms) {
buf[DS1307_REG_MONTH] |= DS1337_BIT_CENTURY;
- break;
- default:
- break;
}
-
dev_dbg(dev, "%s: %7ph\n", "write", buf);
result = ds1307_write_block_data(ds1307->client, DS13xx_REG_TIME_START,
@@ -289,6 +299,8 @@ static int ds1307_probe(struct device_d *dev)
struct ds1307 *ds1307;
int err = -ENODEV;
int tmp;
+ int fault;
+ int nreg;
unsigned char buf[DS13xx_REG_COUNT];
unsigned long driver_data;
const struct device_node *np = dev->device_node;
@@ -303,23 +315,35 @@ static int ds1307_probe(struct device_d *dev)
ds1307->type = driver_data;
switch (ds1307->type) {
+ case ds_1307:
+ nreg = DS1307_REG_CONTROL + 1;
+ break;
+ case ds_1338:
+ nreg = DS1307_REG_CONTROL + 1;
+ ds1307->osf = OSF_1338;
+ break;
case ds_1337:
case ds_1341:
- /* get registers that the "rtc" read below won't read... */
- tmp = ds1307_read_block_data(ds1307->client,
- DS1337_REG_CONTROL, 2, buf);
-
- if (tmp != 2) {
- dev_dbg(&client->dev, "read error %d\n", tmp);
- err = -EIO;
- goto exit;
- }
-
- /* oscillator off? turn it on, so clock can tick. */
- if (buf[0] & DS1337_BIT_nEOSC)
- buf[0] &= ~DS1337_BIT_nEOSC;
+ nreg = DS1337_REG_STATUS + 1;
+ ds1307->osf = OSF_1337;
+ ds1307->has_alarms = 1;
+ break;
+ default:
+ dev_err(&client->dev, "Unknown device type %lu\n", driver_data);
+ err = -ENODEV;
+ goto exit;
+ }
+read_rtc:
+ /* read RTC registers */
+ tmp = ds1307_read_block_data(client, 0, nreg, buf);
+ if (tmp != nreg) {
+ dev_dbg(&client->dev, "read error %d\n", tmp);
+ err = -EIO;
+ goto exit;
+ }
+ if (ds1307->has_alarms) {
/*
Make sure no alarm interrupts or square wave signals
are produced by the chip while we are in
@@ -328,56 +352,36 @@ static int ds1307_probe(struct device_d *dev)
wave generation), but disabling each individual
alarm interrupt source
*/
- buf[0] |= DS1337_BIT_INTCN;
- buf[0] &= ~(DS1337_BIT_A2IE | DS1337_BIT_A1IE);
+ buf[DS1337_REG_CONTROL] |= DS1337_BIT_INTCN;
+ buf[DS1337_REG_CONTROL] &= ~(DS1337_BIT_A2IE | DS1337_BIT_A1IE);
i2c_smbus_write_byte_data(client, DS1337_REG_CONTROL,
- buf[0]);
+ buf[DS1337_REG_CONTROL]);
if (ds1307->type == ds_1341) {
/*
* For the above to be true, DS1341 also has to have
* ECLK bit set to 0
*/
- buf[1] &= ~DS1341_BIT_ECLK;
+ buf[DS1337_REG_STATUS] &= ~DS1341_BIT_ECLK;
/*
* Let's set additionale RTC bits to
* facilitate maximum power saving.
*/
- buf[0] |= DS1341_BIT_DOSF;
- buf[0] &= ~DS1341_BIT_EGFIL;
+ buf[DS1337_REG_STATUS] |= DS1341_BIT_DOSF;
+ buf[DS1337_REG_CONTROL] &= ~DS1341_BIT_EGFIL;
i2c_smbus_write_byte_data(client, DS1337_REG_CONTROL,
- buf[0]);
+ buf[DS1337_REG_CONTROL]);
i2c_smbus_write_byte_data(client, DS1337_REG_STATUS,
- buf[1]);
+ buf[DS1337_REG_STATUS]);
}
-
- /* oscillator fault? clear flag, and warn */
- if (buf[1] & DS1337_BIT_OSF) {
- i2c_smbus_write_byte_data(client, DS1337_REG_STATUS,
- buf[1] & ~DS1337_BIT_OSF);
- dev_warn(&client->dev, "SET TIME!\n");
- }
-
- default:
- break;
- }
-
-read_rtc:
- /* read RTC registers */
- tmp = ds1307_read_block_data(client, 0, 8, buf);
- if (tmp != 8) {
- dev_dbg(&client->dev, "read error %d\n", tmp);
- err = -EIO;
- goto exit;
}
/* Configure clock using OF data if available */
- if (IS_ENABLED(CONFIG_OFDEVICE) && np &&
- ds1307->type != ds_1337 && ds1307->type != ds_1341) {
+ if (IS_ENABLED(CONFIG_OFDEVICE) && np && !ds1307->has_alarms) {
u8 control = buf[DS1307_REG_CONTROL];
u32 rate = 0;
@@ -416,32 +420,49 @@ read_rtc:
}
/* Check for clock halted conditions and start clock */
- tmp = buf[DS1307_REG_SECS];
- switch (ds1307->type) {
- case ds_1307:
- /* clock halted? turn it on, so clock can tick. */
- if (tmp & DS1307_BIT_CH) {
- i2c_smbus_write_byte_data(client, DS1307_REG_SECS, 0);
- dev_warn(&client->dev, "SET TIME!\n");
- goto read_rtc;
+ fault = 0;
+
+ /* clock halted? turn it on, so clock can tick. */
+ if (ds1307->has_alarms) {
+ if (buf[DS1337_REG_CONTROL] & DS1337_BIT_nEOSC) {
+ buf[DS1337_REG_CONTROL] &= ~DS1337_BIT_nEOSC;
+ i2c_smbus_write_byte_data(client, DS1337_REG_CONTROL,
+ buf[DS1337_REG_CONTROL]);
+ fault = 1;
}
- break;
- case ds_1338:
- /* clock halted? turn it on, so clock can tick. */
- if (tmp & DS1307_BIT_CH)
- i2c_smbus_write_byte_data(client, DS1307_REG_SECS, 0);
+ } else {
+ if (buf[DS1307_REG_SECS] & DS1307_BIT_CH) {
+ buf[DS1307_REG_SECS] = 0;
+ i2c_smbus_write_byte_data(client, DS1307_REG_SECS,
+ buf[DS1307_REG_SECS]);
+ fault = 1;
+ }
+ }
- /* oscillator fault? clear flag, and warn */
+ /* Oscillator fault? clear flag and print warning */
+ switch (ds1307->osf) {
+ case OSF_1338:
if (buf[DS1307_REG_CONTROL] & DS1338_BIT_OSF) {
+ buf[DS1307_REG_CONTROL] &= ~DS1338_BIT_OSF;
i2c_smbus_write_byte_data(client, DS1307_REG_CONTROL,
- buf[DS1307_REG_CONTROL]
- & ~DS1338_BIT_OSF);
- dev_warn(&client->dev, "SET TIME!\n");
- goto read_rtc;
+ buf[DS1307_REG_CONTROL]);
+ fault = 1;
}
break;
- default:
+ case OSF_1337:
+ if (buf[DS1337_REG_STATUS] & DS1337_BIT_OSF) {
+ buf[DS1337_REG_STATUS] &= ~DS1337_BIT_OSF;
+ i2c_smbus_write_byte_data(client, DS1337_REG_STATUS,
+ buf[DS1337_REG_STATUS]);
+ fault = 1;
+ }
break;
+ default: ;
+ }
+
+ if (fault) {
+ dev_warn(&client->dev, "SET TIME!\n");
+ goto read_rtc;
}
if (buf[DS1307_REG_HOUR] & DS1307_BIT_12HR) {
--
2.7.0.25.gfc10eb5.dirty
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
